| Message ID | 20230928151631.149333-1-jcmvbkbc@gmail.com |
|---|---|
| Headers | show |
| Series | serial: add drivers for the ESP32xx serial devices | expand |
On Thu, 28 Sep 2023, Max Filippov wrote: > uart_get_baud_rate has input parameters 'min' and 'max' limiting the > range of acceptable baud rates from the caller's perspective. If neither > current or old termios structures have acceptable baud rate setting and > 9600 is not in the min/max range either the function returns 0 and > issues a warning. > However for a UART that does not support speed of 9600 baud this is > expected behavior. > Clarify that 0 can be (and always could be) returned from the > uart_get_baud_rate. Don't issue a warning in that case. > Move the warinng to the uart_get_divisor instead, which is often called > with the uart_get_baud_rate return value. > > Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> > --- > Changes v3->v4: > - drop WARN_ON from uart_get_divisor() > > drivers/tty/serial/serial_core.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c > index 7bdc21d5e13b..3f130fe9f1a0 100644 > --- a/drivers/tty/serial/serial_core.c > +++ b/drivers/tty/serial/serial_core.c > @@ -431,7 +431,7 @@ EXPORT_SYMBOL(uart_update_timeout); > * baud. > * > * If the new baud rate is invalid, try the @old termios setting. If it's still > - * invalid, we try 9600 baud. > + * invalid, we try 9600 baud. If that is also invalid 0 is returned. > * > * The @termios structure is updated to reflect the baud rate we're actually > * going to be using. Don't do this for the case where B0 is requested ("hang > @@ -515,8 +515,6 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, > max - 1, max - 1); > } > } > - /* Should never happen */ > - WARN_ON(1); > return 0; > } > EXPORT_SYMBOL(uart_get_baud_rate); While looking into this, I found this old commit: commit 16ae2a877bf4179737921235e85ceffd7b79354f Author: Alan Cox <alan@linux.intel.com> Date: Mon Jan 4 16:26:21 2010 +0000 serial: Fix crash if the minimum rate of the device is > 9600 baud In that situation if the old rate is invalid and the new rate is invalid and the chip cannot do 9600 baud we report zero, which makes all the drivers explode. Instead force the rate based on min/max But for some reason it does not work as advertized here? What is the exact cause for that? Is something wrong with how min/max have that +1/-1 there or what?
On Thu, Sep 28, 2023 at 08:16:27AM -0700, Max Filippov wrote: > uart_get_baud_rate has input parameters 'min' and 'max' limiting the > range of acceptable baud rates from the caller's perspective. If neither > current or old termios structures have acceptable baud rate setting and > 9600 is not in the min/max range either the function returns 0 and > issues a warning. > However for a UART that does not support speed of 9600 baud this is > expected behavior. > Clarify that 0 can be (and always could be) returned from the > uart_get_baud_rate. Don't issue a warning in that case. > Move the warinng to the uart_get_divisor instead, which is often called > with the uart_get_baud_rate return value. This doesn't match up with the patch contents anymore :(
On Thu, Sep 28, 2023 at 08:16:31AM -0700, Max Filippov wrote: > Add driver for the ACM controller of the Espressif ESP32S3 Soc. Odd extra space :( > Hardware specification is available at the following URL: > > https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf > (Chapter 33 USB Serial/JTAG Controller) I don't understand this driver, "ACM" is a USB host <-> gadget protocol, why do you need a platform serial driver for this? > > Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> > --- > Changes v2->v3: > - use HZ instead of msecs_to_jiffies(1000) in esp32_acm_put_char_sync > - add early return to esp32_acm_transmit_buffer > - use request_irq/free_irq instead of devm_* versions > > Changes v1->v2: > - redefine register fields using BIT and GENMASK > - drop _MASK suffix from register field definitions > - drop *_SHIFT definitions where possible > - split register reads/writes and bitwise operations into multiple lines > - use u8 instead of unsigned char in internal functions > - add timeout to esp32_acm_put_char_sync > - use uart_port_tx_limited in esp32_acm_transmit_buffer > - use IRQ_RETVAL in esp32_acm_int > - drop esp32s3_acm_console_putchar and esp32s3_acm_earlycon_putchar > - turn num_read into unsigned int in esp32_acm_earlycon_read > - drop MODULE_DESCRIPTION > > drivers/tty/serial/Kconfig | 14 + > drivers/tty/serial/Makefile | 1 + > drivers/tty/serial/esp32_acm.c | 459 +++++++++++++++++++++++++++++++ > include/uapi/linux/serial_core.h | 3 + > 4 files changed, 477 insertions(+) > create mode 100644 drivers/tty/serial/esp32_acm.c > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index d9ca6b268f01..85807db8f7ce 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -1591,6 +1591,20 @@ config SERIAL_ESP32 > earlycon=esp32s3uart,mmio32,0x60000000,115200n8,40000000 > earlycon=esp32uart,mmio32,0x3ff40000,115200n8 > > +config SERIAL_ESP32_ACM > + tristate "Espressif ESP32 USB ACM support" > + depends on XTENSA_PLATFORM_ESP32 || (COMPILE_TEST && OF) > + select SERIAL_CORE > + select SERIAL_CORE_CONSOLE > + select SERIAL_EARLYCON > + help > + Driver for the CDC ACM controllers of the Espressif ESP32S3 SoCs > + that share separate USB controller with the JTAG adapter. > + The device name used for this controller is ttyACM. > + When earlycon option is enabled the following kernel command line > + snippet may be used: > + earlycon=esp32s3acm,mmio32,0x60038000 > + > endmenu > > config SERIAL_MCTRL_GPIO > diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile > index 7b73137df7f3..970a292ca418 100644 > --- a/drivers/tty/serial/Makefile > +++ b/drivers/tty/serial/Makefile > @@ -89,6 +89,7 @@ obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o > obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o > obj-$(CONFIG_SERIAL_SUNPLUS) += sunplus-uart.o > obj-$(CONFIG_SERIAL_ESP32) += esp32_uart.o > +obj-$(CONFIG_SERIAL_ESP32_ACM) += esp32_acm.o > > # GPIOLIB helpers for modem control lines > obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o > diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c > new file mode 100644 > index 000000000000..f02abd2ac65e > --- /dev/null > +++ b/drivers/tty/serial/esp32_acm.c > @@ -0,0 +1,459 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later Why "or later"? I have to ask, sorry. And no copyright information? That's fine, but be sure your company's lawyers are ok with it... > + > +#include <linux/bitfield.h> > +#include <linux/bits.h> > +#include <linux/console.h> > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/irq.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/serial_core.h> > +#include <linux/slab.h> > +#include <linux/tty_flip.h> > +#include <asm/serial.h> > + > +#define DRIVER_NAME "esp32s3-acm" > +#define DEV_NAME "ttyACM" There is already a ttyACM driver in the kernel, will this conflict with that one? And are you using the same major/minor numbers for it as well? If so, how is this going to work? > +#define UART_NR 4 > + > +#define ESP32S3_ACM_TX_FIFO_SIZE 64 > + > +#define USB_SERIAL_JTAG_EP1_REG 0x00 > +#define USB_SERIAL_JTAG_EP1_CONF_REG 0x04 > +#define USB_SERIAL_JTAG_WR_DONE BIT(0) > +#define USB_SERIAL_JTAG_SERIAL_IN_EP_DATA_FREE BIT(1) > +#define USB_SERIAL_JTAG_INT_ST_REG 0x0c > +#define USB_SERIAL_JTAG_SERIAL_OUT_RECV_PKT_INT_ST BIT(2) > +#define USB_SERIAL_JTAG_SERIAL_IN_EMPTY_INT_ST BIT(3) > +#define USB_SERIAL_JTAG_INT_ENA_REG 0x10 > +#define USB_SERIAL_JTAG_SERIAL_OUT_RECV_PKT_INT_ENA BIT(2) > +#define USB_SERIAL_JTAG_SERIAL_IN_EMPTY_INT_ENA BIT(3) > +#define USB_SERIAL_JTAG_INT_CLR_REG 0x14 > +#define USB_SERIAL_JTAG_IN_EP1_ST_REG 0x2c > +#define USB_SERIAL_JTAG_IN_EP1_WR_ADDR GENMASK(8, 2) > +#define USB_SERIAL_JTAG_OUT_EP1_ST_REG 0x3c > +#define USB_SERIAL_JTAG_OUT_EP1_REC_DATA_CNT GENMASK(22, 16) > + > +static const struct of_device_id esp32s3_acm_dt_ids[] = { > + { > + .compatible = "esp,esp32s3-acm", > + }, { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, esp32s3_acm_dt_ids); > + > +static struct uart_port *esp32s3_acm_ports[UART_NR]; > + > +static void esp32s3_acm_write(struct uart_port *port, unsigned long reg, u32 v) > +{ > + writel(v, port->membase + reg); > +} > + > +static u32 esp32s3_acm_read(struct uart_port *port, unsigned long reg) > +{ > + return readl(port->membase + reg); > +} > + > +static u32 esp32s3_acm_tx_fifo_free(struct uart_port *port) > +{ > + u32 status = esp32s3_acm_read(port, USB_SERIAL_JTAG_EP1_CONF_REG); > + > + return status & USB_SERIAL_JTAG_SERIAL_IN_EP_DATA_FREE; > +} > + > +static u32 esp32s3_acm_tx_fifo_cnt(struct uart_port *port) > +{ > + u32 status = esp32s3_acm_read(port, USB_SERIAL_JTAG_IN_EP1_ST_REG); > + > + return FIELD_GET(USB_SERIAL_JTAG_IN_EP1_WR_ADDR, status); > +} > + > +static u32 esp32s3_acm_rx_fifo_cnt(struct uart_port *port) > +{ > + u32 status = esp32s3_acm_read(port, USB_SERIAL_JTAG_OUT_EP1_ST_REG); > + > + return FIELD_GET(USB_SERIAL_JTAG_OUT_EP1_REC_DATA_CNT, status); > +} > + > +/* return TIOCSER_TEMT when transmitter is not busy */ > +static unsigned int esp32s3_acm_tx_empty(struct uart_port *port) > +{ > + return esp32s3_acm_tx_fifo_cnt(port) == 0 ? TIOCSER_TEMT : 0; > +} > + > +static void esp32s3_acm_set_mctrl(struct uart_port *port, unsigned int mctrl) > +{ > +} Do you have to have empty functions for callbacks that do nothing? > --- a/include/uapi/linux/serial_core.h > +++ b/include/uapi/linux/serial_core.h > @@ -248,4 +248,7 @@ > /* Espressif ESP32 UART */ > #define PORT_ESP32UART 124 > > +/* Espressif ESP32 ACM */ > +#define PORT_ESP32ACM 125 Why are these defines needed? What in userspace is going to require them? If nothing, please do not add them. thanks, greg k-h
On Tue, Oct 3, 2023 at 5:55 AM Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > > On Thu, Sep 28, 2023 at 08:16:31AM -0700, Max Filippov wrote: > > Add driver for the ACM controller of the Espressif ESP32S3 Soc. > > Odd extra space :( Ok. > > Hardware specification is available at the following URL: > > > > https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf > > (Chapter 33 USB Serial/JTAG Controller) > > I don't understand this driver, "ACM" is a USB host <-> gadget protocol, > why do you need a platform serial driver for this? The USB part of this piece of hardware is fixed and not controllable, so all we have is a very limited UART interface. But to the outside world it's a USB device with the CDC-ACM interface. > > diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c > > new file mode 100644 > > index 000000000000..f02abd2ac65e > > --- /dev/null > > +++ b/drivers/tty/serial/esp32_acm.c > > @@ -0,0 +1,459 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > Why "or later"? I have to ask, sorry. I don't really have a preference here. Is there a reason to choose GPL-2.0 only for a new code? > And no copyright information? That's fine, but be sure your company's > lawyers are ok with it... There's no company behind this, just myself. > > + > > +#include <linux/bitfield.h> > > +#include <linux/bits.h> > > +#include <linux/console.h> > > +#include <linux/delay.h> > > +#include <linux/io.h> > > +#include <linux/irq.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > +#include <linux/serial_core.h> > > +#include <linux/slab.h> > > +#include <linux/tty_flip.h> > > +#include <asm/serial.h> > > + > > +#define DRIVER_NAME "esp32s3-acm" > > +#define DEV_NAME "ttyACM" > > There is already a ttyACM driver in the kernel, will this conflict with > that one? And are you using the same major/minor numbers for it as > well? If so, how is this going to work? I'll rename it to ttyS. I see that it coexists with the other driver that calls its devices ttyS just fine. > > +static void esp32s3_acm_set_mctrl(struct uart_port *port, unsigned int mctrl) > > +{ > > +} > > Do you have to have empty functions for callbacks that do nothing? The serial core has unconditional calls to these callbacks. > > --- a/include/uapi/linux/serial_core.h > > +++ b/include/uapi/linux/serial_core.h > > @@ -248,4 +248,7 @@ > > /* Espressif ESP32 UART */ > > #define PORT_ESP32UART 124 > > > > +/* Espressif ESP32 ACM */ > > +#define PORT_ESP32ACM 125 > > Why are these defines needed? What in userspace is going to require > them? If nothing, please do not add them. I don't understand what the alternatives are. The comment for the uart_ops::config_port() callback says that port->type should be set to the type of the port found, and I see that almost every serial driver defines a unique PORT_* for that.
On Tue, Oct 03, 2023 at 12:46:46PM -0700, Max Filippov wrote: > > > Hardware specification is available at the following URL: > > > > > > https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf > > > (Chapter 33 USB Serial/JTAG Controller) > > > > I don't understand this driver, "ACM" is a USB host <-> gadget protocol, > > why do you need a platform serial driver for this? > > The USB part of this piece of hardware is fixed and not controllable, so > all we have is a very limited UART interface. But to the outside world > it's a USB device with the CDC-ACM interface. Where is the "outside world" here? The other end of the tty connection? So this is a "ACM gadget"? If so, please try to use that term as that's what we use in the kernel to keep things straight. > > > diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c > > > new file mode 100644 > > > index 000000000000..f02abd2ac65e > > > --- /dev/null > > > +++ b/drivers/tty/serial/esp32_acm.c > > > @@ -0,0 +1,459 @@ > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > Why "or later"? I have to ask, sorry. > > I don't really have a preference here. Is there a reason to choose > GPL-2.0 only for a new code? It's your call, you need to pick that, but I can provide recommendations if you want :) > > And no copyright information? That's fine, but be sure your company's > > lawyers are ok with it... > > There's no company behind this, just myself. Great, it's your copyright, be proud, put it on there! > > > + > > > +#include <linux/bitfield.h> > > > +#include <linux/bits.h> > > > +#include <linux/console.h> > > > +#include <linux/delay.h> > > > +#include <linux/io.h> > > > +#include <linux/irq.h> > > > +#include <linux/module.h> > > > +#include <linux/of.h> > > > +#include <linux/of_device.h> > > > +#include <linux/serial_core.h> > > > +#include <linux/slab.h> > > > +#include <linux/tty_flip.h> > > > +#include <asm/serial.h> > > > + > > > +#define DRIVER_NAME "esp32s3-acm" > > > +#define DEV_NAME "ttyACM" > > > > There is already a ttyACM driver in the kernel, will this conflict with > > that one? And are you using the same major/minor numbers for it as > > well? If so, how is this going to work? > > I'll rename it to ttyS. I see that it coexists with the other driver that calls > its devices ttyS just fine. Great. But if you are going to be like a ACM gadget, use ttyGS like that driver does? > > > +static void esp32s3_acm_set_mctrl(struct uart_port *port, unsigned int mctrl) > > > +{ > > > +} > > > > Do you have to have empty functions for callbacks that do nothing? > > The serial core has unconditional calls to these callbacks. Ah, good catch, maybe we should fix up the serial core. > > > --- a/include/uapi/linux/serial_core.h > > > +++ b/include/uapi/linux/serial_core.h > > > @@ -248,4 +248,7 @@ > > > /* Espressif ESP32 UART */ > > > #define PORT_ESP32UART 124 > > > > > > +/* Espressif ESP32 ACM */ > > > +#define PORT_ESP32ACM 125 > > > > Why are these defines needed? What in userspace is going to require > > them? If nothing, please do not add them. > > I don't understand what the alternatives are. The comment for the > uart_ops::config_port() callback says that port->type should be set > to the type of the port found, and I see that almost every serial driver > defines a unique PORT_* for that. Yes, but not all do. If you don't need to do anything special, it can just claim to be a normal device, we've had threads about this on the list before. If you don't need to determine in userspace from the tty connection what device it is, just use the default one instead. thanks, greg k-h
On Thu, Oct 5, 2023 at 11:57 AM Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > On Tue, Oct 03, 2023 at 12:46:46PM -0700, Max Filippov wrote: > > > > Hardware specification is available at the following URL: > > > > > > > > https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf > > > > (Chapter 33 USB Serial/JTAG Controller) > > > > > > I don't understand this driver, "ACM" is a USB host <-> gadget protocol, > > > why do you need a platform serial driver for this? > > > > The USB part of this piece of hardware is fixed and not controllable, so > > all we have is a very limited UART interface. But to the outside world > > it's a USB device with the CDC-ACM interface. > > Where is the "outside world" here? The other end of the tty connection? Yes. > So this is a "ACM gadget"? If so, please try to use that term as that's > what we use in the kernel to keep things straight. Ok. > > > > diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c > > > > new file mode 100644 > > > > index 000000000000..f02abd2ac65e > > > > --- /dev/null > > > > +++ b/drivers/tty/serial/esp32_acm.c > > > > @@ -0,0 +1,459 @@ > > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > > > Why "or later"? I have to ask, sorry. > > > > I don't really have a preference here. Is there a reason to choose > > GPL-2.0 only for a new code? > > It's your call, you need to pick that, but I can provide recommendations > if you want :) Please do? > > > And no copyright information? That's fine, but be sure your company's > > > lawyers are ok with it... > > > > There's no company behind this, just myself. > > Great, it's your copyright, be proud, put it on there! If I don't have to I'd rather not. This is just a piece of meaningless noise. > > > > +#define DEV_NAME "ttyACM" > > > > > > There is already a ttyACM driver in the kernel, will this conflict with > > > that one? And are you using the same major/minor numbers for it as > > > well? If so, how is this going to work? > > > > I'll rename it to ttyS. I see that it coexists with the other driver that calls > > its devices ttyS just fine. > > Great. But if you are going to be like a ACM gadget, use ttyGS like > that driver does? Ok. > > > > --- a/include/uapi/linux/serial_core.h > > > > +++ b/include/uapi/linux/serial_core.h > > > > @@ -248,4 +248,7 @@ > > > > /* Espressif ESP32 UART */ > > > > #define PORT_ESP32UART 124 > > > > > > > > +/* Espressif ESP32 ACM */ > > > > +#define PORT_ESP32ACM 125 > > > > > > Why are these defines needed? What in userspace is going to require > > > them? If nothing, please do not add them. > > > > I don't understand what the alternatives are. The comment for the > > uart_ops::config_port() callback says that port->type should be set > > to the type of the port found, and I see that almost every serial driver > > defines a unique PORT_* for that. > > Yes, but not all do. If you don't need to do anything special, it can > just claim to be a normal device, we've had threads about this on the > list before. If you don't need to determine in userspace from the tty > connection what device it is, just use the default one instead. Ok, it looks like having #define PORT_ESP32ACM (-1) in the driver source should be ok? I've tested that it works.
On Thu, Oct 05, 2023 at 02:21:55PM -0700, Max Filippov wrote: > On Thu, Oct 5, 2023 at 11:57 AM Greg Kroah-Hartman > > > > > --- /dev/null > > > > > +++ b/drivers/tty/serial/esp32_acm.c > > > > > @@ -0,0 +1,459 @@ > > > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > > > > > Why "or later"? I have to ask, sorry. > > > > > > I don't really have a preference here. Is there a reason to choose > > > GPL-2.0 only for a new code? > > > > It's your call, you need to pick that, but I can provide recommendations > > if you want :) > > Please do? If you only want your code being used in Linux, then stick with "GPL-2.0". If you want your code to be able to be copied into other GPLv3 licensed code bodies (like Hurd and others), then license it as "GPL-2.0-or-later". Your call. > > > > And no copyright information? That's fine, but be sure your company's > > > > lawyers are ok with it... > > > > > > There's no company behind this, just myself. > > > > Great, it's your copyright, be proud, put it on there! > > If I don't have to I'd rather not. This is just a piece of meaningless noise. You already own the copyright by virtue of creating the code (you can't give it away), so might as well put your mark on it to make it more noticable. But it's not required, if you don't want to, no one can force you, again, your call. > > > > > --- a/include/uapi/linux/serial_core.h > > > > > +++ b/include/uapi/linux/serial_core.h > > > > > @@ -248,4 +248,7 @@ > > > > > /* Espressif ESP32 UART */ > > > > > #define PORT_ESP32UART 124 > > > > > > > > > > +/* Espressif ESP32 ACM */ > > > > > +#define PORT_ESP32ACM 125 > > > > > > > > Why are these defines needed? What in userspace is going to require > > > > them? If nothing, please do not add them. > > > > > > I don't understand what the alternatives are. The comment for the > > > uart_ops::config_port() callback says that port->type should be set > > > to the type of the port found, and I see that almost every serial driver > > > defines a unique PORT_* for that. > > > > Yes, but not all do. If you don't need to do anything special, it can > > just claim to be a normal device, we've had threads about this on the > > list before. If you don't need to determine in userspace from the tty > > connection what device it is, just use the default one instead. > > Ok, it looks like having > > #define PORT_ESP32ACM (-1) > > in the driver source should be ok? I've tested that it works. Hah, I like that hack. But why not just use PORT_UNKNOWN? thanks, greg k-h
On Fri, Oct 6, 2023 at 2:34 AM Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > If you only want your code being used in Linux, then stick with > "GPL-2.0". If you want your code to be able to be copied into other > GPLv3 licensed code bodies (like Hurd and others), then license it as > "GPL-2.0-or-later". Your call. Thanks. From that point of view I prefer GPL-2.0-or-later. > > > Yes, but not all do. If you don't need to do anything special, it can > > > just claim to be a normal device, we've had threads about this on the > > > list before. If you don't need to determine in userspace from the tty > > > connection what device it is, just use the default one instead. > > > > Ok, it looks like having > > > > #define PORT_ESP32ACM (-1) > > > > in the driver source should be ok? I've tested that it works. > > Hah, I like that hack. But why not just use PORT_UNKNOWN? A lot of functionality doesn't work with PORT_UNKNOWN, e.g. console or modem control. I've got the idea of using -1 from this email: https://lore.kernel.org/linux-serial/502240f7-2cac-4fe6-9e27-f9861db3666d@app.fastmail.com/
On Fri, Oct 06, 2023 at 03:27:37AM -0700, Max Filippov wrote: > On Fri, Oct 6, 2023 at 2:34 AM Greg Kroah-Hartman > > > > Yes, but not all do. If you don't need to do anything special, it can > > > > just claim to be a normal device, we've had threads about this on the > > > > list before. If you don't need to determine in userspace from the tty > > > > connection what device it is, just use the default one instead. > > > > > > Ok, it looks like having > > > > > > #define PORT_ESP32ACM (-1) > > > > > > in the driver source should be ok? I've tested that it works. > > > > Hah, I like that hack. But why not just use PORT_UNKNOWN? > > A lot of functionality doesn't work with PORT_UNKNOWN, e.g. > console or modem control. > I've got the idea of using -1 from this email: > https://lore.kernel.org/linux-serial/502240f7-2cac-4fe6-9e27-f9861db3666d@app.fastmail.com/ Ok, we should encode this as a "real" number, "PORT_ANY" and set it to -1 and let all new devices use it. thanks, greg k-h
On Tue, Oct 3, 2023 at 2:47 PM Max Filippov <jcmvbkbc@gmail.com> wrote: > > On Tue, Oct 3, 2023 at 5:55 AM Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > > > On Thu, Sep 28, 2023 at 08:16:31AM -0700, Max Filippov wrote: > > > Add driver for the ACM controller of the Espressif ESP32S3 Soc. > > > > Odd extra space :( > > Ok. > > > > Hardware specification is available at the following URL: > > > > > > https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf > > > (Chapter 33 USB Serial/JTAG Controller) > > > > I don't understand this driver, "ACM" is a USB host <-> gadget protocol, > > why do you need a platform serial driver for this? > > The USB part of this piece of hardware is fixed and not controllable, so > all we have is a very limited UART interface. But to the outside world > it's a USB device with the CDC-ACM interface. > > > > diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c > > > new file mode 100644 > > > index 000000000000..f02abd2ac65e > > > --- /dev/null > > > +++ b/drivers/tty/serial/esp32_acm.c > > > @@ -0,0 +1,459 @@ > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > Why "or later"? I have to ask, sorry. > > I don't really have a preference here. Is there a reason to choose > GPL-2.0 only for a new code? Yes, that's the default license for the kernel. So you should have a reason for picking something else. Like maybe you copied all this from somewhere else and that was the license. Rob