diff mbox series

[V2,5/7] ARM: dts: bcm283x: Increase pwm-cells

Message ID 20230617133620.53129-6-stefan.wahren@i2se.com
State Accepted
Commit 81b875892022181d1d8f9a04416403b307b66754
Headers show
Series ARM: dts: bcm283x: Improve device-trees and bindings | expand

Commit Message

Stefan Wahren June 17, 2023, 1:36 p.m. UTC 
The pwm-bcm2835 supports PWM polarity, so adjust the affected dtsi
files accordingly and fix the dtbs_check warning:

pwm@7e20c000: #pwm-cells:0:0: 3 was expected

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/bcm2711.dtsi | 2 +-
 arch/arm/boot/dts/bcm283x.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Florian Fainelli June 23, 2023, 9 p.m. UTC | #1 
From: Florian Fainelli <f.fainelli@gmail.com>

On Sat, 17 Jun 2023 15:36:18 +0200, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> The pwm-bcm2835 supports PWM polarity, so adjust the affected dtsi
> files accordingly and fix the dtbs_check warning:
> 
> pwm@7e20c000: #pwm-cells:0:0: 3 was expected
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index d30c19311145..4a379a14966d 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -278,7 +278,7 @@  pwm1: pwm@7e20c800 {
 			clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
+			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index c9c52a19ef3b..2ca8a2505a4d 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -416,7 +416,7 @@  pwm: pwm@7e20c000 {
 			clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
+			#pwm-cells = <3>;
 			status = "disabled";
 		};