| Message ID | 20231026081514.3610343-3-Delphine_CC_Chiu@Wiwynn.com |
|---|---|
| State | New |
| Headers | show |
| Series | LTC4286 and LTC4287 driver support | expand |
Hi Delphine,
kernel test robot noticed the following build warnings:
[auto build test WARNING on groeck-staging/hwmon-next]
[also build test WARNING on linus/master v6.6-rc7 next-20231027]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Delphine-CC-Chiu/dt-bindings-hwmon-Add-lltc-ltc4286-driver-bindings/20231026-161739
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link: https://lore.kernel.org/r/20231026081514.3610343-3-Delphine_CC_Chiu%40Wiwynn.com
patch subject: [PATCH v2 2/2] hwmon: pmbus: Add ltc4286 driver
reproduce: (https://download.01.org/0day-ci/archive/20231028/202310281159.Y11xKbmu-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202310281159.Y11xKbmu-lkp@intel.com/
All warnings (new ones prefixed by >>):
>> Documentation/hwmon/ltc4286.rst: WARNING: document isn't included in any toctree
> -----Original Message----- > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck > Sent: Friday, October 27, 2023 12:28 AM > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > patrick@stwcx.xyz; Jean Delvare <jdelvare@suse.com>; Jonathan Corbet > <corbet@lwn.net> > Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>; > linux-i2c@vger.kernel.org; linux-hwmon@vger.kernel.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > linux-doc@vger.kernel.org > Subject: Re: [PATCH v2 2/2] hwmon: pmbus: Add ltc4286 driver > > Security Reminder: Please be aware that this email is sent by an external > sender. > > On 10/26/23 01:15, Delphine CC Chiu wrote: > > Add a driver to support ltc4286 chip > > > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> > > > > Changelog: > > v2 - Revise Linear Technologies LTC4286 to > > Analog Devices LTC4286 in Kconfig > > - Add more description for this driver in Kconfig > > - Add some comments for MBR setting in ltc4286.c > > - Add ltc4286.rst > > --- > > Documentation/hwmon/ltc4286.rst | 79 ++++++++++++++++ > > drivers/hwmon/pmbus/Kconfig | 9 ++ > > drivers/hwmon/pmbus/Makefile | 1 + > > drivers/hwmon/pmbus/ltc4286.c | 160 > ++++++++++++++++++++++++++++++++ > > 4 files changed, 249 insertions(+) > > create mode 100644 Documentation/hwmon/ltc4286.rst > > create mode 100644 drivers/hwmon/pmbus/ltc4286.c > > > > diff --git a/Documentation/hwmon/ltc4286.rst > > b/Documentation/hwmon/ltc4286.rst new file mode 100644 index > > 000000000000..9cae50b7478d > > --- /dev/null > > +++ b/Documentation/hwmon/ltc4286.rst > > @@ -0,0 +1,79 @@ > > +.. SPDX-License-Identifier: GPL-2.0-or-later > > + > > +Kernel driver ltc4286 > > +===================== > > + > > +Supported chips: > > + > > + * Analog Devices LTC4286 > > + > > + Prefix: 'ltc4286' > > + > > + Addresses scanned: - > > + > > + Datasheet: > > + https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > + > w.analog.com%2Fmedia%2Fen%2Ftechnical-documentation%2Fdata-sheets%2 > F > > + > ltc4286.pdf&data=05%7C01%7CWayne_SC_Liu%40wiwynn.com%7Cb749e252b > fb84 > > + > 24531ac08dbd640774e%7Cda6e0628fc834caf9dd273061cbab167%7C0%7C0% > 7C638 > > + > 339344747629221%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoi > > + > V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=7s > HwFye > > + so39ED13H3KaxosVOMJT1Kswhwj38arystWQ%3D&reserved=0 > > + > > + * Analog Devices LTC4287 > > + > > + Prefix: 'ltc4287' > > + > > + Addresses scanned: - > > + > > + Datasheet: > > + https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > > + > w.analog.com%2Fmedia%2Fen%2Ftechnical-documentation%2Fdata-sheets%2 > F > > + > ltc4287.pdf&data=05%7C01%7CWayne_SC_Liu%40wiwynn.com%7Cb749e252b > fb84 > > + > 24531ac08dbd640774e%7Cda6e0628fc834caf9dd273061cbab167%7C0%7C0% > 7C638 > > + > 339344747629221%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoi > > + > V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=31 > 402MZ > > + 9ONvkV8BsRRPxmTZNMU1yj1u%2F3NFVEpThFPI%3D&reserved=0 > > + > > +Author: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> > > + > > + > > +Description > > +----------- > > + > > +This driver supports hardware monitoring for Analog Devices LTC4286 > > +and LTC4287 Hot-Swap Controller and Digital Power Monitors. > > + > > +LTC4286 and LTC4287 are hot-swap controllers that allow a circuit > > +board to be removed from or inserted into a live backplane. They also > > +feature current and voltage readback via an integrated 12 bit > > +analog-to-digital converter (ADC), accessed using a PMBus interface. > > + > > +The driver is a client driver to the core PMBus driver. Please see > > +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. > > + > > + > > +Usage Notes > > +----------- > > + > > +This driver does not auto-detect devices. You will have to > > +instantiate the devices explicitly. Please see > > +Documentation/i2c/instantiating-devices.rst for details. > > + > > +The shunt value in micro-ohms can be set via device tree at > > +compile-time. Please refer to the > > +Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml for bindings > if the device tree is used. > > + > > + > > +Platform data support > > +--------------------- > > + > > +The driver supports standard PMBus driver platform data. Please see > > +Documentation/hwmon/pmbus.rst for details. > > + > > + > > +Sysfs entries > > +------------- > > + > > +The following attributes are supported. Limits are read-write, > > +history reset attributes are write-only, all other attributes are read-only. > > + > > +======================= > ======================================================= > > +inX_label "vin1" or "vout1" depending on chip variant and > > + configuration. > > Is that a cut-and-paste ? I don't see it handled in the driver, and I don't > immediately see it in the datasheet. From the datasheet, it seems to me that > both are always present. We will revise to the correct description > > > +inX_input Measured voltage. > > + > > +curr1_label "iout1" > > +curr1_input Measured current. > > + > > +power1_label "pin1" > > +power1_input Input power. > > + > > +temp1_input Chip temperature. > > +======================= > > +======================================================= > > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > > index b4e93bd5835e..f2b53e8abc3c 100644 > > --- a/drivers/hwmon/pmbus/Kconfig > > +++ b/drivers/hwmon/pmbus/Kconfig > > @@ -226,6 +226,15 @@ config SENSORS_LTC3815 > > > > This driver can also be built as a module. If so, the module will > > be called ltc3815. > > +config SENSORS_LTC4286 > > + bool "Analog Devices LTC4286" > > + help > > + LTC4286 is an integrated solution for hot swap applications that > > + allows a board to be safely inserted and removed from a live > > + backplane. > > + This chip could be used to monitor voltage, current, ...etc. > > + If you say yes here you get hardware monitoring support for Analog > > + Devices LTC4286. > > > > config SENSORS_MAX15301 > > tristate "Maxim MAX15301" > > diff --git a/drivers/hwmon/pmbus/Makefile > > b/drivers/hwmon/pmbus/Makefile index 84ee960a6c2d..94e28f6d6a61 > 100644 > > --- a/drivers/hwmon/pmbus/Makefile > > +++ b/drivers/hwmon/pmbus/Makefile > > @@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_LM25066) += > lm25066.o > > obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o > > obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o > > obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o > > +obj-$(CONFIG_SENSORS_LTC4286) += ltc4286.o > > obj-$(CONFIG_SENSORS_MAX15301) += max15301.o > > obj-$(CONFIG_SENSORS_MAX16064) += max16064.o > > obj-$(CONFIG_SENSORS_MAX16601) += max16601.o > > diff --git a/drivers/hwmon/pmbus/ltc4286.c > > b/drivers/hwmon/pmbus/ltc4286.c new file mode 100644 index > > 000000000000..e1d72fe9587c > > --- /dev/null > > +++ b/drivers/hwmon/pmbus/ltc4286.c > > @@ -0,0 +1,160 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > + > > +#include <linux/err.h> > > +#include <linux/i2c.h> > > +#include <linux/init.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/pmbus.h> > > +#include "pmbus.h" > > + > > +/* LTC4286 register */ > > +#define LTC4286_MFR_CONFIG1 0xF2 > > + > > +/* LTC4286 configuration */ > > +#define VRANGE_SELECT_BIT BIT(1) > > + > > +#define LTC4286_MFR_ID_SIZE 3 > > + > > +enum chips { ltc4286, ltc4287 }; > > + > > +/* > > + * Initialize the MBR as default settings which is referred to > > +LTC4286 datasheet > > + * (March 22, 2022 version) table 3 page 16 */ static struct > > +pmbus_driver_info ltc4286_info = { > > + .pages = 1, > > + .format[PSC_VOLTAGE_IN] = direct, > > + .format[PSC_VOLTAGE_OUT] = direct, > > + .format[PSC_CURRENT_OUT] = direct, > > + .format[PSC_POWER] = direct, > > + .format[PSC_TEMPERATURE] = direct, > > + .m[PSC_VOLTAGE_IN] = 32, > > + .b[PSC_VOLTAGE_IN] = 0, > > + .R[PSC_VOLTAGE_IN] = 1, > > + .m[PSC_VOLTAGE_OUT] = 32, > > + .b[PSC_VOLTAGE_OUT] = 0, > > + .R[PSC_VOLTAGE_OUT] = 1, > > + .m[PSC_CURRENT_OUT] = 1024, > > + .b[PSC_CURRENT_OUT] = 0, > > + /* > > + * The rsense value used in MBR formula in LTC4286 datasheet > should be ohm unit. > > + * However, the rsense value that user input is mirco ohm. > > + * Thus, the MBR setting which involves rsense should be shifted by 6 > digits. > > + */ > > + .R[PSC_CURRENT_OUT] = 3 - 6, > > + .m[PSC_POWER] = 1, > > + .b[PSC_POWER] = 0, > > + /* > > + * The rsense value used in MBR formula in LTC4286 datasheet > should be ohm unit. > > + * However, the rsense value that user input is mirco ohm. > > + * Thus, the MBR setting which involves rsense should be shifted by 6 > digits. > > + */ > > + .R[PSC_POWER] = 4 - 6, > > + .m[PSC_TEMPERATURE] = 1, > > + .b[PSC_TEMPERATURE] = 273, > > + .R[PSC_TEMPERATURE] = 0, > > + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | > PMBUS_HAVE_IOUT | > > + PMBUS_HAVE_PIN | PMBUS_HAVE_TEMP | > PMBUS_HAVE_STATUS_VOUT | > > + PMBUS_HAVE_STATUS_IOUT | > PMBUS_HAVE_STATUS_TEMP, }; > > + > > The datasheet for LTC4286 (in the PMBus description talks about LSB 21.3 > mV/RSENSE > for IOUT_OC_WARN_LIMIT and 2.8/RSENSE for PIN_OP_WARN_LIMIT. This > contradicts > data elsewhere in the datasheet which uses above coefficients for both > LTC4286 > and LTC4287. I don't know if the datasheet is wrong, but this needs to be > clarified. > If the datasheet is wrong, that needs to be mentioned above. If the limit > registers > use different coefficients, local code will be needed to adjust values when > reading / > writing the registers to have it match coefficients. We have sent an e-mail about this question. > > > +static const struct i2c_device_id ltc4286_id[] = { { "ltc4286", ltc4286 }, > > + { "ltc4287", > ltc4287 }, > > + {} }; > > +MODULE_DEVICE_TABLE(i2c, ltc4286_id); > > + > > +static int ltc4286_probe(struct i2c_client *client) > > +{ > > + int ret; > > + const struct i2c_device_id *mid; > > + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; > > + struct pmbus_driver_info *info; > > + u32 rsense; > > + > > + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, > block_buffer); > > + if (ret < 0) { > > + dev_err(&client->dev, "failed to read manufacturer id\n"); > > Why not use dev_err_probe() here ? We will use dev_err_probe() instead of dev_err() > > > + return ret; > > + } > > + > > + /* > > + * Refer to ltc4286 datasheet page 20 > > + * the manufacturer id is LTC > > + */ > > + if (ret != LTC4286_MFR_ID_SIZE || > > + strncmp(block_buffer, "LTC", LTC4286_MFR_ID_SIZE)) { > > + return dev_err_probe(&client->dev, ret, > > + "failed to read manufacturer > id\n"); > > This is misleading. It didn't _fail_ to read the manufacturer ID. We will revise to "Manufacturer id mismatch" > > > + } > > + > > + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, > block_buffer); > > + if (ret < 0) { > > + dev_err(&client->dev, "failed to read manufacturer > model\n"); > > Why not use dev_err_probe() here ? We will use dev_err_probe() instead of dev_err() > > > + return ret; > > + } > > + > > + for (mid = ltc4286_id; mid->name[0]; mid++) { > > + if (!strncasecmp(mid->name, block_buffer, > strlen(mid->name))) > > + break; > > + } > > This is pointless code. If the ID is not found, mid will point after > the end of the array, and then what ? > > The purpose of such code is to validate if the chip is actually the one > referenced in the match function and at least warn if that is not the case. > It should never accept a chip which is _known_ to not be supported. We will revise as below for (mid = ltc4286_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } if (!mid->name[0]) return dev_err_probe(&client->dev, -ENODEV, "Unsupported device\n"); > > > + > > + ret = of_property_read_u32(client->dev.of_node, > > + "shunt-resistor-micro-ohms", > &rsense); > > + if (ret < 0) > > + return ret; > > + > > + if (rsense == 0) > > + return -EINVAL; > > + > > + info = <c4286_info; > > + > > + /* Default of VRANGE_SELECT = 1, 102.4V */ > > + if (device_property_read_bool(&client->dev, > "adi,vrange-select-25p6")) { > > What if the adi,vrange-select-25p6 property is not provided, but the chip > is programmed for this range ? The binding document tells programmers how to fill the dts. Thus, programmers must fill this property if their system is 25.6 volts voltage range. > > > + /* Setup MFR1 CONFIG register bit 1 VRANGE_SELECT */ > > + ret = i2c_smbus_read_word_data(client, > LTC4286_MFR_CONFIG1); > > + if (ret < 0) { > > + dev_err(&client->dev, > > + "failed to read manufacturer > configuration one\n"); > + return ret; > > + } > > + > > + ret &= ~VRANGE_SELECT_BIT; /* VRANGE_SELECT = 0, > 25.6V */ > > + ret = i2c_smbus_write_word_data(client, > LTC4286_MFR_CONFIG1, > > + ret); > > This should only be written if it actually changed. We will revise as below if ((ret & VRANGE_SELECT_BIT) != VRANGE_25P6) { ret &= ~VRANGE_SELECT_BIT; /* VRANGE_SELECT = 0, 25.6V */ ret = i2c_smbus_write_word_data( client, LTC4286_MFR_CONFIG1, ret); if (ret < 0) return dev_err_probe(&client->dev, ret, "Failed to set vrange\n"); } Moreover, we will check the behavior about this register with vendor. > > > + if (ret < 0) { > > + dev_err(&client->dev, "failed to set vrange\n"); > > + return ret; > > + } > > + > > + info->m[PSC_VOLTAGE_IN] = 128; > > + info->m[PSC_VOLTAGE_OUT] = 128; > > + info->m[PSC_POWER] = 4 * rsense; > > You can not overwrite ltc4286_info because there might be several chips > in the system with different sense resistor values and range > configurations. We will add below to replace the line info = <c4286_info; info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; memcpy(info, <c4286_info, sizeof(*info)); > > Also, the above (and the calculation in the code below) will overflow > with too-large sense register values. We will add below to check if the 4*rsense overflow or not. if (info->m[PSC_POWER] > INT_MAX) return dev_err_probe(&client->dev, -ERANGE, "Power coefficient overflow\n"); > > > + } else > > + info->m[PSC_POWER] = rsense; > > Please run checkpatch --strict on your patches. We will run checkpatch --strict to check our patch. > > > + > > + info->m[PSC_CURRENT_OUT] = 1024 * rsense; > > Any rsense value larger than MAXINT / 1024 will overflow. if (info->m[PSC_CURRENT_OUT] > INT_MAX) return dev_err_probe(&client->dev, -ERANGE, "Current coefficient overflow\n"); > > > + > > + return pmbus_do_probe(client, info); > > +} > > + > > +static const struct of_device_id ltc4286_of_match[] = { > > + { .compatible = "lltc,ltc4286" }, > > + { .compatible = "lltc,ltc4287" }, > > + {} > > +}; > > + > > +static struct i2c_driver ltc4286_driver = { > > + .driver = { > > + .name = "ltc4286", > > + .of_match_table = ltc4286_of_match, > > + }, > > + .probe = ltc4286_probe, > > + .id_table = ltc4286_id, > > +}; > > + > > +module_i2c_driver(ltc4286_driver); > > + > > +MODULE_AUTHOR("Delphine CC Chiu > <Delphine_CC_Chiu@wiwynn.com>"); > > +MODULE_DESCRIPTION("PMBUS driver for LTC4286 and compatibles"); > > +MODULE_LICENSE("GPL");
> -----Original Message----- > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck > Sent: Tuesday, October 31, 2023 9:47 PM > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > patrick@stwcx.xyz; Jean Delvare <jdelvare@suse.com>; Jonathan Corbet > <corbet@lwn.net> > Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>; > linux-i2c@vger.kernel.org; linux-hwmon@vger.kernel.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > linux-doc@vger.kernel.org > Subject: Re: [PATCH v2 2/2] hwmon: pmbus: Add ltc4286 driver > > Security Reminder: Please be aware that this email is sent by an external > sender. > > On 10/30/23 23:46, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: > [ ... ] > >> > >>> + > >>> + ret = of_property_read_u32(client->dev.of_node, > >>> + "shunt-resistor-micro-ohms", > >> &rsense); > >>> + if (ret < 0) > >>> + return ret; > >>> + > >>> + if (rsense == 0) > >>> + return -EINVAL; > >>> + > >>> + info = <c4286_info; > >>> + > >>> + /* Default of VRANGE_SELECT = 1, 102.4V */ > >>> + if (device_property_read_bool(&client->dev, > >> "adi,vrange-select-25p6")) { > >> > >> What if the adi,vrange-select-25p6 property is not provided, but the > >> chip is programmed for this range ? > > The binding document tells programmers how to fill the dts. > > Thus, programmers must fill this property if their system is 25.6 volts voltage > range. > > > > Sure, but there is no else case, meaning VRANGE_SELECT is unmodified in that > case. There is no guarantee that the chip is in its power-on state. The else case is in v2 ltc4286.c line 133 It means that the voltage range for programmer is 102.4 volts which is default value, so driver doesn't need to do any change for VRANGE_SELECT bit. Additionally, we have checked the behavior of VRANGE_SELECT bit with vendor. Below is the reply from vendor: [Our question] If we change the VRANGE_SELECT bit value to 0, the value would return to default after we restart this device? Or VRANGE_SELECT bit value would never change util someone change its value? [ADI reply] chip reset will go back to default. Thanks. Thus, we must overwrite this bit if the user fill adi,vrange-select-25p6 here whenever driver probes > > Guenter
On 11/6/23 19:08, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: >> -----Original Message----- >> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck >> Sent: Tuesday, October 31, 2023 9:47 PM >> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; >> patrick@stwcx.xyz; Jean Delvare <jdelvare@suse.com>; Jonathan Corbet >> <corbet@lwn.net> >> Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski >> <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>; >> linux-i2c@vger.kernel.org; linux-hwmon@vger.kernel.org; >> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; >> linux-doc@vger.kernel.org >> Subject: Re: [PATCH v2 2/2] hwmon: pmbus: Add ltc4286 driver >> >> Security Reminder: Please be aware that this email is sent by an external >> sender. >> >> On 10/30/23 23:46, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: >> [ ... ] >>>> >>>>> + >>>>> + ret = of_property_read_u32(client->dev.of_node, >>>>> + "shunt-resistor-micro-ohms", >>>> &rsense); >>>>> + if (ret < 0) >>>>> + return ret; >>>>> + >>>>> + if (rsense == 0) >>>>> + return -EINVAL; >>>>> + >>>>> + info = <c4286_info; >>>>> + >>>>> + /* Default of VRANGE_SELECT = 1, 102.4V */ >>>>> + if (device_property_read_bool(&client->dev, >>>> "adi,vrange-select-25p6")) { >>>> >>>> What if the adi,vrange-select-25p6 property is not provided, but the >>>> chip is programmed for this range ? >>> The binding document tells programmers how to fill the dts. >>> Thus, programmers must fill this property if their system is 25.6 volts voltage >> range. >>> >> >> Sure, but there is no else case, meaning VRANGE_SELECT is unmodified in that >> case. There is no guarantee that the chip is in its power-on state. > > The else case is in v2 ltc4286.c line 133 > It means that the voltage range for programmer is 102.4 volts which is default value, > so driver doesn't need to do any change for VRANGE_SELECT bit. There is no guarantee that the value wasn't changed before the driver was loaded. Guenter > Additionally, we have checked the behavior of VRANGE_SELECT bit with vendor. > Below is the reply from vendor: > [Our question] > If we change the VRANGE_SELECT bit value to 0, the value would return to default after we restart this device? > Or VRANGE_SELECT bit value would never change util someone change its value? > [ADI reply] > chip reset will go back to default. Thanks. > > Thus, we must overwrite this bit if the user fill adi,vrange-select-25p6 here whenever driver probes > >> >> Guenter >
On Wed, Nov 15, 2023 at 08:42:22AM +0000, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: > > -----Original Message----- > > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck > > Sent: Tuesday, November 7, 2023 11:30 AM > > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > > patrick@stwcx.xyz; Jean Delvare <jdelvare@suse.com>; Jonathan Corbet > > <corbet@lwn.net> > > Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > > <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley <conor+dt@kernel.org>; > > linux-i2c@vger.kernel.org; linux-hwmon@vger.kernel.org; > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > > linux-doc@vger.kernel.org > > Subject: Re: [PATCH v2 2/2] hwmon: pmbus: Add ltc4286 driver > > > > Security Reminder: Please be aware that this email is sent by an external > > sender. > > > > On 11/6/23 19:08, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: > > >> -----Original Message----- > > >> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck > > >> Sent: Tuesday, October 31, 2023 9:47 PM > > >> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > > >> patrick@stwcx.xyz; Jean Delvare <jdelvare@suse.com>; Jonathan Corbet > > >> <corbet@lwn.net> > > >> Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski > > >> <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley > > >> <conor+dt@kernel.org>; linux-i2c@vger.kernel.org; > > >> linux-hwmon@vger.kernel.org; devicetree@vger.kernel.org; > > >> linux-kernel@vger.kernel.org; linux-doc@vger.kernel.org > > >> Subject: Re: [PATCH v2 2/2] hwmon: pmbus: Add ltc4286 driver > > >> > > >> Security Reminder: Please be aware that this email is sent by an > > >> external sender. > > >> > > >> On 10/30/23 23:46, Delphine_CC_Chiu/WYHQ/Wiwynn wrote: > > >> [ ... ] > > >>>> > > >>>>> + > > >>>>> + ret = of_property_read_u32(client->dev.of_node, > > >>>>> + "shunt-resistor-micro-ohms", > > >>>> &rsense); > > >>>>> + if (ret < 0) > > >>>>> + return ret; > > >>>>> + > > >>>>> + if (rsense == 0) > > >>>>> + return -EINVAL; > > >>>>> + > > >>>>> + info = <c4286_info; > > >>>>> + > > >>>>> + /* Default of VRANGE_SELECT = 1, 102.4V */ > > >>>>> + if (device_property_read_bool(&client->dev, > > >>>> "adi,vrange-select-25p6")) { > > >>>> > > >>>> What if the adi,vrange-select-25p6 property is not provided, but > > >>>> the chip is programmed for this range ? > > >>> The binding document tells programmers how to fill the dts. > > >>> Thus, programmers must fill this property if their system is 25.6 > > >>> volts voltage > > >> range. > > >>> > > >> > > >> Sure, but there is no else case, meaning VRANGE_SELECT is unmodified > > >> in that case. There is no guarantee that the chip is in its power-on state. > > > > > > The else case is in v2 ltc4286.c line 133 It means that the voltage > > > range for programmer is 102.4 volts which is default value, so driver > > > doesn't need to do any change for VRANGE_SELECT bit. > > > > There is no guarantee that the value wasn't changed before the driver was > > loaded. > > We still can’t get your point. > Could you tell us about your concern here? I have repeated it several times. You are making assumptions about register values when the driver is loaded. Those asumptions are wrong since the state of the chip is unknown when the driver is loaded. Any entty (BIOS, ROMMON, i2cset, some operating system loaded earlier, or even some other driver or platform code) may have changed those values. On top of that, as I also have pointed out, LTC4287 supports saving its configuration data in eeprom. That means that any chip configuration set during production or anytime later will be retained, meaning any assumption about chip configuration when the driver is loaded is even more wrong. Guenter
diff --git a/Documentation/hwmon/ltc4286.rst b/Documentation/hwmon/ltc4286.rst new file mode 100644 index 000000000000..9cae50b7478d --- /dev/null +++ b/Documentation/hwmon/ltc4286.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver ltc4286 +===================== + +Supported chips: + + * Analog Devices LTC4286 + + Prefix: 'ltc4286' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4286.pdf + + * Analog Devices LTC4287 + + Prefix: 'ltc4287' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4287.pdf + +Author: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices LTC4286 +and LTC4287 Hot-Swap Controller and Digital Power Monitors. + +LTC4286 and LTC4287 are hot-swap controllers that allow a circuit board +to be removed from or inserted into a live backplane. They also feature +current and voltage readback via an integrated 12 bit analog-to-digital +converter (ADC), accessed using a PMBus interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + +The shunt value in micro-ohms can be set via device tree at compile-time. Please +refer to the Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml for bindings +if the device tree is used. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. Please see +Documentation/hwmon/pmbus.rst for details. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write, history reset +attributes are write-only, all other attributes are read-only. + +======================= ======================================================= +inX_label "vin1" or "vout1" depending on chip variant and + configuration. +inX_input Measured voltage. + +curr1_label "iout1" +curr1_input Measured current. + +power1_label "pin1" +power1_input Input power. + +temp1_input Chip temperature. +======================= ======================================================= diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index b4e93bd5835e..f2b53e8abc3c 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -226,6 +226,15 @@ config SENSORS_LTC3815 This driver can also be built as a module. If so, the module will be called ltc3815. +config SENSORS_LTC4286 + bool "Analog Devices LTC4286" + help + LTC4286 is an integrated solution for hot swap applications that + allows a board to be safely inserted and removed from a live + backplane. + This chip could be used to monitor voltage, current, ...etc. + If you say yes here you get hardware monitoring support for Analog + Devices LTC4286. config SENSORS_MAX15301 tristate "Maxim MAX15301" diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 84ee960a6c2d..94e28f6d6a61 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o +obj-$(CONFIG_SENSORS_LTC4286) += ltc4286.o obj-$(CONFIG_SENSORS_MAX15301) += max15301.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX16601) += max16601.o diff --git a/drivers/hwmon/pmbus/ltc4286.c b/drivers/hwmon/pmbus/ltc4286.c new file mode 100644 index 000000000000..e1d72fe9587c --- /dev/null +++ b/drivers/hwmon/pmbus/ltc4286.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pmbus.h> +#include "pmbus.h" + +/* LTC4286 register */ +#define LTC4286_MFR_CONFIG1 0xF2 + +/* LTC4286 configuration */ +#define VRANGE_SELECT_BIT BIT(1) + +#define LTC4286_MFR_ID_SIZE 3 + +enum chips { ltc4286, ltc4287 }; + +/* + * Initialize the MBR as default settings which is referred to LTC4286 datasheet + * (March 22, 2022 version) table 3 page 16 + */ +static struct pmbus_driver_info ltc4286_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_POWER] = direct, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_VOLTAGE_IN] = 32, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 1, + .m[PSC_VOLTAGE_OUT] = 32, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 1, + .m[PSC_CURRENT_OUT] = 1024, + .b[PSC_CURRENT_OUT] = 0, + /* + * The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit. + * However, the rsense value that user input is mirco ohm. + * Thus, the MBR setting which involves rsense should be shifted by 6 digits. + */ + .R[PSC_CURRENT_OUT] = 3 - 6, + .m[PSC_POWER] = 1, + .b[PSC_POWER] = 0, + /* + * The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit. + * However, the rsense value that user input is mirco ohm. + * Thus, the MBR setting which involves rsense should be shifted by 6 digits. + */ + .R[PSC_POWER] = 4 - 6, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 273, + .R[PSC_TEMPERATURE] = 0, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_TEMP, +}; + +static const struct i2c_device_id ltc4286_id[] = { { "ltc4286", ltc4286 }, + { "ltc4287", ltc4287 }, + {} }; +MODULE_DEVICE_TABLE(i2c, ltc4286_id); + +static int ltc4286_probe(struct i2c_client *client) +{ + int ret; + const struct i2c_device_id *mid; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; + struct pmbus_driver_info *info; + u32 rsense; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "failed to read manufacturer id\n"); + return ret; + } + + /* + * Refer to ltc4286 datasheet page 20 + * the manufacturer id is LTC + */ + if (ret != LTC4286_MFR_ID_SIZE || + strncmp(block_buffer, "LTC", LTC4286_MFR_ID_SIZE)) { + return dev_err_probe(&client->dev, ret, + "failed to read manufacturer id\n"); + } + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "failed to read manufacturer model\n"); + return ret; + } + + for (mid = ltc4286_id; mid->name[0]; mid++) { + if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) + break; + } + + ret = of_property_read_u32(client->dev.of_node, + "shunt-resistor-micro-ohms", &rsense); + if (ret < 0) + return ret; + + if (rsense == 0) + return -EINVAL; + + info = <c4286_info; + + /* Default of VRANGE_SELECT = 1, 102.4V */ + if (device_property_read_bool(&client->dev, "adi,vrange-select-25p6")) { + /* Setup MFR1 CONFIG register bit 1 VRANGE_SELECT */ + ret = i2c_smbus_read_word_data(client, LTC4286_MFR_CONFIG1); + if (ret < 0) { + dev_err(&client->dev, + "failed to read manufacturer configuration one\n"); + return ret; + } + + ret &= ~VRANGE_SELECT_BIT; /* VRANGE_SELECT = 0, 25.6V */ + ret = i2c_smbus_write_word_data(client, LTC4286_MFR_CONFIG1, + ret); + if (ret < 0) { + dev_err(&client->dev, "failed to set vrange\n"); + return ret; + } + + info->m[PSC_VOLTAGE_IN] = 128; + info->m[PSC_VOLTAGE_OUT] = 128; + info->m[PSC_POWER] = 4 * rsense; + } else + info->m[PSC_POWER] = rsense; + + info->m[PSC_CURRENT_OUT] = 1024 * rsense; + + return pmbus_do_probe(client, info); +} + +static const struct of_device_id ltc4286_of_match[] = { + { .compatible = "lltc,ltc4286" }, + { .compatible = "lltc,ltc4287" }, + {} +}; + +static struct i2c_driver ltc4286_driver = { + .driver = { + .name = "ltc4286", + .of_match_table = ltc4286_of_match, + }, + .probe = ltc4286_probe, + .id_table = ltc4286_id, +}; + +module_i2c_driver(ltc4286_driver); + +MODULE_AUTHOR("Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>"); +MODULE_DESCRIPTION("PMBUS driver for LTC4286 and compatibles"); +MODULE_LICENSE("GPL");
Add a driver to support ltc4286 chip Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Changelog: v2 - Revise Linear Technologies LTC4286 to Analog Devices LTC4286 in Kconfig - Add more description for this driver in Kconfig - Add some comments for MBR setting in ltc4286.c - Add ltc4286.rst --- Documentation/hwmon/ltc4286.rst | 79 ++++++++++++++++ drivers/hwmon/pmbus/Kconfig | 9 ++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/ltc4286.c | 160 ++++++++++++++++++++++++++++++++ 4 files changed, 249 insertions(+) create mode 100644 Documentation/hwmon/ltc4286.rst create mode 100644 drivers/hwmon/pmbus/ltc4286.c