diff mbox series

[12/16] dt-bindings: media: camss: Add qcom,sm8550-camss binding

Message ID 20241225133523.4034820-13-quic_depengs@quicinc.com
State New
Headers show
Series media: qcom: camss: Add sm8550 support | expand

Commit Message

Depeng Shao Dec. 25, 2024, 1:35 p.m. UTC 
Add bindings for qcom,sm8550-camss in order to support the camera
subsystem for sm8550.

Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
---
 .../bindings/media/qcom,sm8550-camss.yaml     | 597 ++++++++++++++++++
 1 file changed, 597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml

Comments

Depeng Shao Jan. 4, 2025, 1:40 p.m. UTC | #1 
Hi Krzysztof,

On 12/27/2024 5:10 PM, Krzysztof Kozlowski wrote:
> On Wed, Dec 25, 2024 at 07:05:19PM +0530, Depeng Shao wrote:
>> Add bindings for qcom,sm8550-camss in order to support the camera
>> subsystem for sm8550.
>>
>> Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
>> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
>> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
>> ---
> 
> Is this v7 or v1? Same issue was all the time in the past, so why can't
> you finally fix it?
> 
> Look:
> 
> $ b4 diff 20241225133523.4034820-13-quic_depengs@quicinc.com
> Breaking thread to remove parents of 20241225133523.4034820-1-quic_depengs@quicinc.com
> Checking for older revisions
> Grabbing search results from lore.kernel.org
>    Added from v6: 1 patches
> ---
> Analyzing 217 messages in the thread
> Could not find lower series to compare against.
> 
> I am not going to perform review, maybe other maintaners have spare
> time to deal with this submission process.

Really sorry, I made a foolish mistake. I didn't realize that the patch 
subject was missing the version number, which might be why the b4 diff 
couldn't detect the old series. Thank you for pointing out this error. 
Could you please advise whether I should resend v7 or fix it in next 
version series?

I have also found a workaround to replace "b4 diff". Last time, you 
helped by giving a RB tag on the version 4 dt-binding. You can check the 
differences[1] between version 4 and version 7 on the Patchew website. 
If possible, could you please help review the diff provided by Patchew 
once again? Sorry for wasting your time.

Visit below website[1], then search "dt-bindings: media: camss: Add 
qcom,sm8550-camss binding", then we can get the difference between 
version4 and version7.


[1] 
https://patchew.org/linux/20240812144131.369378-1-quic._5Fdepengs@quicinc.com/diff/20241225133523.4034820-1-quic._5Fdepengs@quicinc.com/


Thanks,
Depeng
Hans Verkuil Jan. 6, 2025, 2 p.m. UTC | #2 
On 04/01/2025 14:40, Depeng Shao wrote:
> Hi Krzysztof,
> 
> On 12/27/2024 5:10 PM, Krzysztof Kozlowski wrote:
>> On Wed, Dec 25, 2024 at 07:05:19PM +0530, Depeng Shao wrote:
>>> Add bindings for qcom,sm8550-camss in order to support the camera
>>> subsystem for sm8550.
>>>
>>> Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
>>> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
>>> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
>>> ---
>>
>> Is this v7 or v1? Same issue was all the time in the past, so why can't
>> you finally fix it?
>>
>> Look:
>>
>> $ b4 diff 20241225133523.4034820-13-quic_depengs@quicinc.com
>> Breaking thread to remove parents of 20241225133523.4034820-1-quic_depengs@quicinc.com
>> Checking for older revisions
>> Grabbing search results from lore.kernel.org
>>    Added from v6: 1 patches
>> ---
>> Analyzing 217 messages in the thread
>> Could not find lower series to compare against.
>>
>> I am not going to perform review, maybe other maintaners have spare
>> time to deal with this submission process.
> 
> Really sorry, I made a foolish mistake. I didn't realize that the patch 
> subject was missing the version number, which might be why the b4 diff 
> couldn't detect the old series. Thank you for pointing out this error. 
> Could you please advise whether I should resend v7 or fix it in next 
> version series?

I marked this series as 'Changes Requested' in our media patchwork because
of this issue.

So resend it as v8 with the proper [PATCH v8 ...] subject.

It's a nightmare for maintainers/reviewers if it isn't clear if a patch series
supersedes a previous series, so it is important that you do this right.

Regards,

	Hans

> 
> I have also found a workaround to replace "b4 diff". Last time, you 
> helped by giving a RB tag on the version 4 dt-binding. You can check the 
> differences[1] between version 4 and version 7 on the Patchew website. 
> If possible, could you please help review the diff provided by Patchew 
> once again? Sorry for wasting your time.
> 
> Visit below website[1], then search "dt-bindings: media: camss: Add 
> qcom,sm8550-camss binding", then we can get the difference between 
> version4 and version7.
> 
> 
> [1] 
> https://patchew.org/linux/20240812144131.369378-1-quic._5Fdepengs@quicinc.com/diff/20241225133523.4034820-1-quic._5Fdepengs@quicinc.com/
> 
> 
> Thanks,
> Depeng
>
Depeng Shao Jan. 7, 2025, 12:47 p.m. UTC | #3 
Hi Hans,

On 1/6/2025 10:00 PM, Hans Verkuil wrote:
> On 04/01/2025 14:40, Depeng Shao wrote:
>> Hi Krzysztof,
>>
>> On 12/27/2024 5:10 PM, Krzysztof Kozlowski wrote:
>>> On Wed, Dec 25, 2024 at 07:05:19PM +0530, Depeng Shao wrote:
>>>> Add bindings for qcom,sm8550-camss in order to support the camera
>>>> subsystem for sm8550.
>>>>
>>>> Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
>>>> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
>>>> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
>>>> ---
>>>
>>> Is this v7 or v1? Same issue was all the time in the past, so why can't
>>> you finally fix it?
>>>
>>> Look:
>>>
>>> $ b4 diff 20241225133523.4034820-13-quic_depengs@quicinc.com
>>> Breaking thread to remove parents of 20241225133523.4034820-1-quic_depengs@quicinc.com
>>> Checking for older revisions
>>> Grabbing search results from lore.kernel.org
>>>     Added from v6: 1 patches
>>> ---
>>> Analyzing 217 messages in the thread
>>> Could not find lower series to compare against.
>>>
>>> I am not going to perform review, maybe other maintaners have spare
>>> time to deal with this submission process.
>>
>> Really sorry, I made a foolish mistake. I didn't realize that the patch
>> subject was missing the version number, which might be why the b4 diff
>> couldn't detect the old series. Thank you for pointing out this error.
>> Could you please advise whether I should resend v7 or fix it in next
>> version series?
> 
> I marked this series as 'Changes Requested' in our media patchwork because
> of this issue.
> 
> So resend it as v8 with the proper [PATCH v8 ...] subject.
> 

Thanks for the comments, I will follow your guidance to resend it.

> It's a nightmare for maintainers/reviewers if it isn't clear if a patch series
> supersedes a previous series, so it is important that you do this right.
> 
> Regards,
> 
> 	Hans
> 
>>
>> I have also found a workaround to replace "b4 diff". Last time, you
>> helped by giving a RB tag on the version 4 dt-binding. You can check the
>> differences[1] between version 4 and version 7 on the Patchew website.
>> If possible, could you please help review the diff provided by Patchew
>> once again? Sorry for wasting your time.
>>
>> Visit below website[1], then search "dt-bindings: media: camss: Add
>> qcom,sm8550-camss binding", then we can get the difference between
>> version4 and version7.
>>
>>
>> [1]
>> https://patchew.org/linux/20240812144131.369378-1-quic._5Fdepengs@quicinc.com/diff/20241225133523.4034820-1-quic._5Fdepengs@quicinc.com/
>>
>>


Thanks,
Depeng
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
new file mode 100644
index 000000000000..cd34f14916b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
@@ -0,0 +1,597 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8550-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Depeng Shao <quic_depengs@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8550-camss
+
+  reg:
+    maxItems: 19
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_wrapper
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cpas_fast_ahb_clk
+      - const: cpas_ife_lite
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe2
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: csiphy6
+      - const: csiphy6_timer
+      - const: csiphy7
+      - const: csiphy7_timer
+      - const: csiphy_rx
+      - const: gcc_axi_hf
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe2
+      - const: vfe2_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 18
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0_mnoc
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI4.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI5.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@6:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI6.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@7:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI7.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8550-camcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@acb7000 {
+            compatible = "qcom,sm8550-camss";
+
+            reg = <0 0x0acb7000 0 0xd00>,
+                  <0 0x0acb9000 0 0xd00>,
+                  <0 0x0acbb000 0 0xd00>,
+                  <0 0x0acca000 0 0xa00>,
+                  <0 0x0acce000 0 0xa00>,
+                  <0 0x0acb6000 0 0x1000>,
+                  <0 0x0ace4000 0 0x2000>,
+                  <0 0x0ace6000 0 0x2000>,
+                  <0 0x0ace8000 0 0x2000>,
+                  <0 0x0acea000 0 0x2000>,
+                  <0 0x0acec000 0 0x2000>,
+                  <0 0x0acee000 0 0x2000>,
+                  <0 0x0acf0000 0 0x2000>,
+                  <0 0x0acf2000 0 0x2000>,
+                  <0 0x0ac62000 0 0xf000>,
+                  <0 0x0ac71000 0 0xf000>,
+                  <0 0x0ac80000 0 0xf000>,
+                  <0 0x0accb000 0 0x1800>,
+                  <0 0x0accf000 0 0x1800>;
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_wrapper",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "csiphy6",
+                        "csiphy7",
+                        "vfe0",
+                        "vfe1",
+                        "vfe2",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY6_CLK>,
+                     <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY7_CLK>,
+                     <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_2_CLK>,
+                     <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cpas_fast_ahb_clk",
+                          "cpas_ife_lite",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe2",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "csiphy6",
+                          "csiphy6_timer",
+                          "csiphy7",
+                          "csiphy7_timer",
+                          "csiphy_rx",
+                          "gcc_axi_hf",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe2",
+                          "vfe2_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csiphy6",
+                              "csiphy7",
+                              "vfe0",
+                              "vfe1",
+                              "vfe2",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+            interconnect-names = "ahb",
+                                 "hf_0_mnoc";
+
+            iommus = <&apps_smmu 0x800 0x20>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_IFE_2_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1e_0p88>;
+            vdda-pll-supply = <&vreg_l3e_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint@0 {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };