diff mbox

Applied "ASoC: Intel: Add Broxton-P machine driver" to the asoc tree

Message ID E1b0CiS-00073V-PE@debutante
State New
Headers show

Commit Message

Mark Brown May 10, 2016, 6:49 p.m. UTC
The patch

   ASoC: Intel: Add Broxton-P machine driver

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 76016322ec5670052fdabb08c586d6b16bd5062f Mon Sep 17 00:00:00 2001
From: Ramesh Babu <ramesh.babu@intel.com>

Date: Tue, 10 May 2016 22:02:06 +0530
Subject: [PATCH] ASoC: Intel: Add Broxton-P machine driver

This patch adds the Broxton-P machine driver for Intel Broxton-P
reference boards. This machine uses the RT298 codec

Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>

Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>

Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Signed-off-by: Mark Brown <broonie@kernel.org>

---
 sound/soc/intel/Kconfig            |  15 ++
 sound/soc/intel/boards/Makefile    |   2 +
 sound/soc/intel/boards/bxt_rt298.c | 353 +++++++++++++++++++++++++++++++++++++
 3 files changed, 370 insertions(+)
 create mode 100644 sound/soc/intel/boards/bxt_rt298.c

-- 
2.8.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
diff mbox

Patch

diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 399afa118822..91c15abb625e 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -58,6 +58,21 @@  config SND_SOC_INTEL_HASWELL_MACH
 	  Say Y if you have such a device
 	  If unsure select "N".
 
+config SND_SOC_INTEL_BXT_RT298_MACH
+	tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
+	depends on X86 && ACPI && I2C
+	select SND_SOC_INTEL_SST
+	select SND_SOC_INTEL_SKYLAKE
+	select SND_SOC_RT298
+	select SND_SOC_DMIC
+	select SND_SOC_HDAC_HDMI
+	select SND_HDA_DSP_LOADER
+	help
+	   This adds support for ASoC machine driver for Broxton platforms
+	   with RT286 I2S audio codec.
+	   Say Y if you have such a device
+	   If unsure select "N".
+
 config SND_SOC_INTEL_BYT_RT5640_MACH
 	tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
 	depends on X86_INTEL_LPSS && I2C
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 3310c0f9c356..a8506774f510 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -2,6 +2,7 @@  snd-soc-sst-haswell-objs := haswell.o
 snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o
 snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o
 snd-soc-sst-broadwell-objs := broadwell.o
+snd-soc-sst-bxt-rt298-objs := bxt_rt298.o
 snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o
 snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o
 snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
@@ -14,6 +15,7 @@  snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o
 obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
+obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o
 obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o
 obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o
 obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
new file mode 100644
index 000000000000..1b845ff779f3
--- /dev/null
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -0,0 +1,353 @@ 
+/*
+ * Intel Broxton-P I2S Machine Driver
+ *
+ * Copyright (C) 2014-2016, Intel Corporation. All rights reserved.
+ *
+ * Modified from:
+ *   Intel Skylake I2S Machine driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/pcm_params.h>
+#include "../../codecs/hdac_hdmi.h"
+#include "../../codecs/rt298.h"
+
+static struct snd_soc_jack broxton_headset;
+/* Headset jack detection DAPM pins */
+
+enum {
+	BXT_DPCM_AUDIO_PB = 0,
+	BXT_DPCM_AUDIO_CP,
+	BXT_DPCM_AUDIO_REF_CP,
+	BXT_DPCM_AUDIO_HDMI1_PB,
+	BXT_DPCM_AUDIO_HDMI2_PB,
+	BXT_DPCM_AUDIO_HDMI3_PB,
+};
+
+static struct snd_soc_jack_pin broxton_headset_pins[] = {
+	{
+		.pin = "Mic Jack",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
+static const struct snd_kcontrol_new broxton_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Mic Jack"),
+};
+
+static const struct snd_soc_dapm_widget broxton_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_MIC("DMIC2", NULL),
+	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
+	SND_SOC_DAPM_SPK("HDMI1", NULL),
+	SND_SOC_DAPM_SPK("HDMI2", NULL),
+	SND_SOC_DAPM_SPK("HDMI3", NULL),
+};
+
+static const struct snd_soc_dapm_route broxton_rt298_map[] = {
+	/* speaker */
+	{"Speaker", NULL, "SPOR"},
+	{"Speaker", NULL, "SPOL"},
+
+	/* HP jack connectors - unknown if we have jack detect */
+	{"Headphone Jack", NULL, "HPO Pin"},
+
+	/* other jacks */
+	{"MIC1", NULL, "Mic Jack"},
+
+	/* digital mics */
+	{"DMIC1 Pin", NULL, "DMIC2"},
+	{"DMic", NULL, "SoC DMIC"},
+
+	{"HDMI1", NULL, "hif5 Output"},
+	{"HDMI2", NULL, "hif6 Output"},
+	{"HDMI3", NULL, "hif7 Output"},
+
+	/* CODEC BE connections */
+	{ "AIF1 Playback", NULL, "ssp5 Tx"},
+	{ "ssp5 Tx", NULL, "codec0_out"},
+
+	{ "codec0_in", NULL, "ssp5 Rx" },
+	{ "ssp5 Rx", NULL, "AIF1 Capture" },
+
+	{ "dmic01_hifi", NULL, "DMIC01 Rx" },
+	{ "DMIC01 Rx", NULL, "Capture" },
+
+	{ "hifi3", NULL, "iDisp3 Tx"},
+	{ "iDisp3 Tx", NULL, "iDisp3_out"},
+	{ "hifi2", NULL, "iDisp2 Tx"},
+	{ "iDisp2 Tx", NULL, "iDisp2_out"},
+	{ "hifi1", NULL, "iDisp1 Tx"},
+	{ "iDisp1 Tx", NULL, "iDisp1_out"},
+
+};
+
+static int broxton_rt298_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int ret = 0;
+
+	ret = snd_soc_card_jack_new(rtd->card, "Headset",
+		SND_JACK_HEADSET | SND_JACK_BTN_0,
+		&broxton_headset,
+		broxton_headset_pins, ARRAY_SIZE(broxton_headset_pins));
+
+	if (ret)
+		return ret;
+
+	rt298_mic_detect(codec, &broxton_headset);
+	return 0;
+}
+
+static int broxton_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_dai *dai = rtd->codec_dai;
+
+	return hdac_hdmi_jack_init(dai, BXT_DPCM_AUDIO_HDMI1_PB + dai->id);
+}
+
+static int broxton_ssp5_fixup(struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+
+	/* The ADSP will covert the FE rate to 48k, stereo */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = 2;
+
+	/* set SSP5 to 24 bit */
+	snd_mask_none(fmt);
+	snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE);
+
+	return 0;
+}
+
+static int broxton_rt298_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT298_SCLK_S_PLL,
+					19200000, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec sysclk configuration\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct snd_soc_ops broxton_rt298_ops = {
+	.hw_params = broxton_rt298_hw_params,
+};
+
+/* broxton digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link broxton_rt298_dais[] = {
+	/* Front End DAI links */
+	[BXT_DPCM_AUDIO_PB]
+	{
+		.name = "Bxt Audio Port",
+		.stream_name = "Audio",
+		.cpu_dai_name = "System Pin",
+		.platform_name = "0000:00:0e.0",
+		.nonatomic = 1,
+		.dynamic = 1,
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_playback = 1,
+	},
+	[BXT_DPCM_AUDIO_CP]
+	{
+		.name = "Bxt Audio Capture Port",
+		.stream_name = "Audio Record",
+		.cpu_dai_name = "System Pin",
+		.platform_name = "0000:00:0e.0",
+		.nonatomic = 1,
+		.dynamic = 1,
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_capture = 1,
+	},
+	[BXT_DPCM_AUDIO_REF_CP]
+	{
+		.name = "Bxt Audio Reference cap",
+		.stream_name = "refcap",
+		.cpu_dai_name = "Reference Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:0e.0",
+		.init = NULL,
+		.dpcm_capture = 1,
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+	[BXT_DPCM_AUDIO_HDMI1_PB]
+	{
+		.name = "Bxt HDMI Port1",
+		.stream_name = "Hdmi1",
+		.cpu_dai_name = "HDMI1 Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:0e.0",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+	[BXT_DPCM_AUDIO_HDMI2_PB]
+	{
+		.name = "Bxt HDMI Port2",
+		.stream_name = "Hdmi2",
+		.cpu_dai_name = "HDMI2 Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:0e.0",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+	[BXT_DPCM_AUDIO_HDMI3_PB]
+	{
+		.name = "Bxt HDMI Port3",
+		.stream_name = "Hdmi3",
+		.cpu_dai_name = "HDMI3 Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:0e.0",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+	/* Back End DAI links */
+	{
+		/* SSP5 - Codec */
+		.name = "SSP5-Codec",
+		.be_id = 0,
+		.cpu_dai_name = "SSP5 Pin",
+		.platform_name = "0000:00:0e.0",
+		.no_pcm = 1,
+		.codec_name = "i2c-INT343A:00",
+		.codec_dai_name = "rt298-aif1",
+		.init = broxton_rt298_codec_init,
+		.dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF |
+						SND_SOC_DAIFMT_CBS_CFS,
+		.ignore_pmdown_time = 1,
+		.be_hw_params_fixup = broxton_ssp5_fixup,
+		.ops = &broxton_rt298_ops,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+	},
+	{
+		.name = "dmic01",
+		.be_id = 1,
+		.cpu_dai_name = "DMIC01 Pin",
+		.codec_name = "dmic-codec",
+		.codec_dai_name = "dmic-hifi",
+		.platform_name = "0000:00:0e.0",
+		.ignore_suspend = 1,
+		.dpcm_capture = 1,
+		.no_pcm = 1,
+	},
+	{
+		.name = "iDisp1",
+		.be_id = 3,
+		.cpu_dai_name = "iDisp1 Pin",
+		.codec_name = "ehdaudio0D2",
+		.codec_dai_name = "intel-hdmi-hifi1",
+		.platform_name = "0000:00:0e.0",
+		.init = broxton_hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+	},
+	{
+		.name = "iDisp2",
+		.be_id = 4,
+		.cpu_dai_name = "iDisp2 Pin",
+		.codec_name = "ehdaudio0D2",
+		.codec_dai_name = "intel-hdmi-hifi2",
+		.platform_name = "0000:00:0e.0",
+		.init = broxton_hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+	},
+	{
+		.name = "iDisp3",
+		.be_id = 5,
+		.cpu_dai_name = "iDisp3 Pin",
+		.codec_name = "ehdaudio0D2",
+		.codec_dai_name = "intel-hdmi-hifi3",
+		.platform_name = "0000:00:0e.0",
+		.init = broxton_hdmi_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+	},
+};
+
+/* broxton audio machine driver for SPT + RT298S */
+static struct snd_soc_card broxton_rt298 = {
+	.name = "broxton-rt298",
+	.owner = THIS_MODULE,
+	.dai_link = broxton_rt298_dais,
+	.num_links = ARRAY_SIZE(broxton_rt298_dais),
+	.controls = broxton_controls,
+	.num_controls = ARRAY_SIZE(broxton_controls),
+	.dapm_widgets = broxton_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(broxton_widgets),
+	.dapm_routes = broxton_rt298_map,
+	.num_dapm_routes = ARRAY_SIZE(broxton_rt298_map),
+	.fully_routed = true,
+};
+
+static int broxton_audio_probe(struct platform_device *pdev)
+{
+	broxton_rt298.dev = &pdev->dev;
+
+	return devm_snd_soc_register_card(&pdev->dev, &broxton_rt298);
+}
+
+static struct platform_driver broxton_audio = {
+	.probe = broxton_audio_probe,
+	.driver = {
+		.name = "bxt_alc298s_i2s",
+	},
+};
+module_platform_driver(broxton_audio)
+
+/* Module information */
+MODULE_AUTHOR("Ramesh Babu <Ramesh.Babu@intel.com>");
+MODULE_AUTHOR("Senthilnathan Veppur <senthilnathanx.veppur@intel.com>");
+MODULE_DESCRIPTION("Intel SST Audio for Broxton");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bxt_alc298s_i2s");