diff mbox series

[v2] docs: i2c: piix4: Add ACPI section

Message ID 20241111140231.15198-1-aladyshev22@gmail.com
State Superseded
Headers show
Series [v2] docs: i2c: piix4: Add ACPI section | expand

Commit Message

Konstantin Aladyshev Nov. 11, 2024, 2:02 p.m. UTC
Provide information how to reference I2C busses created by the PIIX4
chip driver from the ACPI code.

Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
---
 Documentation/i2c/busses/i2c-piix4.rst | 62 ++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

Comments

Andy Shevchenko Nov. 11, 2024, 2:15 p.m. UTC | #1
+Cc: Andi

On Mon, Nov 11, 2024 at 05:02:31PM +0300, Konstantin Aladyshev wrote:
> Provide information how to reference I2C busses created by the PIIX4
> chip driver from the ACPI code.

So, this is not ideal, but it's a good start so far.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We may amend this later on.

Thanks!

> Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
> ---

This place is for changelog and comments, if any. Since this is a v2 of a
standalone patch, the changelog is good to have. No need to resend now,
you can just reply to your original v2 with the missing changelog.

>  Documentation/i2c/busses/i2c-piix4.rst | 62 ++++++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
Andi Shyti Nov. 11, 2024, 10:35 p.m. UTC | #2
Hi Konstantin,

thanks for your driver, just few grammatical thoughts.

...

> +If it is not the case for your UEFI firmware and you don't have access to the source

Not a grammatical error, but it sounds a bit more linear:

/If it is not/If this is not/

> +code, you can use ACPI SSDT Overlays to provide the missing parts. Just keep in mind
> +that in this case you would need to load your extra SSDT table before the piix4 driver
> +start, i.e. you should provide SSDT via initrd or EFI variable methods and not via

/start/starts/

If you agree, I would go ahead and merge this.

Andi

> +configfs.
Bagas Sanjaya Nov. 12, 2024, 12:51 a.m. UTC | #3
On Mon, Nov 11, 2024 at 05:02:31PM +0300, Konstantin Aladyshev wrote:
> diff --git a/Documentation/i2c/busses/i2c-piix4.rst b/Documentation/i2c/busses/i2c-piix4.rst
> index 07fe6f6f4b18..90447dff7419 100644
> --- a/Documentation/i2c/busses/i2c-piix4.rst
> +++ b/Documentation/i2c/busses/i2c-piix4.rst
> @@ -109,3 +109,65 @@ which can easily get corrupted due to a state machine bug. These are mostly
>  Thinkpad laptops, but desktop systems may also be affected. We have no list
>  of all affected systems, so the only safe solution was to prevent access to
>  the SMBus on all IBM systems (detected using DMI data.)
> +
> +
> +Description in the ACPI code
> +----------------------------
> +
> +Device driver for the PIIX4 chip creates a separate I2C bus for each of its ports::
> +
> +    $ i2cdetect -l
> +    ...
> +    i2c-7   unknown         SMBus PIIX4 adapter port 0 at 0b00      N/A
> +    i2c-8   unknown         SMBus PIIX4 adapter port 2 at 0b00      N/A
> +    i2c-9   unknown         SMBus PIIX4 adapter port 1 at 0b20      N/A
> +    ...
> +
> +Therefore if you want to access one of these busses in the ACPI code, port subdevices
> +are needed to be declared inside the PIIX device::
> +
> +    Scope (\_SB_.PCI0.SMBS)
> +    {
> +        Name (_ADR, 0x00140000)
> +
> +        Device (SMB0) {
> +            Name (_ADR, 0)
> +        }
> +        Device (SMB1) {
> +            Name (_ADR, 1)
> +        }
> +        Device (SMB2) {
> +            Name (_ADR, 2)
> +        }
> +    }
> +
> +If it is not the case for your UEFI firmware and you don't have access to the source
> +code, you can use ACPI SSDT Overlays to provide the missing parts. Just keep in mind
> +that in this case you would need to load your extra SSDT table before the piix4 driver
> +start, i.e. you should provide SSDT via initrd or EFI variable methods and not via
> +configfs.
> +
> +As an example of usage here is the ACPI snippet code that would assign jc42 driver
> +to the 0x1C device on the I2C bus created by the PIIX port 0::
> +
> +    Device (JC42) {
> +        Name (_HID, "PRP0001")
> +        Name (_DDN, "JC42 Temperature sensor")
> +        Name (_CRS, ResourceTemplate () {
> +            I2cSerialBusV2 (
> +                0x001c,
> +                ControllerInitiated,
> +                100000,
> +                AddressingMode7Bit,
> +                "\\_SB.PCI0.SMBS.SMB0",
> +                0
> +            )
> +        })
> +
> +        Name (_DSD, Package () {
> +            ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> +            Package () {
> +                Package () { "compatible", Package() { "jedec,jc-42.4-temp" } },
> +            }
> +        })
> +    }

Looks good, thanks!

Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Andi Shyti Nov. 13, 2024, 10:50 p.m. UTC | #4
Hi Konstantin,

On Mon, Nov 11, 2024 at 05:02:31PM +0300, Konstantin Aladyshev wrote:
> Provide information how to reference I2C busses created by the PIIX4
> chip driver from the ACPI code.
> 
> Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>

I merged the patch into i2c/i2c-host with the changes I
suggested and I also wrapped the lines to 80 characters to keep a
uniform style throughout the doc file.

Andi
Konstantin Aladyshev Nov. 14, 2024, 8:01 a.m. UTC | #5
Hi Andi!

Sorry, I just didn't have time to fix it yesterday. Of course I don't
mind your changes. Thanks for the help!

Best regards,
Konstantin Aladyshev

On Thu, Nov 14, 2024 at 1:50 AM Andi Shyti <andi.shyti@kernel.org> wrote:
>
> Hi Konstantin,
>
> On Mon, Nov 11, 2024 at 05:02:31PM +0300, Konstantin Aladyshev wrote:
> > Provide information how to reference I2C busses created by the PIIX4
> > chip driver from the ACPI code.
> >
> > Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
>
> I merged the patch into i2c/i2c-host with the changes I
> suggested and I also wrapped the lines to 80 characters to keep a
> uniform style throughout the doc file.
>
> Andi
diff mbox series

Patch

diff --git a/Documentation/i2c/busses/i2c-piix4.rst b/Documentation/i2c/busses/i2c-piix4.rst
index 07fe6f6f4b18..90447dff7419 100644
--- a/Documentation/i2c/busses/i2c-piix4.rst
+++ b/Documentation/i2c/busses/i2c-piix4.rst
@@ -109,3 +109,65 @@  which can easily get corrupted due to a state machine bug. These are mostly
 Thinkpad laptops, but desktop systems may also be affected. We have no list
 of all affected systems, so the only safe solution was to prevent access to
 the SMBus on all IBM systems (detected using DMI data.)
+
+
+Description in the ACPI code
+----------------------------
+
+Device driver for the PIIX4 chip creates a separate I2C bus for each of its ports::
+
+    $ i2cdetect -l
+    ...
+    i2c-7   unknown         SMBus PIIX4 adapter port 0 at 0b00      N/A
+    i2c-8   unknown         SMBus PIIX4 adapter port 2 at 0b00      N/A
+    i2c-9   unknown         SMBus PIIX4 adapter port 1 at 0b20      N/A
+    ...
+
+Therefore if you want to access one of these busses in the ACPI code, port subdevices
+are needed to be declared inside the PIIX device::
+
+    Scope (\_SB_.PCI0.SMBS)
+    {
+        Name (_ADR, 0x00140000)
+
+        Device (SMB0) {
+            Name (_ADR, 0)
+        }
+        Device (SMB1) {
+            Name (_ADR, 1)
+        }
+        Device (SMB2) {
+            Name (_ADR, 2)
+        }
+    }
+
+If it is not the case for your UEFI firmware and you don't have access to the source
+code, you can use ACPI SSDT Overlays to provide the missing parts. Just keep in mind
+that in this case you would need to load your extra SSDT table before the piix4 driver
+start, i.e. you should provide SSDT via initrd or EFI variable methods and not via
+configfs.
+
+As an example of usage here is the ACPI snippet code that would assign jc42 driver
+to the 0x1C device on the I2C bus created by the PIIX port 0::
+
+    Device (JC42) {
+        Name (_HID, "PRP0001")
+        Name (_DDN, "JC42 Temperature sensor")
+        Name (_CRS, ResourceTemplate () {
+            I2cSerialBusV2 (
+                0x001c,
+                ControllerInitiated,
+                100000,
+                AddressingMode7Bit,
+                "\\_SB.PCI0.SMBS.SMB0",
+                0
+            )
+        })
+
+        Name (_DSD, Package () {
+            ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+            Package () {
+                Package () { "compatible", Package() { "jedec,jc-42.4-temp" } },
+            }
+        })
+    }