| Message ID | 20250313130918.4238-2-quic_kaushalk@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Enable QPIC BAM and QPIC NAND support for SDX75 | expand |
On Thu, 13 Mar 2025 18:39:13 +0530, Kaushal Kumar wrote: > Document the QPIC NAND controller v2.1.1 being used in > SDX75 SoC and it uses BAM DMA. > > SDX75 NAND controller has DMA-coherent and iommu support > so define them in the properties section, without which > 'dtbs_check' reports the following error: > > nand-controller@1cc8000: Unevaluated properties are not > allowed ('dma-coherent', 'iommus' were unexpected) > > Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com> > --- > .../devicetree/bindings/mtd/qcom,nandc.yaml | 23 ++++++++++++++----- > 1 file changed, 17 insertions(+), 6 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml: properties:compatible: 'anyOf' conditional failed, one must be fixed: 'OneOf' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'dependentRequired', 'dependentSchemas', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'typeSize', 'unevaluatedProperties', 'uniqueItems'] 'type' was expected from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml: properties:compatible: Additional properties are not allowed ('OneOf' was unexpected) from schema $id: http://devicetree.org/meta-schemas/string-array.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250313130918.4238-2-quic_kaushalk@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 35b4206ea918..8b77e8837205 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -11,12 +11,17 @@ maintainers: properties: compatible: - enum: - - qcom,ipq806x-nand - - qcom,ipq4019-nand - - qcom,ipq6018-nand - - qcom,ipq8074-nand - - qcom,sdx55-nand + OneOf: + - items: + - enum: + - qcom,sdx75-nand + - const: qcom,sdx55-nand + - items: + - const: qcom,ipq806x-nand + - const: qcom,ipq4019-nand + - const: qcom,ipq6018-nand + - const: qcom,ipq8074-nand + - const: qcom,sdx55-nand reg: maxItems: 1 @@ -31,6 +36,12 @@ properties: - const: core - const: aon + dma-coherent: true + + iommus: + minItems: 1 + maxItems: 3 + qcom,cmd-crci: $ref: /schemas/types.yaml#/definitions/uint32 description:
Document the QPIC NAND controller v2.1.1 being used in SDX75 SoC and it uses BAM DMA. SDX75 NAND controller has DMA-coherent and iommu support so define them in the properties section, without which 'dtbs_check' reports the following error: nand-controller@1cc8000: Unevaluated properties are not allowed ('dma-coherent', 'iommus' were unexpected) Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com> --- .../devicetree/bindings/mtd/qcom,nandc.yaml | 23 ++++++++++++++----- 1 file changed, 17 insertions(+), 6 deletions(-)