| Message ID | 20231120212037.911774-10-peter.griffin@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board | expand |
On Mon, 20 Nov 2023 21:20:27 +0000, Peter Griffin wrote: > Specifying samsung,uart-fifosize in both DT and driver static data is error > prone and relies on driver probe order and dt aliases to be correct. > > Additionally on many Exynos platforms these are (USI) universal serial > interfaces which can be uart, spi or i2c, so it can change per board. > > For google,gs101-uart and exynosautov9-uart make samsung,uart-fifosize a > required property. For these platforms fifosize now *only* comes from DT. > > It is hoped other Exynos platforms will also switch over time. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > .../bindings/serial/samsung_uart.yaml | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/serial/samsung_uart.yaml:141:8: [warning] wrong indentation: expected 8 but found 7 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231120212037.911774-10-peter.griffin@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Mon, Nov 20, 2023 at 09:20:27PM +0000, Peter Griffin wrote: > Specifying samsung,uart-fifosize in both DT and driver static data is error > prone and relies on driver probe order and dt aliases to be correct. > > Additionally on many Exynos platforms these are (USI) universal serial > interfaces which can be uart, spi or i2c, so it can change per board. > > For google,gs101-uart and exynosautov9-uart make samsung,uart-fifosize a > required property. For these platforms fifosize now *only* comes from DT. > > It is hoped other Exynos platforms will also switch over time. Then allow the property on them. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > .../bindings/serial/samsung_uart.yaml | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > index ccc3626779d9..22a1edadc4fe 100644 > --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > @@ -133,6 +133,23 @@ allOf: > - const: uart > - const: clk_uart_baud0 > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - google,gs101-uart > + - samsung,exynosautov9-uart > + then: > + properties: > + samsung,uart-fifosize: > + description: The fifo size supported by the UART channel. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [16, 64, 256] We already have 'fifo-size' in several drivers. Use that. Please move its type/description definitions to serial.yaml and make drivers just do 'fifo-size: true' if they use it. > + > + required: > + - samsung,uart-fifosize A new required property is an ABI break. Please explain why that is okay in the commit message. Rob
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index ccc3626779d9..22a1edadc4fe 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -133,6 +133,23 @@ allOf: - const: uart - const: clk_uart_baud0 + - if: + properties: + compatible: + contains: + enum: + - google,gs101-uart + - samsung,exynosautov9-uart + then: + properties: + samsung,uart-fifosize: + description: The fifo size supported by the UART channel. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [16, 64, 256] + + required: + - samsung,uart-fifosize + unevaluatedProperties: false examples:
Specifying samsung,uart-fifosize in both DT and driver static data is error prone and relies on driver probe order and dt aliases to be correct. Additionally on many Exynos platforms these are (USI) universal serial interfaces which can be uart, spi or i2c, so it can change per board. For google,gs101-uart and exynosautov9-uart make samsung,uart-fifosize a required property. For these platforms fifosize now *only* comes from DT. It is hoped other Exynos platforms will also switch over time. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- .../bindings/serial/samsung_uart.yaml | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)