mbox series

[0/5] Add support for MBG Thermal monitoring device

Message ID 20240712-mbg-tm-support-v1-0-7d78bec920ca@quicinc.com
Headers show
Series Add support for MBG Thermal monitoring device | expand

Message

Satya Priya Kakitapalli July 12, 2024, 12:43 p.m. UTC
Add bindings, driver and DT for the Qualcomm's MBG thermal
monitoring device.

Please note that this series is dependent on [1] which adds
ADC5-GEN3 support.

[1] https://lore.kernel.org/linux-iio/20231231171237.3322376-1-quic_jprakash@quicinc.com/

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
---
Satya Priya Kakitapalli (5):
      dt-bindings: iio: adc: Add ADC5 GEN3 Channel info for pm8775 PMIC
      dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
      thermal: qcom: Add support for MBG Temp monitor
      ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P
      ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P

 .../bindings/thermal/qcom-spmi-mbg-tm.yaml         |  63 +++++
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi        | 210 ++++++++++++++++
 drivers/thermal/qcom/Kconfig                       |  11 +
 drivers/thermal/qcom/Makefile                      |   1 +
 drivers/thermal/qcom/qcom-spmi-mbg-tm.c            | 269 +++++++++++++++++++++
 .../iio/adc/qcom,spmi-adc5-gen3-pm8775.h           |  42 ++++
 6 files changed, 596 insertions(+)
---
base-commit: c27723304c1f6af79f7bece5edacace6a8d46167
change-id: 20240627-mbg-tm-support-7bbf25c246e1

Best regards,

Comments

Satya Priya Kakitapalli Nov. 19, 2024, 8:06 a.m. UTC | #1
On 7/12/2024 8:09 PM, neil.armstrong@linaro.org wrote:
> Hi,
>
> On 12/07/2024 14:43, Satya Priya Kakitapalli wrote:
>> Add bindings, driver and DT for the Qualcomm's MBG thermal
>> monitoring device.
>>
>> Please note that this series is dependent on [1] which adds
>> ADC5-GEN3 support.
>>
>> [1] 
>> https://lore.kernel.org/linux-iio/20231231171237.3322376-1-quic_jprakash@quicinc.com/
>
> Since this dependency was sent almost 7 months ago, and had plenty of 
> changes requests,
> this patchset should've been either delayed until a proper support of 
> ADC5-GEN3
> was accepted or marked as RFC.
>

Sure, I'll re-base my patches on the recently posted version of 
ADC5-GEN3 patches and post my V2 as RFC.


>>
>> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
>> ---
>> Satya Priya Kakitapalli (5):
>>        dt-bindings: iio: adc: Add ADC5 GEN3 Channel info for pm8775 PMIC
>>        dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
>>        thermal: qcom: Add support for MBG Temp monitor
>>        ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P
>>        ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P
>
> Those should be: "arm64: dts: qcom: sa8775p-pmics: ..."
>

Okay.


>>
>>   .../bindings/thermal/qcom-spmi-mbg-tm.yaml         |  63 +++++
>>   arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi        | 210 
>> ++++++++++++++++
>>   drivers/thermal/qcom/Kconfig                       |  11 +
>>   drivers/thermal/qcom/Makefile                      |   1 +
>>   drivers/thermal/qcom/qcom-spmi-mbg-tm.c            | 269 
>> +++++++++++++++++++++
>>   .../iio/adc/qcom,spmi-adc5-gen3-pm8775.h           |  42 ++++
>>   6 files changed, 596 insertions(+)
>> ---
>> base-commit: c27723304c1f6af79f7bece5edacace6a8d46167
>> change-id: 20240627-mbg-tm-support-7bbf25c246e1
>>
>> Best regards,
>
> Neil
>