diff mbox series

[14/15] arm64: dts: renesas: Add initial device tree for RZ/V2N EVK

Message ID 20250326143945.82142-15-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series Add support for Renesas RZ/V2N SoC and EVK | expand

Commit Message

Prabhakar March 26, 2025, 2:39 p.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add the initial device tree for the Renesas RZ/V2N EVK board, based on
the R9A09G056N48 SoC. Enable basic board functionality, including:

- Memory mapping (reserve the first 128MB for the secure area)
- Clock inputs (QEXTAL, RTXIN, AUDIO_EXTAL)
- PINCTRL configurations for peripherals
- Serial console (SCIF)
- SDHI1 with power control and UHS modes

Update the Makefile to include the new DTB.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/Makefile          |   2 +
 .../dts/renesas/r9a09g056n48-rzv2n-evk.dts    | 115 ++++++++++++++++++
 2 files changed, 117 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts

Comments

Prabhakar March 28, 2025, 3:06 p.m. UTC | #1 
Hi Krzysztof,

Thank you for the review.

On Thu, Mar 27, 2025 at 7:44 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 26/03/2025 15:39, Prabhakar wrote:
> > +
> > +     sd1-pwr-en-hog {
> > +             gpio-hog;
> > +             gpios = <RZV2N_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
> > +             output-high;
> > +             line-name = "sd1_pwr_en";
> > +     };
> > +
> > +     sdhi1_pins: sd1 {
> > +             sd1_dat_cmd {
> Follow DTS coding style.
>
Sure, I will do that.

Cheers,
Prabhakar
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d25e665ee4bf..d8a8d7ca4c58 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -152,6 +152,8 @@  dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb
 
+dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk.dtb
+
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
 
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
new file mode 100644
index 000000000000..aee4748a7618
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
@@ -0,0 +1,115 @@ 
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2N EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/renesas,r9a09g056-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g056.dtsi"
+
+/ {
+	model = "Renesas RZ/V2N EVK Board based on r9a09g056n48";
+	compatible = "renesas,rzv2n-evk", "renesas,r9a09g056n48", "renesas,r9a09g056";
+
+	aliases {
+		mmc1 = &sdhi1;
+		serial0 = &scif;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x1 0xf8000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vqmmc_sdhi1: regulator-vqmmc-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VqmmC";
+		gpios = <&pinctrl RZV2N_GPIO(A, 2) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&audio_extal_clk {
+	clock-frequency = <22579200>;
+};
+
+&pinctrl {
+	scif_pins: scif {
+		pins = "SCIF_TXD", "SCIF_RXD";
+		renesas,output-impedance = <1>;
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZV2N_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_dat_cmd {
+			pins = "SD1DAT0", "SD1DAT1", "SD1DAT2", "SD1DAT3", "SD1CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd1_clk {
+			pins = "SD1CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd1_cd {
+			pinmux = <RZV2N_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+		};
+	};
+};
+
+&qextal_clk {
+	clock-frequency = <24000000>;
+};
+
+&rtxin_clk {
+	clock-frequency = <32768>;
+};
+
+&scif {
+	pinctrl-0 = <&scif_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};