@@ -56,6 +56,16 @@ config TYPEC_MUX_NB7VPQ904M
Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C
redriver chip found on some devices with a Type-C port.
+config TYPEC_MUX_PS883X
+ tristate "Parade PS883x Type-C retimer driver"
+ depends on I2C
+ depends on DRM || DRM=n
+ select DRM_AUX_BRIDGE if DRM_BRIDGE && OF
+ select REGMAP_I2C
+ help
+ Say Y or M if your system has a Parade PS883x Type-C retimer chip
+ found on some devices with a Type-C port.
+
config TYPEC_MUX_PTN36502
tristate "NXP PTN36502 Type-C redriver driver"
depends on I2C
@@ -6,5 +6,6 @@ obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o
obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o
+obj-$(CONFIG_TYPEC_MUX_PS883X) += ps883x.o
obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o
obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o
new file mode 100644
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Parade ps883x usb retimer driver
+ *
+ * Copyright (C) 2024 Linaro Ltd.
+ */
+
+#include <drm/bridge/aux-bridge.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/usb/typec_retimer.h>
+
+struct ps883x_retimer {
+ struct i2c_client *client;
+ struct gpio_desc *reset_gpio;
+ struct regmap *regmap;
+ struct typec_switch_dev *sw;
+ struct typec_retimer *retimer;
+ struct clk *xo_clk;
+ struct regulator *vdd_supply;
+ struct regulator *vdd33_supply;
+ struct regulator *vdd33_cap_supply;
+ struct regulator *vddat_supply;
+ struct regulator *vddar_supply;
+ struct regulator *vddio_supply;
+
+ struct typec_switch *typec_switch;
+ struct typec_mux *typec_mux;
+
+ struct mutex lock; /* protect non-concurrent retimer & switch */
+
+ enum typec_orientation orientation;
+ unsigned long mode;
+ unsigned int svid;
+};
+
+static void ps883x_configure(struct ps883x_retimer *retimer, int cfg0, int cfg1, int cfg2)
+{
+ regmap_write(retimer->regmap, 0x0, cfg0);
+ regmap_write(retimer->regmap, 0x1, cfg1);
+ regmap_write(retimer->regmap, 0x2, cfg2);
+}
+
+static int ps883x_set(struct ps883x_retimer *retimer)
+{
+ int cfg0 = 0x00;
+ int cfg1 = 0x00;
+ int cfg2 = 0x00;
+
+ if (retimer->orientation == TYPEC_ORIENTATION_NONE ||
+ retimer->mode == TYPEC_STATE_SAFE) {
+ ps883x_configure(retimer, 0x1, 0x0, 0x0);
+ return 0;
+ }
+
+ if (retimer->mode != TYPEC_STATE_USB && retimer->svid != USB_TYPEC_DP_SID)
+ return -EINVAL;
+
+ if (retimer->orientation == TYPEC_ORIENTATION_NORMAL)
+ cfg0 = 0x01;
+ else
+ cfg0 = 0x03;
+
+ switch (retimer->mode) {
+ case TYPEC_STATE_USB:
+ cfg0 |= 0x20;
+ break;
+
+ case TYPEC_DP_STATE_C:
+ cfg1 = 0x85;
+ break;
+
+ case TYPEC_DP_STATE_D:
+ cfg0 |= 0x20;
+ cfg1 = 0x85;
+ break;
+
+ case TYPEC_DP_STATE_E:
+ cfg1 = 0x81;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ ps883x_configure(retimer, cfg0, cfg1, cfg2);
+
+ return 0;
+}
+
+static int ps883x_sw_set(struct typec_switch_dev *sw,
+ enum typec_orientation orientation)
+{
+ struct ps883x_retimer *retimer = typec_switch_get_drvdata(sw);
+ int ret = 0;
+
+ ret = typec_switch_set(retimer->typec_switch, orientation);
+ if (ret)
+ return ret;
+
+ mutex_lock(&retimer->lock);
+
+ if (retimer->orientation != orientation) {
+ retimer->orientation = orientation;
+
+ ret = ps883x_set(retimer);
+ }
+
+ mutex_unlock(&retimer->lock);
+
+ return ret;
+}
+
+static int ps883x_retimer_set(struct typec_retimer *rtmr,
+ struct typec_retimer_state *state)
+{
+ struct ps883x_retimer *retimer = typec_retimer_get_drvdata(rtmr);
+ struct typec_mux_state mux_state;
+ int ret = 0;
+
+ mutex_lock(&retimer->lock);
+
+ if (state->mode != retimer->mode) {
+ retimer->mode = state->mode;
+
+ if (state->alt)
+ retimer->svid = state->alt->svid;
+ else
+ retimer->svid = 0; // No SVID
+
+ ret = ps883x_set(retimer);
+ }
+
+ mutex_unlock(&retimer->lock);
+
+ if (ret)
+ return ret;
+
+ mux_state.alt = state->alt;
+ mux_state.data = state->data;
+ mux_state.mode = state->mode;
+
+ return typec_mux_set(retimer->typec_mux, &mux_state);
+}
+
+static int ps883x_enable_vregs(struct ps883x_retimer *retimer)
+{
+ struct device *dev = &retimer->client->dev;
+ int ret;
+
+ ret = regulator_enable(retimer->vdd33_supply);
+ if (ret) {
+ dev_err(dev, "cannot enable VDD 3.3V regulator: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(retimer->vdd33_cap_supply);
+ if (ret) {
+ dev_err(dev, "cannot enable VDD 3.3V CAP regulator: %d\n", ret);
+ goto err_vdd33_disable;
+ }
+
+ usleep_range(4000, 10000);
+
+ ret = regulator_enable(retimer->vdd_supply);
+ if (ret) {
+ dev_err(dev, "cannot enable VDD regulator: %d\n", ret);
+ goto err_vdd33_cap_disable;
+ }
+
+ ret = regulator_enable(retimer->vddar_supply);
+ if (ret) {
+ dev_err(dev, "cannot enable VDD AR regulator: %d\n", ret);
+ goto err_vdd_disable;
+ }
+
+ ret = regulator_enable(retimer->vddat_supply);
+ if (ret) {
+ dev_err(dev, "cannot enable VDD AT regulator: %d\n", ret);
+ goto err_vddar_disable;
+ }
+
+ ret = regulator_enable(retimer->vddio_supply);
+ if (ret) {
+ dev_err(dev, "cannot enable VDD IO regulator: %d\n", ret);
+ goto err_vddat_disable;
+ }
+
+ return 0;
+
+err_vddat_disable:
+ regulator_disable(retimer->vddat_supply);
+err_vddar_disable:
+ regulator_disable(retimer->vddar_supply);
+err_vdd_disable:
+ regulator_disable(retimer->vdd_supply);
+err_vdd33_cap_disable:
+ regulator_disable(retimer->vdd33_cap_supply);
+err_vdd33_disable:
+ regulator_disable(retimer->vdd33_supply);
+
+ return ret;
+}
+
+static void ps883x_disable_vregs(struct ps883x_retimer *retimer)
+{
+ regulator_disable(retimer->vddio_supply);
+ regulator_disable(retimer->vddat_supply);
+ regulator_disable(retimer->vddar_supply);
+ regulator_disable(retimer->vdd_supply);
+ regulator_disable(retimer->vdd33_cap_supply);
+ regulator_disable(retimer->vdd33_supply);
+}
+
+static int ps883x_get_vregs(struct ps883x_retimer *retimer)
+{
+ struct device *dev = &retimer->client->dev;
+
+ retimer->vdd_supply = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(retimer->vdd_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vdd_supply),
+ "failed to get VDD\n");
+
+ retimer->vdd33_supply = devm_regulator_get(dev, "vdd33");
+ if (IS_ERR(retimer->vdd33_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vdd33_supply),
+ "failed to get VDD 3.3V\n");
+
+ retimer->vdd33_cap_supply = devm_regulator_get(dev, "vdd33-cap");
+ if (IS_ERR(retimer->vdd33_cap_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vdd33_cap_supply),
+ "failed to get VDD CAP 3.3V\n");
+
+ retimer->vddat_supply = devm_regulator_get(dev, "vddat");
+ if (IS_ERR(retimer->vddat_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vddat_supply),
+ "failed to get VDD AT\n");
+
+ retimer->vddar_supply = devm_regulator_get(dev, "vddar");
+ if (IS_ERR(retimer->vddar_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vddar_supply),
+ "failed to get VDD AR\n");
+
+ retimer->vddio_supply = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(retimer->vddio_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vddio_supply),
+ "failed to get VDD IO\n");
+
+ return 0;
+}
+
+static const struct regmap_config ps883x_retimer_regmap = {
+ .max_register = 0x1f,
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int ps883x_retimer_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct typec_switch_desc sw_desc = { };
+ struct typec_retimer_desc rtmr_desc = { };
+ struct ps883x_retimer *retimer;
+ int ret;
+
+ retimer = devm_kzalloc(dev, sizeof(*retimer), GFP_KERNEL);
+ if (!retimer)
+ return -ENOMEM;
+
+ retimer->client = client;
+
+ mutex_init(&retimer->lock);
+
+ retimer->regmap = devm_regmap_init_i2c(client, &ps883x_retimer_regmap);
+ if (IS_ERR(retimer->regmap)) {
+ ret = PTR_ERR(retimer->regmap);
+ dev_err(dev, "failed to allocate register map: %d\n", ret);
+ return ret;
+ }
+
+ ret = ps883x_get_vregs(retimer);
+ if (ret)
+ return ret;
+
+ retimer->xo_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(retimer->xo_clk))
+ return dev_err_probe(dev, PTR_ERR(retimer->xo_clk),
+ "failed to get xo clock\n");
+
+ retimer->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
+ if (IS_ERR(retimer->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(retimer->reset_gpio),
+ "failed to get reset gpio\n");
+
+ retimer->typec_switch = typec_switch_get(dev);
+ if (IS_ERR(retimer->typec_switch))
+ return dev_err_probe(dev, PTR_ERR(retimer->typec_switch),
+ "failed to acquire orientation-switch\n");
+
+ retimer->typec_mux = typec_mux_get(dev);
+ if (IS_ERR(retimer->typec_mux)) {
+ ret = dev_err_probe(dev, PTR_ERR(retimer->typec_mux),
+ "failed to acquire mode-mux\n");
+ goto err_switch_put;
+ }
+
+ ret = drm_aux_bridge_register(dev);
+ if (ret)
+ goto err_mux_put;
+
+ ret = clk_prepare_enable(retimer->xo_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable XO: %d\n", ret);
+ goto err_mux_put;
+ }
+
+ ret = ps883x_enable_vregs(retimer);
+ if (ret)
+ goto err_clk_disable;
+
+ sw_desc.drvdata = retimer;
+ sw_desc.fwnode = dev_fwnode(dev);
+ sw_desc.set = ps883x_sw_set;
+
+ retimer->sw = typec_switch_register(dev, &sw_desc);
+ if (IS_ERR(retimer->sw)) {
+ ret = PTR_ERR(retimer->sw);
+ dev_err(dev, "failed to register typec switch: %d\n", ret);
+ goto err_vregs_disable;
+ }
+
+ rtmr_desc.drvdata = retimer;
+ rtmr_desc.fwnode = dev_fwnode(dev);
+ rtmr_desc.set = ps883x_retimer_set;
+
+ retimer->retimer = typec_retimer_register(dev, &rtmr_desc);
+ if (IS_ERR(retimer->retimer)) {
+ ret = PTR_ERR(retimer->retimer);
+ dev_err(dev, "failed to register typec retimer: %d\n", ret);
+ goto err_switch_unregister;
+ }
+
+ /* skip resetting if already configured */
+ if (regmap_test_bits(retimer->regmap, 0x00, BIT(0)))
+ return 0;
+
+ gpiod_direction_output(retimer->reset_gpio, 1);
+
+ /* VDD IO supply enable to reset release delay */
+ usleep_range(4000, 14000);
+
+ gpiod_set_value(retimer->reset_gpio, 0);
+
+ /* firmware initialization delay */
+ msleep(60);
+
+ return 0;
+
+err_switch_unregister:
+ typec_switch_unregister(retimer->sw);
+err_vregs_disable:
+ ps883x_disable_vregs(retimer);
+err_clk_disable:
+ clk_disable_unprepare(retimer->xo_clk);
+err_mux_put:
+ typec_mux_put(retimer->typec_mux);
+err_switch_put:
+ typec_switch_put(retimer->typec_switch);
+
+ return ret;
+}
+
+static void ps883x_retimer_remove(struct i2c_client *client)
+{
+ struct ps883x_retimer *retimer = i2c_get_clientdata(client);
+
+ typec_retimer_unregister(retimer->retimer);
+ typec_switch_unregister(retimer->sw);
+
+ gpiod_set_value(retimer->reset_gpio, 1);
+
+ regulator_disable(retimer->vddio_supply);
+ regulator_disable(retimer->vddat_supply);
+ regulator_disable(retimer->vddar_supply);
+ regulator_disable(retimer->vdd_supply);
+ regulator_disable(retimer->vdd33_cap_supply);
+ regulator_disable(retimer->vdd33_supply);
+
+ clk_disable_unprepare(retimer->xo_clk);
+
+ typec_mux_put(retimer->typec_mux);
+ typec_switch_put(retimer->typec_switch);
+}
+
+static const struct of_device_id ps883x_retimer_of_table[] = {
+ { .compatible = "parade,ps8830" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ps883x_retimer_of_table);
+
+static struct i2c_driver ps883x_retimer_driver = {
+ .driver = {
+ .name = "ps883x_retimer",
+ .of_match_table = ps883x_retimer_of_table,
+ },
+ .probe = ps883x_retimer_probe,
+ .remove = ps883x_retimer_remove,
+};
+
+module_i2c_driver(ps883x_retimer_driver);
+
+MODULE_DESCRIPTION("Parade ps883x Type-C Retimer driver");
+MODULE_LICENSE("GPL");
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer, controlled over I2C. It usually sits between a USB/DisplayPort PHY and the Type-C connector, and provides orientation and altmode handling. The boards that use this retimer are the ones featuring the Qualcomm Snapdragon X Elite SoCs. Add a driver with support for the following modes: - DisplayPort 4-lanes - DisplayPort 2-lanes + USB3 - USB3 There is another variant of this retimer which is called PS8833. It seems to be really similar to the PS8830, so future-proof this driver by naming it ps883x. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/usb/typec/mux/Kconfig | 10 + drivers/usb/typec/mux/Makefile | 1 + drivers/usb/typec/mux/ps883x.c | 422 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 433 insertions(+)