| Message ID | 20231210134717.94020-9-biju.das.jz@bp.renesas.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Convert DA906{1,2} bindings to json-schema | expand |
On Sun, Dec 10, 2023 at 01:47:17PM +0000, Biju Das wrote: > Convert the da9062 PMIC device tree binding documentation to json-schema. > > Document the missing gpio child node for da9062. > > While at it, update description with link to product information and > example. > > The missing child node with of_compatible defined in MFD_CELL_OF is > causing the below warning message: > da9062-gpio: Failed to locate of_node [id: -1] > > So, make all child nodes with of_compatible defined in struct mfd_cell > as required property for da906{1,2} devices. > + gpio-controller: true > + > + "#gpio-cells": > + const: 2 > + > + gpio: > + type: object > + additionalProperties: false > + properties: > + compatible: > + const: dlg,da9062-gpio > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/regulator/dlg,da9063-regulator.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + pmic@58 { > + compatible = "dlg,da9062"; > + reg = <0x58>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio { > + compatible = "dlg,da9062-gpio"; > + }; I know you had some conversation with Krzysztof, but I still don;t really follow this. Why is the parent, rather than the child, the one that gets the "gpio-controller" and "#gpio-cells" properties? The commit message just mentions why missing child node was added, but not the reason for the gpio properties being added at what appears to be the "wrong" level. Cheers, Conor.
Hi Conor Dooley, Thanks for the feedback. > -----Original Message----- > From: Conor Dooley <conor@kernel.org> > Sent: Monday, December 11, 2023 6:38 PM > Subject: Re: [PATCH v5 8/8] dt-bindings: mfd: dlg,da9063: Convert da9062 > to json-schema > > On Sun, Dec 10, 2023 at 01:47:17PM +0000, Biju Das wrote: > > Convert the da9062 PMIC device tree binding documentation to json- > schema. > > > > Document the missing gpio child node for da9062. > > > > While at it, update description with link to product information and > > example. > > > > The missing child node with of_compatible defined in MFD_CELL_OF is > > causing the below warning message: > > da9062-gpio: Failed to locate of_node [id: -1] > > > > So, make all child nodes with of_compatible defined in struct mfd_cell > > as required property for da906{1,2} devices. > > > + gpio-controller: true > > + > > + "#gpio-cells": > > + const: 2 > > + > > + gpio: > > + type: object > > + additionalProperties: false > > + properties: > > + compatible: > > + const: dlg,da9062-gpio > > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/regulator/dlg,da9063-regulator.h> > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + pmic@58 { > > + compatible = "dlg,da9062"; > > + reg = <0x58>; > > + gpio-controller; > > + #gpio-cells = <2>; > > > + gpio { > > + compatible = "dlg,da9062-gpio"; > > + }; > > I know you had some conversation with Krzysztof, but I still don;t really > follow this. Why is the parent, rather than the child, the one that gets > the "gpio-controller" and "#gpio-cells" properties? The commit message > just mentions why missing child node was added, but not the reason for the > gpio properties being added at what appears to be the "wrong" level. Please see [1], The driver is checking against parent "gpio-controller" [1] https://elixir.bootlin.com/linux/v6.0-rc4/source/drivers/pinctrl/pinctrl-da9062.c#L270 Cheers, Biju
Hi Conor Dooley, > -----Original Message----- > From: Conor Dooley <conor@kernel.org> > Sent: Monday, December 11, 2023 6:38 PM > Subject: Re: [PATCH v5 8/8] dt-bindings: mfd: dlg,da9063: Convert da9062 > to json-schema > > On Sun, Dec 10, 2023 at 01:47:17PM +0000, Biju Das wrote: > > Convert the da9062 PMIC device tree binding documentation to json- > schema. > > > > Document the missing gpio child node for da9062. > > > > While at it, update description with link to product information and > > example. > > > > The missing child node with of_compatible defined in MFD_CELL_OF is > > causing the below warning message: > > da9062-gpio: Failed to locate of_node [id: -1] > > > > So, make all child nodes with of_compatible defined in struct mfd_cell > > as required property for da906{1,2} devices. > > > + gpio-controller: true > > + > > + "#gpio-cells": > > + const: 2 > > + > > + gpio: > > + type: object > > + additionalProperties: false > > + properties: > > + compatible: > > + const: dlg,da9062-gpio > > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/regulator/dlg,da9063-regulator.h> > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + pmic@58 { > > + compatible = "dlg,da9062"; > > + reg = <0x58>; > > + gpio-controller; > > + #gpio-cells = <2>; > > > + gpio { > > + compatible = "dlg,da9062-gpio"; > > + }; > > I know you had some conversation with Krzysztof, but I still don;t really > follow this. Why is the parent, rather than the child, the one that gets > the "gpio-controller" and "#gpio-cells" properties? The commit message > just mentions why missing child node was added, but not the reason for the > gpio properties being added at what appears to be the "wrong" level. The original binding has this in parent. See [1] and driver is based on this documentation[2] [1] https://elixir.bootlin.com/linux/v6.0-rc4/source/Documentation/devicetree/bindings/mfd/da9062.txt#L44 [2] https://elixir.bootlin.com/linux/v6.0-rc4/source/drivers/pinctrl/pinctrl-da9062.c#L270 Cheers, Biju
On Mon, Dec 11, 2023 at 06:51:14PM +0000, Biju Das wrote: > Hi Conor Dooley, > > Thanks for the feedback. > > > -----Original Message----- > > From: Conor Dooley <conor@kernel.org> > > Sent: Monday, December 11, 2023 6:38 PM > > Subject: Re: [PATCH v5 8/8] dt-bindings: mfd: dlg,da9063: Convert da9062 > > to json-schema > > > > On Sun, Dec 10, 2023 at 01:47:17PM +0000, Biju Das wrote: > > > Convert the da9062 PMIC device tree binding documentation to json- > > schema. > > > > > > Document the missing gpio child node for da9062. > > > > > > While at it, update description with link to product information and > > > example. > > > > > > The missing child node with of_compatible defined in MFD_CELL_OF is > > > causing the below warning message: > > > da9062-gpio: Failed to locate of_node [id: -1] > > > > > > So, make all child nodes with of_compatible defined in struct mfd_cell > > > as required property for da906{1,2} devices. > > > > > + gpio-controller: true > > > + > > > + "#gpio-cells": > > > + const: 2 > > > + > > > + gpio: > > > + type: object > > > + additionalProperties: false > > > + properties: > > > + compatible: > > > + const: dlg,da9062-gpio > > > > > + - | > > > + #include <dt-bindings/interrupt-controller/irq.h> > > > + #include <dt-bindings/regulator/dlg,da9063-regulator.h> > > > + i2c { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + pmic@58 { > > > + compatible = "dlg,da9062"; > > > + reg = <0x58>; > > > + gpio-controller; > > > + #gpio-cells = <2>; > > > > > + gpio { > > > + compatible = "dlg,da9062-gpio"; > > > + }; > > > > I know you had some conversation with Krzysztof, but I still don;t really > > follow this. Why is the parent, rather than the child, the one that gets > > the "gpio-controller" and "#gpio-cells" properties? The commit message > > just mentions why missing child node was added, but not the reason for the > > gpio properties being added at what appears to be the "wrong" level. > > > Please see [1], The driver is checking against parent "gpio-controller" > > [1] https://elixir.bootlin.com/linux/v6.0-rc4/source/drivers/pinctrl/pinctrl-da9062.c#L270 I would appreciate if you could note in your commit message the rationale behind the strange setup. Citing the existing driver users etc would be helpful. Thanks, Conor.
Hi Conor Dooley, > -----Original Message----- > From: Conor Dooley <conor@kernel.org> > Sent: Tuesday, December 12, 2023 4:54 PM > Subject: Re: [PATCH v5 8/8] dt-bindings: mfd: dlg,da9063: Convert da9062 > to json-schema > > On Mon, Dec 11, 2023 at 06:51:14PM +0000, Biju Das wrote: > > Hi Conor Dooley, > > > > Thanks for the feedback. > > > > > -----Original Message----- > > > From: Conor Dooley <conor@kernel.org> > > > Sent: Monday, December 11, 2023 6:38 PM > > > Subject: Re: [PATCH v5 8/8] dt-bindings: mfd: dlg,da9063: Convert > > > da9062 to json-schema > > > > > > On Sun, Dec 10, 2023 at 01:47:17PM +0000, Biju Das wrote: > > > > Convert the da9062 PMIC device tree binding documentation to json- > > > schema. > > > > > > > > Document the missing gpio child node for da9062. > > > > > > > > While at it, update description with link to product information > > > > and example. > > > > > > > > The missing child node with of_compatible defined in MFD_CELL_OF > > > > is causing the below warning message: > > > > da9062-gpio: Failed to locate of_node [id: -1] > > > > > > > > So, make all child nodes with of_compatible defined in struct > > > > mfd_cell as required property for da906{1,2} devices. > > > > > > > + gpio-controller: true > > > > + > > > > + "#gpio-cells": > > > > + const: 2 > > > > + > > > > + gpio: > > > > + type: object > > > > + additionalProperties: false > > > > + properties: > > > > + compatible: > > > > + const: dlg,da9062-gpio > > > > > > > + - | > > > > + #include <dt-bindings/interrupt-controller/irq.h> > > > > + #include <dt-bindings/regulator/dlg,da9063-regulator.h> > > > > + i2c { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + pmic@58 { > > > > + compatible = "dlg,da9062"; > > > > + reg = <0x58>; > > > > + gpio-controller; > > > > + #gpio-cells = <2>; > > > > > > > + gpio { > > > > + compatible = "dlg,da9062-gpio"; > > > > + }; > > > > > > I know you had some conversation with Krzysztof, but I still don;t > > > really follow this. Why is the parent, rather than the child, the > > > one that gets the "gpio-controller" and "#gpio-cells" properties? > > > The commit message just mentions why missing child node was added, > > > but not the reason for the gpio properties being added at what appears > to be the "wrong" level. > > > > > > Please see [1], The driver is checking against parent "gpio-controller" > > > > [1] > > https://elixir.bootlin.com/linux/v6.0-rc4/source/drivers/pinctrl/pinct > > rl-da9062.c#L270 > > I would appreciate if you could note in your commit message the rationale > behind the strange setup. Citing the existing driver users etc would be > helpful. OK, I don't add this because the existing binding add this property in parent and driver is based on this documentation. There is no harm in adding this info in commit message as we are converting .txt into .yaml. Cheers, Biju
On 10/12/2023 14:47, Biju Das wrote: > Convert the da9062 PMIC device tree binding documentation to json-schema. > > Document the missing gpio child node for da9062. > > While at it, update description with link to product information and > example. > > The missing child node with of_compatible defined in MFD_CELL_OF is > causing the below warning message: > da9062-gpio: Failed to locate of_node [id: -1] > > So, make all child nodes with of_compatible defined in struct mfd_cell > as required property for da906{1,2} devices. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Some explanation about gpio node and gpio-controller in the main device would be indeed nice, as Conor suggested. But anyway looks good to me. Thank you for the conversion to DT schema. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml index 757a522c102c..1480d95421e1 100644 --- a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml +++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml @@ -11,8 +11,7 @@ maintainers: description: | This module is part of the DA9061/DA9062/DA9063. For more details about entire - DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt - For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml This module provides the KEY_POWER event. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt deleted file mode 100644 index c8a7f119ac84..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/dlg,da9062-onkey.yaml - -- watchdog: See ../watchdog/dlg,da9062-watchdog.yaml - -- thermal : See ../thermal/dlg,da9062-thermal.yaml - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index 676b4f2566ae..da741c999445 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -17,10 +17,17 @@ description: | moment where all voltage monitors are disabled. Next, as da9063 only supports UV *and* OV monitoring, both must be set to the same severity and value (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -35,6 +42,18 @@ properties: "#interrupt-cells": const: 2 + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio: + type: object + additionalProperties: false + properties: + compatible: + const: dlg,da9062-gpio + onkey: $ref: /schemas/input/dlg,da9062-onkey.yaml @@ -42,7 +61,7 @@ properties: type: object additionalProperties: false patternProperties: - "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": $ref: /schemas/regulator/regulator.yaml unevaluatedProperties: false @@ -52,16 +71,85 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9062-rtc + - dlg,da9063-rtc + + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml watchdog: $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml +patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + + required: + - gpio-hog + required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^buck[1-4]$": false + thermal: false + required: + - interrupts + - interrupt-controller + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -118,4 +206,121 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9063-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + gpio-controller; + #gpio-cells = <2>; + + sd0-pwr-sel-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "SD0_PWR_SEL"; + }; + + sd1-pwr-sel-hog { + gpio-hog; + gpios = <2 0>; + input; + line-name = "SD1_PWR_SEL"; + }; + + sw-et0-en-hog { + gpio-hog; + gpios = <3 0>; + input; + line-name = "SW_ET0_EN#"; + }; + + pmic-good-hog { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PMIC_PGOOD"; + }; + + gpio { + compatible = "dlg,da9062-gpio"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml index 206635f74850..e8b2cac41084 100644 --- a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml @@ -11,7 +11,7 @@ maintainers: description: | This module is part of the DA9061/DA9062. For more details about entire - DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt + DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml Junction temperature thermal module uses an interrupt signal to identify high THERMAL_TRIP_HOT temperatures for the PMIC device.
Convert the da9062 PMIC device tree binding documentation to json-schema. Document the missing gpio child node for da9062. While at it, update description with link to product information and example. The missing child node with of_compatible defined in MFD_CELL_OF is causing the below warning message: da9062-gpio: Failed to locate of_node [id: -1] So, make all child nodes with of_compatible defined in struct mfd_cell as required property for da906{1,2} devices. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v4->v5: * Updated commit description * Dropped unnecessary ref from gpio child node. * Added gpio-hog pattern property * Moved gpio-controller,gpio-cells above child nodes * Sorted compatible in rtc child node. * Dropped status from example. * Updated the example. v3->v4: * Split the thermal binding patch separate. * Updated the description. v2->v3: * Fixed bot errors related to MAINTAINERS entry, invalid doc references and thermal examples by merging patch#4. v2: * New patch --- .../bindings/input/dlg,da9062-onkey.yaml | 3 +- .../devicetree/bindings/mfd/da9062.txt | 124 ---------- .../devicetree/bindings/mfd/dlg,da9063.yaml | 215 +++++++++++++++++- .../bindings/thermal/dlg,da9062-thermal.yaml | 2 +- 4 files changed, 212 insertions(+), 132 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt