diff mbox series

[v9,3/3] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver

Message ID 20230923143438.1895461-4-j.neuschaefer@gmx.net
State New
Headers show
Series Nuvoton WPCM450 clock and reset driver | expand

Commit Message

J. Neuschäfer Sept. 23, 2023, 2:34 p.m. UTC 
This driver implements the following features w.r.t. the clock and reset
controller in the WPCM450 SoC:

- It calculates the rates for all clocks managed by the clock controller
- It leaves the clock tree mostly unchanged, except that it enables/
  disables clock gates based on usage.
- It exposes the reset lines managed by the controller using the
  Generic Reset Controller subsystem

NOTE: If the driver and the corresponding devicetree node are present,
      the driver will disable "unused" clocks. This is problem until
      the clock relations are properly declared in the devicetree (in a
      later patch). Until then, the clk_ignore_unused kernel parameter
      can be used as a workaround.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---

I have considered converting this driver to a platform driver instead of
using CLK_OF_DECLARE, because platform drivers are generally the way
forward. However, the timer-npcm7xx driver used on the same platform
requires is initialized with TIMER_OF_DECLARE and thus requires the
clocks to be available earlier than a platform driver can provide them.


v9:
- Apply comments made by Stephen Boyd
- Move to drivers/clk/nuvoton/ directory
- Update SPDX license identifier from GPL-2.0 to GPL-2.0-only
- Rename clk_np variable to np
- Use of_clk_hw_register
- Refer to clock parents by .fw_name

v8:
- https://lore.kernel.org/lkml/20230428190226.1304326-3-j.neuschaefer@gmx.net/
- Use %pe format specifier throughout the driver, as suggested by Philipp Zabel
- Add Joel's R-b

v7:
- https://lore.kernel.org/lkml/20230422220240.322572-3-j.neuschaefer@gmx.net/
- Simplify error handling by not deallocating resources

v6:
- Enable RESET_SIMPLE based on ARCH_WPCM450, not ARCH_NPCM, as suggested by Tomer Maimon

v5:
- https://lore.kernel.org/lkml/20221104161850.2889894-6-j.neuschaefer@gmx.net/
- Switch to using clk_parent_data

v4:
- Fix reset controller initialization

v3:
- Change reference clock name from "refclk" to "ref"
- Remove unused variable in return path of wpcm450_clk_register_pll
- Remove unused divisor tables

v2:
- no changes
---
 drivers/clk/Makefile              |   2 +-
 drivers/clk/nuvoton/Kconfig       |   8 +-
 drivers/clk/nuvoton/Makefile      |   1 +
 drivers/clk/nuvoton/clk-wpcm450.c | 372 ++++++++++++++++++++++++++++++
 drivers/reset/Kconfig             |   2 +-
 5 files changed, 382 insertions(+), 3 deletions(-)
 create mode 100644 drivers/clk/nuvoton/clk-wpcm450.c

--
2.40.1

Comments

kernel test robot Sept. 23, 2023, 11:11 p.m. UTC | #1 
Hi Jonathan,

kernel test robot noticed the following build errors:

[auto build test ERROR on clk/clk-next]
[also build test ERROR on robh/for-next pza/reset/next linus/master v6.6-rc2 next-20230921]
[cannot apply to pza/imx-drm/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Jonathan-Neusch-fer/dt-bindings-clock-Add-Nuvoton-WPCM450-clock-reset-controller/20230923-223751
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
patch link:    https://lore.kernel.org/r/20230923143438.1895461-4-j.neuschaefer%40gmx.net
patch subject: [PATCH v9 3/3] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
config: nios2-randconfig-002-20230924 (https://download.01.org/0day-ci/archive/20230924/202309240640.6iNEdfCX-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230924/202309240640.6iNEdfCX-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202309240640.6iNEdfCX-lkp@intel.com/

All errors (new ones prefixed by >>):

   nios2-linux-ld: drivers/clk/nuvoton/clk-wpcm450.o: in function `wpcm450_clk_init':
   clk-wpcm450.c:(.init.text+0x384): undefined reference to `reset_simple_ops'
>> nios2-linux-ld: clk-wpcm450.c:(.init.text+0x388): undefined reference to `reset_simple_ops'
J. Neuschäfer Sept. 24, 2023, 7:51 a.m. UTC | #2 
On Sat, Sep 23, 2023 at 04:34:38PM +0200, Jonathan Neuschäfer wrote:
> This driver implements the following features w.r.t. the clock and reset
> controller in the WPCM450 SoC:
> 
> - It calculates the rates for all clocks managed by the clock controller
> - It leaves the clock tree mostly unchanged, except that it enables/
>   disables clock gates based on usage.
> - It exposes the reset lines managed by the controller using the
>   Generic Reset Controller subsystem
> 
> NOTE: If the driver and the corresponding devicetree node are present,
>       the driver will disable "unused" clocks. This is problem until
>       the clock relations are properly declared in the devicetree (in a
>       later patch). Until then, the clk_ignore_unused kernel parameter
>       can be used as a workaround.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> ---
[...]
> +config CLK_WPCM450
> +	bool "Nuvoton WPCM450 clock/reset controller support"
> +	default y
> +	help
> +	  Build the clock and reset controller driver for the WPCM450 SoC.
> +
[...]
>  config RESET_SIMPLE
>  	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
> -	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
> +	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC || ARCH_WPCM450

Considering the build bot failures and the fragility of adding tons of
platforms to this "default" line, I think I'll just select RESET_CONTROLLER
and RESET_SIMPLE from CLK_WPCM450.

Jonathan
diff mbox series

Patch

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 18969cbd4bb1e..de51182ef630d 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -106,7 +106,7 @@  endif
 obj-y					+= mstar/
 obj-y					+= mvebu/
 obj-$(CONFIG_ARCH_MXS)			+= mxs/
-obj-$(CONFIG_ARCH_MA35)			+= nuvoton/
+obj-y					+= nuvoton/
 obj-$(CONFIG_COMMON_CLK_NXP)		+= nxp/
 obj-$(CONFIG_COMMON_CLK_PISTACHIO)	+= pistachio/
 obj-$(CONFIG_COMMON_CLK_PXA)		+= pxa/
diff --git a/drivers/clk/nuvoton/Kconfig b/drivers/clk/nuvoton/Kconfig
index fe4b7f62f4670..22c5ab409d235 100644
--- a/drivers/clk/nuvoton/Kconfig
+++ b/drivers/clk/nuvoton/Kconfig
@@ -3,7 +3,7 @@ 

 config COMMON_CLK_NUVOTON
 	bool "Nuvoton clock controller common support"
-	depends on ARCH_MA35 || COMPILE_TEST
+	depends on ARCH_MA35 || ARCH_NPCM || COMPILE_TEST
 	default y
 	help
 	  Say y here to enable common clock controller for Nuvoton platforms.
@@ -16,4 +16,10 @@  config CLK_MA35D1
 	help
 	  Build the clock controller driver for MA35D1 SoC.

+config CLK_WPCM450
+	bool "Nuvoton WPCM450 clock/reset controller support"
+	default y
+	help
+	  Build the clock and reset controller driver for the WPCM450 SoC.
+
 endif
diff --git a/drivers/clk/nuvoton/Makefile b/drivers/clk/nuvoton/Makefile
index c3c59dd9f2aaa..b130f0d3889ca 100644
--- a/drivers/clk/nuvoton/Makefile
+++ b/drivers/clk/nuvoton/Makefile
@@ -2,3 +2,4 @@ 
 obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1.o
 obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1-divider.o
 obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1-pll.o
+obj-$(CONFIG_CLK_WPCM450) += clk-wpcm450.o
diff --git a/drivers/clk/nuvoton/clk-wpcm450.c b/drivers/clk/nuvoton/clk-wpcm450.c
new file mode 100644
index 0000000000000..9100c4b8a5648
--- /dev/null
+++ b/drivers/clk/nuvoton/clk-wpcm450.c
@@ -0,0 +1,372 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nuvoton WPCM450 clock and reset controller driver.
+ *
+ * Copyright (C) 2022 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
+
+struct wpcm450_clk_pll {
+	struct clk_hw hw;
+	void __iomem *pllcon;
+	u8 flags;
+};
+
+#define to_wpcm450_clk_pll(_hw) container_of(_hw, struct wpcm450_clk_pll, hw)
+
+#define PLLCON_FBDV	GENMASK(24, 16)
+#define PLLCON_PRST	BIT(13)
+#define PLLCON_PWDEN	BIT(12)
+#define PLLCON_OTDV	GENMASK(10, 8)
+#define PLLCON_INDV	GENMASK(5, 0)
+
+static unsigned long wpcm450_clk_pll_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct wpcm450_clk_pll *pll = to_wpcm450_clk_pll(hw);
+	unsigned long fbdv, indv, otdv;
+	u64 rate;
+	u32 pllcon;
+
+	if (parent_rate == 0)
+		return 0;
+
+	pllcon = readl_relaxed(pll->pllcon);
+
+	indv = FIELD_GET(PLLCON_INDV, pllcon) + 1;
+	fbdv = FIELD_GET(PLLCON_FBDV, pllcon) + 1;
+	otdv = FIELD_GET(PLLCON_OTDV, pllcon) + 1;
+
+	rate = (u64)parent_rate * fbdv;
+	do_div(rate, indv * otdv);
+
+	return rate;
+}
+
+static int wpcm450_clk_pll_is_enabled(struct clk_hw *hw)
+{
+	struct wpcm450_clk_pll *pll = to_wpcm450_clk_pll(hw);
+	u32 pllcon;
+
+	pllcon = readl_relaxed(pll->pllcon);
+
+	return !(pllcon & PLLCON_PRST);
+}
+
+static void wpcm450_clk_pll_disable(struct clk_hw *hw)
+{
+	struct wpcm450_clk_pll *pll = to_wpcm450_clk_pll(hw);
+	u32 pllcon;
+
+	pllcon = readl_relaxed(pll->pllcon);
+	pllcon |= PLLCON_PRST | PLLCON_PWDEN;
+	writel(pllcon, pll->pllcon);
+}
+
+static const struct clk_ops wpcm450_clk_pll_ops = {
+	.recalc_rate = wpcm450_clk_pll_recalc_rate,
+	.is_enabled = wpcm450_clk_pll_is_enabled,
+	.disable = wpcm450_clk_pll_disable
+};
+
+static struct clk_hw *
+wpcm450_clk_register_pll(struct device_node *np, void __iomem *pllcon, const char *name,
+			 const struct clk_parent_data *parent, unsigned long flags)
+{
+	struct wpcm450_clk_pll *pll;
+	struct clk_init_data init = {};
+	int ret;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &wpcm450_clk_pll_ops;
+	init.parent_data = parent;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	pll->pllcon = pllcon;
+	pll->hw.init = &init;
+
+	ret = of_clk_hw_register(np, &pll->hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	return &pll->hw;
+}
+
+#define REG_CLKEN	0x00
+#define REG_CLKSEL	0x04
+#define REG_CLKDIV	0x08
+#define REG_PLLCON0	0x0c
+#define REG_PLLCON1	0x10
+#define REG_PMCON	0x14
+#define REG_IRQWAKECON	0x18
+#define REG_IRQWAKEFLAG	0x1c
+#define REG_IPSRST	0x20
+
+struct wpcm450_pll_data {
+	const char *name;
+	struct clk_parent_data parent;
+	unsigned int reg;
+	unsigned long flags;
+};
+
+static const struct wpcm450_pll_data pll_data[] = {
+	{ "pll0", { .fw_name = "ref" }, REG_PLLCON0, 0 },
+	{ "pll1", { .fw_name = "ref" }, REG_PLLCON1, 0 },
+};
+
+struct wpcm450_clksel_data {
+	const char *name;
+	const struct clk_parent_data *parents;
+	unsigned int num_parents;
+	const u32 *table;
+	int shift;
+	int width;
+	int index;
+	unsigned long flags;
+};
+
+static const u32 parent_table[] = { 0, 1, 2 };
+
+static const struct clk_parent_data default_parents[] = {
+	{ .name = "pll0" },
+	{ .name = "pll1" },
+	{ .name = "ref" },
+};
+
+static const struct clk_parent_data huart_parents[] = {
+	{ .fw_name = "ref" },
+	{ .name = "refdiv2" },
+};
+
+static const struct wpcm450_clksel_data clksel_data[] = {
+	{ "cpusel", default_parents, ARRAY_SIZE(default_parents),
+		parent_table, 0, 2, -1, CLK_IS_CRITICAL },
+	{ "clkout", default_parents, ARRAY_SIZE(default_parents),
+		parent_table, 2, 2, -1, 0 },
+	{ "usbphy", default_parents, ARRAY_SIZE(default_parents),
+		parent_table, 6, 2, -1, 0 },
+	{ "uartsel", default_parents, ARRAY_SIZE(default_parents),
+		parent_table, 8, 2, WPCM450_CLK_USBPHY, 0 },
+	{ "huartsel", huart_parents, ARRAY_SIZE(huart_parents),
+		parent_table, 10, 1, -1, 0 },
+};
+
+static const struct clk_div_table div_fixed2[] = {
+	{ .val = 0, .div = 2 },
+	{ }
+};
+
+struct wpcm450_clkdiv_data {
+	const char *name;
+	struct clk_parent_data parent;
+	int div_flags;
+	const struct clk_div_table *table;
+	int shift;
+	int width;
+	unsigned long flags;
+};
+
+static struct wpcm450_clkdiv_data clkdiv_data_early[] = {
+	{ "refdiv2", { .name = "ref" }, 0, div_fixed2, 0, 0 },
+};
+
+static const struct wpcm450_clkdiv_data clkdiv_data[] = {
+	{ "cpu", { .name = "cpusel" }, 0, div_fixed2, 0, 0, CLK_IS_CRITICAL },
+	{ "adcdiv", { .name = "ref" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 28, 2, 0 },
+	{ "apb", { .name = "ahb" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 26, 2, 0 },
+	{ "ahb", { .name = "cpu" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 24, 2, 0 },
+	{ "uart", { .name = "uartsel" }, 0, NULL, 16, 4, 0 },
+	{ "ahb3", { .name = "ahb" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 8, 2, 0 },
+};
+
+struct wpcm450_clken_data {
+	const char *name;
+	struct clk_parent_data parent;
+	int bitnum;
+	unsigned long flags;
+};
+
+static const struct wpcm450_clken_data clken_data[] = {
+	{ "fiu", { .name = "ahb3" }, WPCM450_CLK_FIU, 0 },
+	{ "xbus", { .name = "ahb3" }, WPCM450_CLK_XBUS, 0 },
+	{ "kcs", { .name = "apb" }, WPCM450_CLK_KCS, 0 },
+	{ "shm", { .name = "ahb3" }, WPCM450_CLK_SHM, 0 },
+	{ "usb1", { .name = "ahb" }, WPCM450_CLK_USB1, 0 },
+	{ "emc0", { .name = "ahb" }, WPCM450_CLK_EMC0, 0 },
+	{ "emc1", { .name = "ahb" }, WPCM450_CLK_EMC1, 0 },
+	{ "usb0", { .name = "ahb" }, WPCM450_CLK_USB0, 0 },
+	{ "peci", { .name = "apb" }, WPCM450_CLK_PECI, 0 },
+	{ "aes", { .name = "apb" }, WPCM450_CLK_AES, 0 },
+	{ "uart0", { .name = "uart" }, WPCM450_CLK_UART0, 0 },
+	{ "uart1", { .name = "uart" }, WPCM450_CLK_UART1, 0 },
+	{ "smb2", { .name = "apb" }, WPCM450_CLK_SMB2, 0 },
+	{ "smb3", { .name = "apb" }, WPCM450_CLK_SMB3, 0 },
+	{ "smb4", { .name = "apb" }, WPCM450_CLK_SMB4, 0 },
+	{ "smb5", { .name = "apb" }, WPCM450_CLK_SMB5, 0 },
+	{ "huart", { .name = "huartsel" }, WPCM450_CLK_HUART, 0 },
+	{ "pwm", { .name = "apb" }, WPCM450_CLK_PWM, 0 },
+	{ "timer0", { .name = "refdiv2" }, WPCM450_CLK_TIMER0, 0 },
+	{ "timer1", { .name = "refdiv2" }, WPCM450_CLK_TIMER1, 0 },
+	{ "timer2", { .name = "refdiv2" }, WPCM450_CLK_TIMER2, 0 },
+	{ "timer3", { .name = "refdiv2" }, WPCM450_CLK_TIMER3, 0 },
+	{ "timer4", { .name = "refdiv2" }, WPCM450_CLK_TIMER4, 0 },
+	{ "mft0", { .name = "apb" }, WPCM450_CLK_MFT0, 0 },
+	{ "mft1", { .name = "apb" }, WPCM450_CLK_MFT1, 0 },
+	{ "wdt", { .name = "refdiv2" }, WPCM450_CLK_WDT, 0 },
+	{ "adc", { .name = "adcdiv" }, WPCM450_CLK_ADC, 0 },
+	{ "sdio", { .name = "ahb" }, WPCM450_CLK_SDIO, 0 },
+	{ "sspi", { .name = "apb" }, WPCM450_CLK_SSPI, 0 },
+	{ "smb0", { .name = "apb" }, WPCM450_CLK_SMB0, 0 },
+	{ "smb1", { .name = "apb" }, WPCM450_CLK_SMB1, 0 },
+};
+
+static DEFINE_SPINLOCK(wpcm450_clk_lock);
+
+/*
+ * NOTE: Error handling is very rudimentary here. If the clock driver initial-
+ * ization fails, the system is probably in bigger trouble than what is caused
+ * by a few leaked resources.
+ */
+
+static void __init wpcm450_clk_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	static struct clk_hw **hws;
+	static struct clk_hw *hw;
+	void __iomem *clk_base;
+	int i, ret;
+	struct reset_simple_data *reset;
+
+	clk_base = of_iomap(np, 0);
+	if (!clk_base) {
+		pr_err("%pOFP: failed to map registers\n", np);
+		of_node_put(np);
+		return;
+	}
+	of_node_put(np);
+
+	clk_data = kzalloc(struct_size(clk_data, hws, WPCM450_NUM_CLKS), GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = WPCM450_NUM_CLKS;
+	hws = clk_data->hws;
+
+	for (i = 0; i < WPCM450_NUM_CLKS; i++)
+		hws[i] = ERR_PTR(-ENOENT);
+
+	/* PLLs */
+	for (i = 0; i < ARRAY_SIZE(pll_data); i++) {
+		const struct wpcm450_pll_data *data = &pll_data[i];
+
+		hw = wpcm450_clk_register_pll(np, clk_base + data->reg, data->name,
+					      &data->parent, data->flags);
+		if (IS_ERR(hw)) {
+			pr_info("Failed to register PLL: %pe\n", hw);
+			return;
+		}
+	}
+
+	/* Early divisors (REF/2) */
+	for (i = 0; i < ARRAY_SIZE(clkdiv_data_early); i++) {
+		const struct wpcm450_clkdiv_data *data = &clkdiv_data_early[i];
+
+		hw = clk_hw_register_divider_table_parent_data(NULL, data->name, &data->parent,
+							       data->flags, clk_base + REG_CLKDIV,
+							       data->shift, data->width,
+							       data->div_flags, data->table,
+							       &wpcm450_clk_lock);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register div table: %pe\n", hw);
+			return;
+		}
+	}
+
+	/* Selects/muxes */
+	for (i = 0; i < ARRAY_SIZE(clksel_data); i++) {
+		const struct wpcm450_clksel_data *data = &clksel_data[i];
+
+		hw = clk_hw_register_mux_parent_data(NULL, data->name, data->parents,
+						     data->num_parents, data->flags,
+						     clk_base + REG_CLKSEL, data->shift,
+						     data->width, 0,
+						     &wpcm450_clk_lock);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register mux: %pe\n", hw);
+			return;
+		}
+		if (data->index >= 0)
+			clk_data->hws[data->index] = hw;
+	}
+
+	/* Divisors */
+	for (i = 0; i < ARRAY_SIZE(clkdiv_data); i++) {
+		const struct wpcm450_clkdiv_data *data = &clkdiv_data[i];
+
+		hw = clk_hw_register_divider_table_parent_data(NULL, data->name, &data->parent,
+							       data->flags, clk_base + REG_CLKDIV,
+							       data->shift, data->width,
+							       data->div_flags, data->table,
+							       &wpcm450_clk_lock);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register divider: %pe\n", hw);
+			return;
+		}
+	}
+
+	/* Enables/gates */
+	for (i = 0; i < ARRAY_SIZE(clken_data); i++) {
+		const struct wpcm450_clken_data *data = &clken_data[i];
+
+		hw = clk_hw_register_gate_parent_data(NULL, data->name, &data->parent, data->flags,
+						      clk_base + REG_CLKEN, data->bitnum,
+						      data->flags, &wpcm450_clk_lock);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register gate: %pe\n", hw);
+			return;
+		}
+		clk_data->hws[data->bitnum] = hw;
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+	if (ret)
+		pr_err("Failed to add DT provider: %pe\n", ERR_PTR(ret));
+
+	/* Reset controller */
+	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return;
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = WPCM450_NUM_RESETS;
+	reset->rcdev.ops = &reset_simple_ops;
+	reset->rcdev.of_node = np;
+	reset->membase = clk_base + REG_IPSRST;
+	ret = reset_controller_register(&reset->rcdev);
+	if (ret)
+		pr_err("Failed to register reset controller: %pe\n", ERR_PTR(ret));
+
+	of_node_put(np);
+}
+
+CLK_OF_DECLARE(wpcm450_clk_init, "nuvoton,wpcm450-clk", wpcm450_clk_init);
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index ccd59ddd76100..1975e2f2e9e84 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -213,7 +213,7 @@  config RESET_SCMI

 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC || ARCH_WPCM450
 	depends on HAS_IOMEM
 	help
 	  This enables a simple reset controller driver for reset lines that