diff mbox series

[v4,4/4] dt-bindings: firmware: arm,scmi: Add support for pinctrl protocol

Message ID 1dcf25b5c6b16b7138534e3c13827287f7c644cf.1691518314.git.oleksii_moisieiev@epam.com
State Superseded
Headers show
Series firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support | expand

Commit Message

Oleksii Moisieiev Aug. 8, 2023, 6:25 p.m. UTC 
Add new SCMI v3.2 pinctrl protocol bindings definitions and example.

Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>

---
Changes v3 -> v4
  - reworked protocol@19 format
---
 .../bindings/firmware/arm,scmi.yaml           | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)

Comments

Rob Herring Aug. 21, 2023, 4:57 p.m. UTC | #1 
On Tue, Aug 08, 2023 at 06:25:36PM +0000, Oleksii Moisieiev wrote:
> Add new SCMI v3.2 pinctrl protocol bindings definitions and example.
> 
> Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
> 
> ---
> Changes v3 -> v4
>   - reworked protocol@19 format
> ---
>  .../bindings/firmware/arm,scmi.yaml           | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> index 5824c43e9893..5318fe72354e 100644
> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> @@ -233,6 +233,39 @@ properties:
>        reg:
>          const: 0x18
>  
> +  protocol@19:
> +    type: object
> +    allOf:
> +      - $ref: "#/$defs/protocol-node"
> +      - $ref: "../pinctrl/pinctrl.yaml"

/schemas/pinctrl/...

And drop the quotes.

> +    unevaluatedProperties: false
> +
> +    properties:
> +      reg:
> +        const: 0x19
> +
> +      '#pinctrl-cells':

Use either ' or ". You've used both. Go with whatever the rest of the 
doc uses.

> +        const: 0
> +
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        allOf:
> +          - $ref: "../pinctrl/pincfg-node.yaml#"
> +          - $ref: "../pinctrl/pinmux-node.yaml#"

Full path and no quotes.

Surely there's some restrictions on which properties are valid and 
contraints on the values?

> +        unevaluatedProperties: false
> +
> +        description:
> +          A pin multiplexing sub-node describe how to configure a
> +          set of pins is some desired function.
> +          A single sub-node may define several pin configurations.
> +          This sub-node is using default pinctrl bindings to configure
> +          pin multiplexing and using SCMI protocol to apply specified
> +          configuration using SCMI protocol.
> +
> +    required:
> +      - reg
> +
>  additionalProperties: false
>  
>  $defs:
> @@ -384,6 +417,26 @@ examples:
>              scmi_powercap: protocol@18 {
>                  reg = <0x18>;
>              };
> +
> +            scmi_pinctrl: protocol@19 {
> +                reg = <0x19>;
> +                #pinctrl-cells = <0>;
> +
> +                i2c2-pins {
> +                    groups = "i2c2_a", "i2c2_b";
> +                    function = "i2c2";
> +                };
> +
> +                mdio-pins {
> +                    groups = "avb_mdio";
> +                    drive-strength = <24>;
> +                };
> +
> +                keys_pins: keys-pins {
> +                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
> +                    bias-pull-up;
> +                };
> +            };
>          };
>      };
>  
> -- 
> 2.25.1
AKASHI Takahiro Aug. 25, 2023, 1:03 a.m. UTC | #2 
On Tue, Aug 08, 2023 at 06:25:36PM +0000, Oleksii Moisieiev wrote:
> Add new SCMI v3.2 pinctrl protocol bindings definitions and example.
> 
> Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
> 
> ---
> Changes v3 -> v4
>   - reworked protocol@19 format
> ---
>  .../bindings/firmware/arm,scmi.yaml           | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> index 5824c43e9893..5318fe72354e 100644
> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> @@ -233,6 +233,39 @@ properties:
>        reg:
>          const: 0x18
>  
> +  protocol@19:
> +    type: object
> +    allOf:
> +      - $ref: "#/$defs/protocol-node"
> +      - $ref: "../pinctrl/pinctrl.yaml"

Does this rule require that the node name start with "pinctrl" or "pinmux"?
If so, it doesn't match with "protocol@19".

> +    unevaluatedProperties: false
> +
> +    properties:
> +      reg:
> +        const: 0x19
> +
> +      '#pinctrl-cells':
> +        const: 0
> +
> +    patternProperties:
> +      '-pins$':

Is this restriction necessary?
(Most pinctrl's do so, though.)

> +        type: object
> +        allOf:
> +          - $ref: "../pinctrl/pincfg-node.yaml#"
> +          - $ref: "../pinctrl/pinmux-node.yaml#"
> +        unevaluatedProperties: false
> +
> +        description:

I think the description may be a bit ambiguous.

> +          A pin multiplexing sub-node describe how to configure a
> +          set of pins is some desired function.

Even a sub-node that has pin multiplexing definitions may have
pin property/parameter definitions. Right?

> +          A single sub-node may define several pin configurations.

Do you not allow for having a sub-node under a sub-node?

> +          This sub-node is using default pinctrl bindings to configure

Does "default pinctrl bindings" refer to "pinctrl-bindings.txt"?
Is it necessary to specifically mention it here as it is for client devices?


> +          pin multiplexing and using SCMI protocol to apply specified

Again, not only multiplexing but also pin property/parameters.

Thanks,
-Takahiro Akashi

> +          configuration using SCMI protocol.
> +
> +    required:
> +      - reg
> +
>  additionalProperties: false
>  
>  $defs:
> @@ -384,6 +417,26 @@ examples:
>              scmi_powercap: protocol@18 {
>                  reg = <0x18>;
>              };
> +
> +            scmi_pinctrl: protocol@19 {
> +                reg = <0x19>;
> +                #pinctrl-cells = <0>;
> +
> +                i2c2-pins {
> +                    groups = "i2c2_a", "i2c2_b";
> +                    function = "i2c2";
> +                };
> +
> +                mdio-pins {
> +                    groups = "avb_mdio";
> +                    drive-strength = <24>;
> +                };
> +
> +                keys_pins: keys-pins {
> +                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
> +                    bias-pull-up;
> +                };
> +            };
>          };
>      };
>  
> -- 
> 2.25.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5824c43e9893..5318fe72354e 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -233,6 +233,39 @@  properties:
       reg:
         const: 0x18
 
+  protocol@19:
+    type: object
+    allOf:
+      - $ref: "#/$defs/protocol-node"
+      - $ref: "../pinctrl/pinctrl.yaml"
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x19
+
+      '#pinctrl-cells':
+        const: 0
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: "../pinctrl/pincfg-node.yaml#"
+          - $ref: "../pinctrl/pinmux-node.yaml#"
+        unevaluatedProperties: false
+
+        description:
+          A pin multiplexing sub-node describe how to configure a
+          set of pins is some desired function.
+          A single sub-node may define several pin configurations.
+          This sub-node is using default pinctrl bindings to configure
+          pin multiplexing and using SCMI protocol to apply specified
+          configuration using SCMI protocol.
+
+    required:
+      - reg
+
 additionalProperties: false
 
 $defs:
@@ -384,6 +417,26 @@  examples:
             scmi_powercap: protocol@18 {
                 reg = <0x18>;
             };
+
+            scmi_pinctrl: protocol@19 {
+                reg = <0x19>;
+                #pinctrl-cells = <0>;
+
+                i2c2-pins {
+                    groups = "i2c2_a", "i2c2_b";
+                    function = "i2c2";
+                };
+
+                mdio-pins {
+                    groups = "avb_mdio";
+                    drive-strength = <24>;
+                };
+
+                keys_pins: keys-pins {
+                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+                    bias-pull-up;
+                };
+            };
         };
     };