diff mbox series

[v6,3/3] regulator: add s2dos05 regulator support

Message ID 20241007-starqltechn_integration_upstream-v6-3-264309aa66de@gmail.com
State New
Headers show
Series Add Samsung s2dos05 pmic support | expand

Commit Message

Dzmitry Sankouski Oct. 7, 2024, 2:50 p.m. UTC 
S2DOS05 has 1 buck and 4 LDO regulators, used for powering
panel/touchscreen.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- run sparse and smatch
- initialize ret variable

Changes in v5:
- fix Kconfig and module description to be the same
- make regulators const
- code refactoring
- replace s2m* pattern on s2* to include s2dos05

Changes in v4:
- remove excessive linux/module.h import
- use generic regulator helpers
- use of_match
- use devm_* for mem allocations
- use // style comment
- drop all junk Samsung code
- adjust to depend on sec-core
---
 MAINTAINERS                           |   2 +-
 drivers/regulator/Kconfig             |   8 +++++
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/s2dos05-regulator.c | 176 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/regulator/s2dos05.h     |  73 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 259 insertions(+), 1 deletion(-)

Comments

Mark Brown Oct. 7, 2024, 2:56 p.m. UTC | #1 
On Mon, Oct 07, 2024 at 05:50:01PM +0300, Dzmitry Sankouski wrote:
> S2DOS05 has 1 buck and 4 LDO regulators, used for powering
> panel/touchscreen.

Reviewed-by: Mark Brown <broonie@kernel.org>
Lee Jones Oct. 9, 2024, 2:31 p.m. UTC | #2 
On Mon, 07 Oct 2024, Mark Brown wrote:

> On Mon, Oct 07, 2024 at 05:50:01PM +0300, Dzmitry Sankouski wrote:
> > S2DOS05 has 1 buck and 4 LDO regulators, used for powering
> > panel/touchscreen.
> 
> Reviewed-by: Mark Brown <broonie@kernel.org>

I think you can merge this.
Lee Jones Oct. 15, 2024, 9:03 a.m. UTC | #3 
On Wed, 09 Oct 2024, Lee Jones wrote:

> On Mon, 07 Oct 2024, Mark Brown wrote:
> 
> > On Mon, Oct 07, 2024 at 05:50:01PM +0300, Dzmitry Sankouski wrote:
> > > S2DOS05 has 1 buck and 4 LDO regulators, used for powering
> > > panel/touchscreen.
> > 
> > Reviewed-by: Mark Brown <broonie@kernel.org>
> 
> I think you can merge this.

I didn't mean the whole set. *facepalm*
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index ae6564d98caa..ae9c62ff3027 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20481,7 +20481,7 @@  F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
 F:	drivers/clk/clk-s2mps11.c
 F:	drivers/mfd/sec*.c
-F:	drivers/regulator/s2m*.c
+F:	drivers/regulator/s2*.c
 F:	drivers/regulator/s5m*.c
 F:	drivers/rtc/rtc-s5m.c
 F:	include/linux/mfd/samsung/
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 39297f7d8177..249933d6388d 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1322,6 +1322,14 @@  config REGULATOR_RTQ2208
 	  and two ldos. It features wide output voltage range from 0.4V to 2.05V
 	  and the capability to configure the corresponding power stages.
 
+config REGULATOR_S2DOS05
+	tristate "Samsung S2DOS05 voltage regulator"
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	help
+	  This driver provides support for the voltage regulators of the S2DOS05.
+	  The S2DOS05 is a companion power management IC for the smart phones.
+	  The S2DOS05 has 4 LDOs and 1 BUCK outputs.
+
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
 	depends on MFD_SEC_CORE || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3d5a803dce8a..9b69546fb3f6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -154,6 +154,7 @@  obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ6752)	+= rtq6752-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ2208) += rtq2208-regulator.o
+obj-$(CONFIG_REGULATOR_S2DOS05) += s2dos05-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/regulator/s2dos05-regulator.c b/drivers/regulator/s2dos05-regulator.c
new file mode 100644
index 000000000000..db304f2988cf
--- /dev/null
+++ b/drivers/regulator/s2dos05-regulator.c
@@ -0,0 +1,176 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+//
+// s2dos05.c - Regulator driver for the Samsung s2dos05
+//
+// Copyright (C) 2024 Dzmitry Sankouski <dsankouski@gmail.com>
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/regulator/s2dos05.h>
+#include <linux/i2c.h>
+
+struct s2dos05_data {
+	struct regmap *regmap;
+	struct device *dev;
+};
+
+#define _BUCK(macro)	S2DOS05_BUCK##macro
+#define _buck_ops(num)	s2dos05_ops##num
+#define _LDO(macro)	S2DOS05_LDO##macro
+#define _REG(ctrl)	S2DOS05_REG##ctrl
+#define _ldo_ops(num)	s2dos05_ops##num
+#define _MASK(macro)	S2DOS05_ENABLE_MASK##macro
+#define _TIME(macro)	S2DOS05_ENABLE_TIME##macro
+
+#define BUCK_DESC(_name, _id, _ops, m, s, v, e, em, t, a) {	\
+	.name		= _name,				\
+	.id		= _id,					\
+	.ops		= _ops,					\
+	.of_match = of_match_ptr(_name),			\
+	.of_match_full_name = true,				\
+	.regulators_node = of_match_ptr("regulators"),		\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= m,					\
+	.uV_step	= s,					\
+	.n_voltages	= S2DOS05_BUCK_N_VOLTAGES,		\
+	.vsel_reg	= v,					\
+	.vsel_mask	= S2DOS05_BUCK_VSEL_MASK,		\
+	.enable_reg	= e,					\
+	.enable_mask	= em,					\
+	.enable_time	= t,					\
+	.active_discharge_off = 0,				\
+	.active_discharge_on = S2DOS05_BUCK_FD_MASK,		\
+	.active_discharge_reg	= a,				\
+	.active_discharge_mask	= S2DOS05_BUCK_FD_MASK		\
+}
+
+#define LDO_DESC(_name, _id, _ops, m, s, v, e, em, t, a) {	\
+	.name		= _name,				\
+	.id		= _id,					\
+	.ops		= _ops,					\
+	.of_match = of_match_ptr(_name),			\
+	.of_match_full_name = true,				\
+	.regulators_node = of_match_ptr("regulators"),		\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= m,					\
+	.uV_step	= s,					\
+	.n_voltages	= S2DOS05_LDO_N_VOLTAGES,		\
+	.vsel_reg	= v,					\
+	.vsel_mask	= S2DOS05_LDO_VSEL_MASK,		\
+	.enable_reg	= e,					\
+	.enable_mask	= em,					\
+	.enable_time	= t,					\
+	.active_discharge_off = 0,				\
+	.active_discharge_on = S2DOS05_LDO_FD_MASK,		\
+	.active_discharge_reg	= a,				\
+	.active_discharge_mask	= S2DOS05_LDO_FD_MASK		\
+}
+
+static const struct regulator_ops s2dos05_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_active_discharge	= regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_desc regulators[S2DOS05_REGULATOR_MAX] = {
+		// name, id, ops, min_uv, uV_step, vsel_reg, enable_reg
+		LDO_DESC("ldo1", _LDO(1), &_ldo_ops(), _LDO(_MIN1),
+			_LDO(_STEP1), _REG(_LDO1_CFG),
+			_REG(_EN), _MASK(_L1), _TIME(_LDO), _REG(_LDO1_CFG)),
+		LDO_DESC("ldo2", _LDO(2), &_ldo_ops(), _LDO(_MIN1),
+			_LDO(_STEP1), _REG(_LDO2_CFG),
+			_REG(_EN), _MASK(_L2), _TIME(_LDO), _REG(_LDO2_CFG)),
+		LDO_DESC("ldo3", _LDO(3), &_ldo_ops(), _LDO(_MIN2),
+			_LDO(_STEP1), _REG(_LDO3_CFG),
+			_REG(_EN), _MASK(_L3), _TIME(_LDO), _REG(_LDO3_CFG)),
+		LDO_DESC("ldo4", _LDO(4), &_ldo_ops(), _LDO(_MIN2),
+			_LDO(_STEP1), _REG(_LDO4_CFG),
+			_REG(_EN), _MASK(_L4), _TIME(_LDO), _REG(_LDO4_CFG)),
+		BUCK_DESC("buck", _BUCK(1), &_buck_ops(), _BUCK(_MIN1),
+			_BUCK(_STEP1), _REG(_BUCK_VOUT),
+			_REG(_EN), _MASK(_B1), _TIME(_BUCK), _REG(_BUCK_CFG)),
+};
+
+static int s2dos05_pmic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct of_regulator_match *rdata = NULL;
+	struct s2dos05_data *s2dos05;
+	struct regulator_config config = { };
+	unsigned int rdev_num = ARRAY_SIZE(regulators);
+	int i, ret = 0;
+
+	s2dos05 = devm_kzalloc(dev, sizeof(*s2dos05), GFP_KERNEL);
+	if (!s2dos05)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, s2dos05);
+
+	rdata = devm_kcalloc(dev, rdev_num, sizeof(*rdata), GFP_KERNEL);
+	if (!rdata)
+		return -ENOMEM;
+
+	for (i = 0; i < rdev_num; i++)
+		rdata[i].name = regulators[i].name;
+
+	s2dos05->regmap = iodev->regmap_pmic;
+	s2dos05->dev = dev;
+	if (!dev->of_node)
+		dev->of_node = dev->parent->of_node;
+
+	for (i = 0; i < rdev_num; i++) {
+		struct regulator_dev *regulator;
+
+		config.init_data = rdata[i].init_data;
+		config.of_node = rdata[i].of_node;
+		config.dev = dev;
+		config.driver_data = s2dos05;
+		regulator = devm_regulator_register(&pdev->dev,
+						&regulators[i], &config);
+		if (IS_ERR(regulator)) {
+			ret = PTR_ERR(regulator);
+			dev_err(&pdev->dev, "regulator init failed for %d\n",
+				i);
+		}
+	}
+
+	return ret;
+}
+
+static const struct platform_device_id s2dos05_pmic_id[] = {
+	{ "s2dos05-regulator" },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s2dos05_pmic_id);
+
+static struct platform_driver s2dos05_platform_driver = {
+	.driver = {
+		.name = "s2dos05",
+	},
+	.probe = s2dos05_pmic_probe,
+	.id_table = s2dos05_pmic_id,
+};
+module_platform_driver(s2dos05_platform_driver);
+
+MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@gmail.com>");
+MODULE_DESCRIPTION("Samsung S2DOS05 Regulator Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/s2dos05.h b/include/linux/regulator/s2dos05.h
new file mode 100644
index 000000000000..2e89fcbce769
--- /dev/null
+++ b/include/linux/regulator/s2dos05.h
@@ -0,0 +1,73 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+// s2dos05.h
+//
+// Copyright (c) 2016 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
+// Copyright (C) 2024 Dzmitry Sankouski <dsankouski@gmail.com>
+
+#ifndef __LINUX_S2DOS05_H
+#define __LINUX_S2DOS05_H
+
+// S2DOS05 registers
+// Slave Addr : 0xC0
+enum S2DOS05_reg {
+	S2DOS05_REG_DEV_ID,
+	S2DOS05_REG_TOPSYS_STAT,
+	S2DOS05_REG_STAT,
+	S2DOS05_REG_EN,
+	S2DOS05_REG_LDO1_CFG,
+	S2DOS05_REG_LDO2_CFG,
+	S2DOS05_REG_LDO3_CFG,
+	S2DOS05_REG_LDO4_CFG,
+	S2DOS05_REG_BUCK_CFG,
+	S2DOS05_REG_BUCK_VOUT,
+	S2DOS05_REG_IRQ_MASK = 0x0D,
+	S2DOS05_REG_SSD_TSD = 0x0E,
+	S2DOS05_REG_OCL = 0x10,
+	S2DOS05_REG_IRQ = 0x11
+};
+
+// S2DOS05 regulator ids
+enum S2DOS05_regulators {
+	S2DOS05_LDO1,
+	S2DOS05_LDO2,
+	S2DOS05_LDO3,
+	S2DOS05_LDO4,
+	S2DOS05_BUCK1,
+	S2DOS05_REG_MAX,
+};
+
+#define S2DOS05_IRQ_PWRMT_MASK	BIT(5)
+#define S2DOS05_IRQ_TSD_MASK	BIT(4)
+#define S2DOS05_IRQ_SSD_MASK	BIT(3)
+#define S2DOS05_IRQ_SCP_MASK	BIT(2)
+#define S2DOS05_IRQ_UVLO_MASK	BIT(1)
+#define S2DOS05_IRQ_OCD_MASK	BIT(0)
+
+#define S2DOS05_BUCK_MIN1	506250
+#define S2DOS05_LDO_MIN1	1500000
+#define S2DOS05_LDO_MIN2	2700000
+#define S2DOS05_BUCK_STEP1	6250
+#define S2DOS05_LDO_STEP1	25000
+#define S2DOS05_LDO_VSEL_MASK	0x7F
+#define S2DOS05_LDO_FD_MASK	0x80
+#define S2DOS05_BUCK_VSEL_MASK	0xFF
+#define S2DOS05_BUCK_FD_MASK	0x08
+
+#define S2DOS05_ENABLE_MASK_L1	BIT(0)
+#define S2DOS05_ENABLE_MASK_L2	BIT(1)
+#define S2DOS05_ENABLE_MASK_L3	BIT(2)
+#define S2DOS05_ENABLE_MASK_L4	BIT(3)
+#define S2DOS05_ENABLE_MASK_B1	BIT(4)
+
+#define S2DOS05_RAMP_DELAY	12000
+
+#define S2DOS05_ENABLE_TIME_LDO		50
+#define S2DOS05_ENABLE_TIME_BUCK	350
+
+#define S2DOS05_LDO_N_VOLTAGES	(S2DOS05_LDO_VSEL_MASK + 1)
+#define S2DOS05_BUCK_N_VOLTAGES (S2DOS05_BUCK_VSEL_MASK + 1)
+
+#define S2DOS05_REGULATOR_MAX	(S2DOS05_REG_MAX)
+
+#endif // __LINUX_S2DOS05_H