diff mbox series

[v2,17/28] pinctrl: renesas: rzg2l: move ds and oi to SoC specific configuration

Message ID 20230929053915.1530607-18-claudiu.beznea@bp.renesas.com
State New
Headers show
Series [v2,01/28] dt-bindings: serial: renesas,scif: document r9a08g045 support | expand

Commit Message

Claudiu Sept. 29, 2023, 5:39 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Move drive strength and output impedance values to SoC specific
configuration data structure (struct rzg2l_hwcfg). This allows extending
the drive strength support for RZ/G3S. Along with this the DS values
were converted to uA for simple integration with RZ/G3S support.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---

Changes in v2:
- s/indexes/indices in code documentation
- s/micro amps/uA in code documentation
- added RZG2L_IOLH_MAX_DS_ENTRIES for "+ 4" statements in code
- changed struct rzg2l_hwcfg::iolh_groupb_oi[] size to 4 to avoid
  oversize it in next commits when RZG2L_IOLH_IDX_MAX will be increased
  and thus avoiding issues when executing
  "if (index == ARRAY_SIZE(hwcfg->iolh_groupb_oi))" in
  rzg2l_pinctrl_pinconf_set()
- collected tags

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 42 ++++++++++++++++++-------
 1 file changed, 31 insertions(+), 11 deletions(-)

Comments

Geert Uytterhoeven Oct. 4, 2023, 1:18 p.m. UTC | #1 
On Fri, Sep 29, 2023 at 7:39 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Move drive strength and output impedance values to SoC specific
> configuration data structure (struct rzg2l_hwcfg). This allows extending
> the drive strength support for RZ/G3S. Along with this the DS values
> were converted to uA for simple integration with RZ/G3S support.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>
> Changes in v2:
> - s/indexes/indices in code documentation
> - s/micro amps/uA in code documentation
> - added RZG2L_IOLH_MAX_DS_ENTRIES for "+ 4" statements in code
> - changed struct rzg2l_hwcfg::iolh_groupb_oi[] size to 4 to avoid
>   oversize it in next commits when RZG2L_IOLH_IDX_MAX will be increased
>   and thus avoiding issues when executing
>   "if (index == ARRAY_SIZE(hwcfg->iolh_groupb_oi))" in
>   rzg2l_pinctrl_pinconf_set()
> - collected tags

Thanks, will queue in renesas-pinctrl-for-v6.7.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 73d8a84af04a..2afc9a34ffa3 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -133,13 +133,30 @@  struct rzg2l_register_offsets {
 	u16 sd_ch;
 };
 
+/**
+ * enum rzg2l_iolh_index - starting indices in IOLH specific arrays
+ * @RZG2L_IOLH_IDX_3V3: starting index for 3V3 power source
+ * @RZG2L_IOLH_IDX_MAX: maximum index
+ */
+enum rzg2l_iolh_index {
+	RZG2L_IOLH_IDX_3V3 = 0,
+	RZG2L_IOLH_IDX_MAX = 4,
+};
+
+/* Maximum number of driver strength entries per power source. */
+#define RZG2L_IOLH_MAX_DS_ENTRIES	(4)
+
 /**
  * struct rzg2l_hwcfg - hardware configuration data structure
  * @regs: hardware specific register offsets
+ * @iolh_groupa_ua: IOLH group A uA specific values
+ * @iolh_groupb_oi: IOLH group B output impedance specific values
  * @func_base: base number for port function (see register PFC)
  */
 struct rzg2l_hwcfg {
 	const struct rzg2l_register_offsets regs;
+	u16 iolh_groupa_ua[RZG2L_IOLH_IDX_MAX];
+	u16 iolh_groupb_oi[4];
 	u8 func_base;
 };
 
@@ -177,9 +194,6 @@  struct rzg2l_pinctrl {
 	struct mutex			mutex; /* serialize adding groups and functions */
 };
 
-static const unsigned int iolh_groupa_mA[] = { 2, 4, 8, 12 };
-static const unsigned int iolh_groupb_oi[] = { 100, 66, 50, 33 };
-
 static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
 				       u8 pin, u8 off, u8 func)
 {
@@ -608,7 +622,7 @@  static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 			return -EINVAL;
 
 		index = rzg2l_read_pin_config(pctrl, IOLH(off), bit, IOLH_MASK);
-		arg = iolh_groupa_mA[index];
+		arg = hwcfg->iolh_groupa_ua[index + RZG2L_IOLH_IDX_3V3] / 1000;
 		break;
 	}
 
@@ -619,7 +633,7 @@  static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 			return -EINVAL;
 
 		index = rzg2l_read_pin_config(pctrl, IOLH(off), bit, IOLH_MASK);
-		arg = iolh_groupb_oi[index];
+		arg = hwcfg->iolh_groupb_oi[index];
 		break;
 	}
 
@@ -707,11 +721,12 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			if (!(cfg & PIN_CFG_IOLH_A))
 				return -EINVAL;
 
-			for (index = 0; index < ARRAY_SIZE(iolh_groupa_mA); index++) {
-				if (arg == iolh_groupa_mA[index])
+			for (index = RZG2L_IOLH_IDX_3V3;
+			     index < RZG2L_IOLH_IDX_3V3 + RZG2L_IOLH_MAX_DS_ENTRIES; index++) {
+				if (arg == (hwcfg->iolh_groupa_ua[index] / 1000))
 					break;
 			}
-			if (index >= ARRAY_SIZE(iolh_groupa_mA))
+			if (index == (RZG2L_IOLH_IDX_3V3 + RZG2L_IOLH_MAX_DS_ENTRIES))
 				return -EINVAL;
 
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
@@ -725,11 +740,11 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			if (!(cfg & PIN_CFG_IOLH_B))
 				return -EINVAL;
 
-			for (index = 0; index < ARRAY_SIZE(iolh_groupb_oi); index++) {
-				if (arg == iolh_groupb_oi[index])
+			for (index = 0; index < ARRAY_SIZE(hwcfg->iolh_groupb_oi); index++) {
+				if (arg == hwcfg->iolh_groupb_oi[index])
 					break;
 			}
-			if (index >= ARRAY_SIZE(iolh_groupb_oi))
+			if (index == ARRAY_SIZE(hwcfg->iolh_groupb_oi))
 				return -EINVAL;
 
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
@@ -1562,6 +1577,11 @@  static const struct rzg2l_hwcfg rzg2l_hwcfg = {
 		.pwpr = 0x3014,
 		.sd_ch = 0x3000,
 	},
+	.iolh_groupa_ua = {
+		/* 3v3 power source */
+		[RZG2L_IOLH_IDX_3V3] = 2000, 4000, 8000, 12000,
+	},
+	.iolh_groupb_oi = { 100, 66, 50, 33, },
 };
 
 static struct rzg2l_pinctrl_data r9a07g043_data = {