Message ID | cover.1695934946.git.mirq-linux@rere.qmqm.pl |
---|---|
Headers | show |
Series | usb: chipidea: An USB DMA fix + cleanups for Tegra | expand |
On Thu, Sep 28, 2023 at 11:06:03PM +0200, Michał Mirosław wrote: > Tegra USB controllers seem to issue DMA in full 32-bit words only and thus > may overwrite unevenly-sized buffers. One such occurrence is detected by > SLUB when receiving a reply to a 1-byte buffer (below). Fix this by > allocating a bounce buffer also for buffers with sizes not a multiple of 4. > > ============================================================================= > BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten > ----------------------------------------------------------------------------- > > 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc > Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 > __kmem_cache_alloc_node+0x12f/0x1e4 > __kmalloc+0x33/0x8c > usb_get_status+0x2b/0xac > hub_probe+0x5e9/0xcec > usb_probe_interface+0xbf/0x21c > really_probe+0xa5/0x2c4 > __driver_probe_device+0x75/0x174 > driver_probe_device+0x31/0x94 > __device_attach_driver+0x65/0xc0 > bus_for_each_drv+0x4b/0x74 > __device_attach+0x69/0x120 > bus_probe_device+0x65/0x6c > device_add+0x48b/0x5f8 > usb_set_configuration+0x37b/0x6b4 > usb_generic_driver_probe+0x37/0x68 > usb_probe_device+0x35/0xb4 > Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) > Object 0x8555cd00 @offset=3328 fp=0x00000000 > > Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ > Redzone 8555cd40: cc cc cc cc .... > Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ > CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 > Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) > Workqueue: usb_hub_wq hub_event > [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) > [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) > [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) > [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) > [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) > [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) > [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) > [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) > [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) > [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) > [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) > [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) > usb 1-1: device descriptor read/8, error -71 > > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > --- > drivers/usb/chipidea/host.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) Acked-by: Thierry Reding <treding@nvidia.com>
On 23-10-11 23:53:28, Thierry Reding wrote: > On Thu, Sep 28, 2023 at 11:06:03PM +0200, Michał Mirosław wrote: > > The USB host on Tegra3 works with 32-bit alignment. Previous code tried > > to align the buffer, but it did align the wrapper struct instead, so > > the buffer was at a constant offset of 8 bytes (two pointers) from > > expected alignment. Since kmalloc() guarantees at least 8-byte > > alignment already, the alignment-extending is removed. > > > > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > > --- > > drivers/usb/chipidea/host.c | 45 +++++++++++++++---------------------- > > 1 file changed, 18 insertions(+), 27 deletions(-) > > > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c > > index abddd39d1ff1..0cce19208370 100644 > > --- a/drivers/usb/chipidea/host.c > > +++ b/drivers/usb/chipidea/host.c > > @@ -30,8 +30,7 @@ struct ehci_ci_priv { > > }; > > > > struct ci_hdrc_dma_aligned_buffer { > > - void *kmalloc_ptr; > > - void *old_xfer_buffer; > > + void *original_buffer; > > u8 data[]; > > }; > > > > @@ -380,60 +379,52 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd) > > return 0; > > } > > > > -static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb) > > +static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb, bool copy_back) > > { > > struct ci_hdrc_dma_aligned_buffer *temp; > > - size_t length; > > > > if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) > > return; > > + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; > > This threw me off a bit until I realized it was already there > previously, just in a different place. Is there a particular reason why > this is moved? > > Regardless, this looks fine, so: > > Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Peter Chen <peter.chen@kernel.org>