| Message ID | 20240315-b4-qcom-livetree-v2-13-ab635774b2dc@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Qualcomm platform USB support | expand |
On 15/03/2024 16:10, Caleb Connolly wrote: > Qualcomm FDTs are on the larger size, and with the addition of DT > modifications during board_init() it makes sense to enable OF_LIVE > globally. The cost of building the tree should be offset by the > increased efficiency at which we can walk it. > > Some rough measurements with CONFIG_BOOTSTAGE suggests that this might > add 0.1-0.2ms to the boot-to-console time. However the reset-to-reset > timer difference is in the range of 0.5ms so this could just be noise. > > Suffice to say, no significant slow down. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > configs/qcom_defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index cbc612b44bd9..eebd0d74bd51 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -25,8 +25,11 @@ CONFIG_CMD_UFS=y > CONFIG_CMD_USB=y > CONFIG_CMD_CAT=y > CONFIG_CMD_BMP=y > CONFIG_CMD_LOG=y > +CONFIG_OF_LIVE=y > +# CONFIG_NET is not set > +# CONFIG_OFNODE_MULTI_TREE is not set > CONFIG_BUTTON_QCOM_PMIC=y > CONFIG_CLK=y > CONFIG_CLK_QCOM_QCS404=y > CONFIG_CLK_QCOM_SDM845=y > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index cbc612b44bd9..eebd0d74bd51 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -25,8 +25,11 @@ CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_CAT=y CONFIG_CMD_BMP=y CONFIG_CMD_LOG=y +CONFIG_OF_LIVE=y +# CONFIG_NET is not set +# CONFIG_OFNODE_MULTI_TREE is not set CONFIG_BUTTON_QCOM_PMIC=y CONFIG_CLK=y CONFIG_CLK_QCOM_QCS404=y CONFIG_CLK_QCOM_SDM845=y
Qualcomm FDTs are on the larger size, and with the addition of DT modifications during board_init() it makes sense to enable OF_LIVE globally. The cost of building the tree should be offset by the increased efficiency at which we can walk it. Some rough measurements with CONFIG_BOOTSTAGE suggests that this might add 0.1-0.2ms to the boot-to-console time. However the reset-to-reset timer difference is in the range of 0.5ms so this could just be noise. Suffice to say, no significant slow down. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- configs/qcom_defconfig | 3 +++ 1 file changed, 3 insertions(+)