| Message ID | 20231215-x1e80100-dts-missing-nodes-v3-0-c4e8d186adf2@linaro.org |
|---|---|
| Headers | show |
| Series | arm64: dts: qcom: Add missing nodes to X1E80100 base dtsi and CRD dts | expand |
On 12/14/23 23:48, Abel Vesa wrote: > Enable touchscreen, touchpad, keyboard, display, pcie and usb > support. > > Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com> > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> > Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com> > Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 221 ++++++++++++++++++++++++++++++ > 1 file changed, 221 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > index 7532d8eca2de..d44898453315 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > @@ -401,10 +401,144 @@ vreg_l3j_0p8: ldo3 { > }; > }; > > +&i2c0 { > + clock-frequency = <400000>; > + > + status = "okay"; > + > + touchpad@15 { > + compatible = "hid-over-i2c"; > + reg = <0x15>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tpad_default>; property-n property-names patch-wide otherwise Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
This patchset adds most of the nodes towards describing the entire platform. Most of these have dependencies on multimedia clock controllers and so the entire patchset depends on the clock controllers patchset: https://lore.kernel.org/all/20231214-x1e80100-clock-controllers-v2-0-2b0739bebd27@linaro.org/ Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- Changes in v3: - Reword the commit messages - Link to v2: https://lore.kernel.org/r/20231215-x1e80100-dts-missing-nodes-v2-0-5a6efc04d00c@linaro.org Changes in v2: - Reword both commits to make it more clear nodes that are being added - Dropped comments from interrupt maps from pcie nodes - Replace all 0x0 with 0 in all reg properties - Moved on separate lines reg, reset and clock names - Dropped the sram and cpucp nodes - Dropped pmic glink node - Reordered all new clock controller nodes based on address - Dropped unnecessary indent from touchpad and keyboard TLMM nodes - Link to v1: https://lore.kernel.org/r/20231212-x1e80100-dts-missing-nodes-v1-0-1472efec2b08@linaro.org --- Abel Vesa (2): arm64: dts: qcom: x1e80100: Add more support arm64: dts: qcom: x1e80100-crd: Enable more support arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 221 +++++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1323 ++++++++++++++++++++++++++++- 2 files changed, 1539 insertions(+), 5 deletions(-) --- base-commit: d0f93829813ccb38ad35811da864672e32595f9c change-id: 20231201-x1e80100-dts-missing-nodes-a09f1ed99999 Best regards,