| Message ID | 20231023-usb-dfu-boot-v1-0-df9d121c67c1@linaro.org |
|---|---|
| Headers | show |
| Series | ARM: meson: Add boot over DFU RAM as an USB boot step | expand |
Hi Neil, Thank you for the series. On lun., oct. 23, 2023 at 14:41, "Neil Armstrong" <neil.armstrong@linaro.org> wrote: > Add boot over DFU RAM as an alternate to running script at > a fixed address like done today. > > The main culprit is that it's not possible to do that > on G12A/SM1 platforms due to changes in the USB boot protocol. > > With this, U-Boot will present a DFU device with a ram slot where > the Host could write a fitImage or legacy U-Boot image, then with the > detach command boot will continue trying to boot the uploaded image. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> I did a simple boot to aosp/main test on vim3 and also used fastboot to flash the bootloader. Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3 > --- > Neil Armstrong (4): > ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs > configs: meson64: declare addr out of EXTRA_ENV_SETTINGS > configs: meson64: add alternate USB DFU boot target > ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget > > configs/ad401_defconfig | 2 ++ > configs/bananapi-cm4-cm4io_defconfig | 6 ++++ > configs/bananapi-m2-pro_defconfig | 6 ++++ > configs/bananapi-m2s_defconfig | 6 ++++ > configs/bananapi-m5_defconfig | 6 ++++ > configs/beelink-gsking-x_defconfig | 6 ++++ > configs/beelink-gt1-ultimate_defconfig | 6 ++++ > configs/beelink-gtking_defconfig | 6 ++++ > configs/beelink-gtkingpro_defconfig | 6 ++++ > configs/jethub_j100_defconfig | 6 ++++ > configs/jethub_j80_defconfig | 6 ++++ > configs/khadas-vim2_defconfig | 6 ++++ > configs/khadas-vim3_android_ab_defconfig | 4 +++ > configs/khadas-vim3_android_defconfig | 4 +++ > configs/khadas-vim3_defconfig | 6 ++++ > configs/khadas-vim3l_android_ab_defconfig | 4 +++ > configs/khadas-vim3l_android_defconfig | 4 +++ > configs/khadas-vim3l_defconfig | 6 ++++ > configs/khadas-vim_defconfig | 6 ++++ > configs/libretech-ac_defconfig | 6 ++++ > configs/libretech-cc_defconfig | 6 ++++ > configs/libretech-cc_v2_defconfig | 6 ++++ > configs/libretech-s905d-pc_defconfig | 6 ++++ > configs/libretech-s912-pc_defconfig | 6 ++++ > configs/nanopi-k2_defconfig | 4 +++ > configs/odroid-c2_defconfig | 4 +++ > configs/odroid-c4_defconfig | 6 ++++ > configs/odroid-go-ultra_defconfig | 6 ++++ > configs/odroid-hc4_defconfig | 6 ++++ > configs/odroid-n2_defconfig | 6 ++++ > configs/odroid-n2l_defconfig | 6 ++++ > configs/p200_defconfig | 4 +++ > configs/p201_defconfig | 4 +++ > configs/p212_defconfig | 4 +++ > configs/radxa-zero2_defconfig | 6 ++++ > configs/radxa-zero_defconfig | 6 ++++ > configs/s400_defconfig | 6 ++++ > configs/sei510_defconfig | 6 ++++ > configs/sei610_defconfig | 6 ++++ > configs/u200_defconfig | 6 ++++ > configs/videostrong-kii-pro_defconfig | 4 +++ > configs/wetek-core2_defconfig | 6 ++++ > configs/wetek-hub_defconfig | 4 +++ > configs/wetek-play2_defconfig | 4 +++ > include/configs/meson64.h | 49 ++++++++++++++++++++++++++----- > 45 files changed, 278 insertions(+), 7 deletions(-) > --- > base-commit: 9a0cf3993f71043ba08c315572c54622de42d447 > change-id: 20231023-usb-dfu-boot-f47849f9fb34 > > Best regards, > -- > Neil Armstrong <neil.armstrong@linaro.org> > > > > -=-=-=-=-=-=-=-=-=-=-=- > Groups.io Links: You receive all messages sent to this group. > View/Reply Online (#1789): https://groups.io/g/u-boot-amlogic/message/1789 > Mute This Topic: https://groups.io/mt/102134207/1991006 > Group Owner: u-boot-amlogic+owner@groups.io > Unsubscribe: https://groups.io/g/u-boot-amlogic/leave/9114030/1991006/1716920881/xyzzy [mkorpershoek@baylibre.com] > -=-=-=-=-=-=-=-=-=-=-=-
Hi, On Mon, 23 Oct 2023 14:41:33 +0200, Neil Armstrong wrote: > Add boot over DFU RAM as an alternate to running script at > a fixed address like done today. > > The main culprit is that it's not possible to do that > on G12A/SM1 platforms due to changes in the USB boot protocol. > > With this, U-Boot will present a DFU device with a ram slot where > the Host could write a fitImage or legacy U-Boot image, then with the > detach command boot will continue trying to boot the uploaded image. > > [...] Thanks, Applied to https://source.denx.de/u-boot/custodians/u-boot-amlogic (u-boot-amlogic) [1/4] ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/50ad9d01b6124b9730de957e1901d177094748f6 [2/4] configs: meson64: declare addr out of EXTRA_ENV_SETTINGS https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/72f63d85fefebed59921456bb29138fbd9f73bb7 [3/4] configs: meson64: add alternate USB DFU boot target https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/4aa027b3f8c1b018ab50570ccf337587cc6178f8 [4/4] ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/07057ad9be7d400d9d9f02f3c1507fe2d8071c19
Add boot over DFU RAM as an alternate to running script at a fixed address like done today. The main culprit is that it's not possible to do that on G12A/SM1 platforms due to changes in the USB boot protocol. With this, U-Boot will present a DFU device with a ram slot where the Host could write a fitImage or legacy U-Boot image, then with the detach command boot will continue trying to boot the uploaded image. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- Neil Armstrong (4): ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs configs: meson64: declare addr out of EXTRA_ENV_SETTINGS configs: meson64: add alternate USB DFU boot target ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget configs/ad401_defconfig | 2 ++ configs/bananapi-cm4-cm4io_defconfig | 6 ++++ configs/bananapi-m2-pro_defconfig | 6 ++++ configs/bananapi-m2s_defconfig | 6 ++++ configs/bananapi-m5_defconfig | 6 ++++ configs/beelink-gsking-x_defconfig | 6 ++++ configs/beelink-gt1-ultimate_defconfig | 6 ++++ configs/beelink-gtking_defconfig | 6 ++++ configs/beelink-gtkingpro_defconfig | 6 ++++ configs/jethub_j100_defconfig | 6 ++++ configs/jethub_j80_defconfig | 6 ++++ configs/khadas-vim2_defconfig | 6 ++++ configs/khadas-vim3_android_ab_defconfig | 4 +++ configs/khadas-vim3_android_defconfig | 4 +++ configs/khadas-vim3_defconfig | 6 ++++ configs/khadas-vim3l_android_ab_defconfig | 4 +++ configs/khadas-vim3l_android_defconfig | 4 +++ configs/khadas-vim3l_defconfig | 6 ++++ configs/khadas-vim_defconfig | 6 ++++ configs/libretech-ac_defconfig | 6 ++++ configs/libretech-cc_defconfig | 6 ++++ configs/libretech-cc_v2_defconfig | 6 ++++ configs/libretech-s905d-pc_defconfig | 6 ++++ configs/libretech-s912-pc_defconfig | 6 ++++ configs/nanopi-k2_defconfig | 4 +++ configs/odroid-c2_defconfig | 4 +++ configs/odroid-c4_defconfig | 6 ++++ configs/odroid-go-ultra_defconfig | 6 ++++ configs/odroid-hc4_defconfig | 6 ++++ configs/odroid-n2_defconfig | 6 ++++ configs/odroid-n2l_defconfig | 6 ++++ configs/p200_defconfig | 4 +++ configs/p201_defconfig | 4 +++ configs/p212_defconfig | 4 +++ configs/radxa-zero2_defconfig | 6 ++++ configs/radxa-zero_defconfig | 6 ++++ configs/s400_defconfig | 6 ++++ configs/sei510_defconfig | 6 ++++ configs/sei610_defconfig | 6 ++++ configs/u200_defconfig | 6 ++++ configs/videostrong-kii-pro_defconfig | 4 +++ configs/wetek-core2_defconfig | 6 ++++ configs/wetek-hub_defconfig | 4 +++ configs/wetek-play2_defconfig | 4 +++ include/configs/meson64.h | 49 ++++++++++++++++++++++++++----- 45 files changed, 278 insertions(+), 7 deletions(-) --- base-commit: 9a0cf3993f71043ba08c315572c54622de42d447 change-id: 20231023-usb-dfu-boot-f47849f9fb34 Best regards,