diff mbox series

[v2] device: only use the address type selection algorithm when remote device is a dual-mode device when pair device

Message ID 20241029075830.1268747-1-quic_chejiang@quicinc.com
State New
Headers show
Series [v2] device: only use the address type selection algorithm when remote device is a dual-mode device when pair device | expand

Commit Message

Cheng Jiang (IOE) Oct. 29, 2024, 7:58 a.m. UTC 
For a BLE-only device, if the device is already paired and the upper
layer attempts to pair it again, the bdaddr_type will be set to
BDADDR_BREDR since the LE connection is already bonded. This causes the
device to use the BR/EDR bearer, which stalls the pairing procedure and
requires waiting for the pairing timeout.

The bluetoothctl log below shows the error result:

[bluetooth]# pair ED:8E:0E:B3:85:C1
Attempting to pair with ED:8E:0E:B3:85:C1
Pairing successful
[RAPOO BleMouse]# disconnect ED:8E:0E:B3:85:C1
Attempting to disconnect from ED:8E:0E:B3:85:C1
[RAPOO BleMouse]#
[bluetooth]# devices Paired
Device ED:8E:0E:B3:85:C1 RAPOO BleMouse
[bluetooth]# scan le
SetDiscoveryFilter success
Discovery started
[CHG] Controller 8C:FD:F0:21:84:17 Discovering: yes
[CHG] Device ED:8E:0E:B3:85:C1 RSSI: -38
[bluetooth]# scan off
Discovery stopped
[bluetooth]# pair ED:8E:0E:B3:85:C1
Attempting to pair with ED:8E:0E:B3:85:C1
[bluetooth]#
Failed to pair: org.freedesktop.DBus.Error.NoReply
---
 src/device.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

Comments

patchwork-bot+bluetooth@kernel.org Oct. 29, 2024, 2:50 p.m. UTC | #1 
Hello:

This patch was applied to bluetooth/bluez.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Tue, 29 Oct 2024 15:58:30 +0800 you wrote:
> For a BLE-only device, if the device is already paired and the upper
> layer attempts to pair it again, the bdaddr_type will be set to
> BDADDR_BREDR since the LE connection is already bonded. This causes the
> device to use the BR/EDR bearer, which stalls the pairing procedure and
> requires waiting for the pairing timeout.
> 
> The bluetoothctl log below shows the error result:
> 
> [...]

Here is the summary with links:
  - [v2] device: only use the address type selection algorithm when remote device is a dual-mode device when pair device
    https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=6d55c7d7fd0d

You are awesome, thank you!
diff mbox series

Patch

diff --git a/src/device.c b/src/device.c
index 7585184de..2b3d19f55 100644
--- a/src/device.c
+++ b/src/device.c
@@ -3077,12 +3077,25 @@  static DBusMessage *pair_device(DBusConnection *conn, DBusMessage *msg,
 	if (device->bonding)
 		return btd_error_in_progress(msg);
 
-	if (device->bredr_state.bonded)
+	/* Only use this selection algorithms when device is combo
+	 * chip. Ohterwise, it will use the wrong bearer to establish
+	 * a connection if the device is already paired, which will
+	 * stall the pairing procedure. For example, for a BLE only
+	 * device, if the device is already paired, and upper layer
+	 * issue the pair device again, it will set bdaddr_type to
+	 * BDADDR_BREDR since LE is bonded, then it goes with BR/EDR
+	 * bearer.
+	 */
+	if (device->bredr && device->le) {
+		if (device->bredr_state.bonded)
+			bdaddr_type = device->bdaddr_type;
+		else if (device->le_state.bonded)
+			bdaddr_type = BDADDR_BREDR;
+		else
+			bdaddr_type = select_conn_bearer(device);
+	} else {
 		bdaddr_type = device->bdaddr_type;
-	else if (device->le_state.bonded)
-		bdaddr_type = BDADDR_BREDR;
-	else
-		bdaddr_type = select_conn_bearer(device);
+	}
 
 	state = get_state(device, bdaddr_type);