mbox series

[0/4] gpio-tqmx86: cleanup + changing directions

Message ID cover.1733739697.git.matthias.schiffer@ew.tq-group.com
Headers show
Series gpio-tqmx86: cleanup + changing directions | expand

Message

Matthias Schiffer Dec. 9, 2024, 10:36 a.m. UTC
This is the first of two series adding new features to the gpio-tqmx86
driver. The first 3 patches are cleanup/preparation and the last patch
adds support for changing the directions of GPIOs.

Once this is merged, the final series will add support for new TQMx86
variants (SMARC and COM-HPC) that feature up to 14 GPIOs and full IRQ
support on all lines.


Matthias Schiffer (4):
  gpio: tqmx86: add macros for interrupt configuration
  gpio: tqmx86: consistently refer to IRQs by hwirq numbers
  gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper
  gpio: tqmx86: add support for changing GPIO directions

 drivers/gpio/gpio-tqmx86.c | 135 +++++++++++++++++++++++--------------
 1 file changed, 84 insertions(+), 51 deletions(-)

Comments

Bartosz Golaszewski Dec. 11, 2024, 3:12 p.m. UTC | #1
On Mon, Dec 9, 2024 at 11:36 AM Matthias Schiffer
<matthias.schiffer@ew.tq-group.com> wrote:
>
> This is the first of two series adding new features to the gpio-tqmx86
> driver. The first 3 patches are cleanup/preparation and the last patch
> adds support for changing the directions of GPIOs.
>
> Once this is merged, the final series will add support for new TQMx86
> variants (SMARC and COM-HPC) that feature up to 14 GPIOs and full IRQ
> support on all lines.
>

It's not like this series is very big, what stops you from posting the
entire thing right away? It would probably add more context to this
series.

Bart

>
> Matthias Schiffer (4):
>   gpio: tqmx86: add macros for interrupt configuration
>   gpio: tqmx86: consistently refer to IRQs by hwirq numbers
>   gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper
>   gpio: tqmx86: add support for changing GPIO directions
>
>  drivers/gpio/gpio-tqmx86.c | 135 +++++++++++++++++++++++--------------
>  1 file changed, 84 insertions(+), 51 deletions(-)
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
>
Matthias Schiffer Dec. 11, 2024, 3:35 p.m. UTC | #2
On Wed, 2024-12-11 at 16:12 +0100, Bartosz Golaszewski wrote:
> 
> On Mon, Dec 9, 2024 at 11:36 AM Matthias Schiffer
> <matthias.schiffer@ew.tq-group.com> wrote:
> > 
> > This is the first of two series adding new features to the gpio-tqmx86
> > driver. The first 3 patches are cleanup/preparation and the last patch
> > adds support for changing the directions of GPIOs.
> > 
> > Once this is merged, the final series will add support for new TQMx86
> > variants (SMARC and COM-HPC) that feature up to 14 GPIOs and full IRQ
> > support on all lines.
> > 
> 
> It's not like this series is very big, what stops you from posting the
> entire thing right away? It would probably add more context to this
> series.
> 
> Bart

The second series is bigger and involves both the GPIO and MFD drivers. I kinda
expect a few rounds of reviews to be needed before it gets accepted, so my
intention was to get these smaller, more obvious patches out of the way first.

Best regards,
Matthias



> 
> > 
> > Matthias Schiffer (4):
> >   gpio: tqmx86: add macros for interrupt configuration
> >   gpio: tqmx86: consistently refer to IRQs by hwirq numbers
> >   gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper
> >   gpio: tqmx86: add support for changing GPIO directions
> > 
> >  drivers/gpio/gpio-tqmx86.c | 135 +++++++++++++++++++++++--------------
> >  1 file changed, 84 insertions(+), 51 deletions(-)
> > 
> > --
> > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> > Amtsgericht München, HRB 105018
> > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> > https://www.tq-group.com/
> >
Bartosz Golaszewski Dec. 11, 2024, 3:47 p.m. UTC | #3
On Wed, Dec 11, 2024 at 4:35 PM Matthias Schiffer
<matthias.schiffer@ew.tq-group.com> wrote:
>
> On Wed, 2024-12-11 at 16:12 +0100, Bartosz Golaszewski wrote:
> >
> > On Mon, Dec 9, 2024 at 11:36 AM Matthias Schiffer
> > <matthias.schiffer@ew.tq-group.com> wrote:
> > >
> > > This is the first of two series adding new features to the gpio-tqmx86
> > > driver. The first 3 patches are cleanup/preparation and the last patch
> > > adds support for changing the directions of GPIOs.
> > >
> > > Once this is merged, the final series will add support for new TQMx86
> > > variants (SMARC and COM-HPC) that feature up to 14 GPIOs and full IRQ
> > > support on all lines.
> > >
> >
> > It's not like this series is very big, what stops you from posting the
> > entire thing right away? It would probably add more context to this
> > series.
> >
> > Bart
>
> The second series is bigger and involves both the GPIO and MFD drivers. I kinda
> expect a few rounds of reviews to be needed before it gets accepted, so my
> intention was to get these smaller, more obvious patches out of the way first.
>
> Best regards,
> Matthias

Fair enough. Could you address the nits I pointed out? I'll queue these then.

Bart