| Message ID | 20240215-b4-qcom-common-target-v4-15-ed06355c634a@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Qualcomm generic board support | expand |
On 15/02/2024 21:52, Caleb Connolly wrote: > On the DB410c we support running as a first stage bootloader. This > requires initialising the GPIOs which are muxed to UART before they can > be used. Add DM_FLAG_PRE_RELOC to the apq8016 pinctrl driver to ensure > that we do this early enough. > > This is required to prevent the first few lines of UART log from being > dropped. > > Reported-by: Sumit Garg <sumit.garg@linaro.org> > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > drivers/pinctrl/qcom/pinctrl-apq8016.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c > index 10796710ba7a..df5bd1c19f6e 100644 > --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c > +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c > @@ -73,4 +73,5 @@ U_BOOT_DRIVER(pinctrl_apq8016) = { > .of_match = msm_pinctrl_ids, > .ops = &msm_pinctrl_ops, > .bind = msm_pinctrl_bind, > + .flags = DM_FLAG_PRE_RELOC, > }; > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On Fri, 16 Feb 2024 at 02:22, Caleb Connolly <caleb.connolly@linaro.org> wrote: > > On the DB410c we support running as a first stage bootloader. This > requires initialising the GPIOs which are muxed to UART before they can > be used. Add DM_FLAG_PRE_RELOC to the apq8016 pinctrl driver to ensure > that we do this early enough. > > This is required to prevent the first few lines of UART log from being > dropped. > > Reported-by: Sumit Garg <sumit.garg@linaro.org> > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > drivers/pinctrl/qcom/pinctrl-apq8016.c | 1 + > 1 file changed, 1 insertion(+) > Reviewed-by: Sumit Garg <sumit.garg@linaro.org> -Sumit > diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c > index 10796710ba7a..df5bd1c19f6e 100644 > --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c > +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c > @@ -73,4 +73,5 @@ U_BOOT_DRIVER(pinctrl_apq8016) = { > .of_match = msm_pinctrl_ids, > .ops = &msm_pinctrl_ops, > .bind = msm_pinctrl_bind, > + .flags = DM_FLAG_PRE_RELOC, > }; > > -- > 2.43.1 >
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c index 10796710ba7a..df5bd1c19f6e 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c @@ -73,4 +73,5 @@ U_BOOT_DRIVER(pinctrl_apq8016) = { .of_match = msm_pinctrl_ids, .ops = &msm_pinctrl_ops, .bind = msm_pinctrl_bind, + .flags = DM_FLAG_PRE_RELOC, };
On the DB410c we support running as a first stage bootloader. This requires initialising the GPIOs which are muxed to UART before they can be used. Add DM_FLAG_PRE_RELOC to the apq8016 pinctrl driver to ensure that we do this early enough. This is required to prevent the first few lines of UART log from being dropped. Reported-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- drivers/pinctrl/qcom/pinctrl-apq8016.c | 1 + 1 file changed, 1 insertion(+)