diff mbox

[3/3,RFC] devfreq: Add current freq callback in device profile

Message ID 1345227645-20703-4-git-send-email-rajagopal.venkat@linaro.org
State New
Headers show

Commit Message

rajagopal.venkat@linaro.org Aug. 17, 2012, 6:20 p.m. UTC 
Devfreq returns governor predicted frequency as current
frequency via sysfs interface. But device may not support
all frequencies that governor predicts. As per the design
its driver responsibility to maintain current frequency
at which device is operating. So add a callback in device
profile to fix this.

Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
---
 drivers/devfreq/devfreq.c | 14 ++++++++++++--
 include/linux/devfreq.h   |  6 +++---
 2 files changed, 15 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 375b5aa1..798e8ca 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -176,7 +176,6 @@  struct devfreq *devfreq_add_device(struct device *dev,
 	devfreq->dev.release = devfreq_dev_release;
 	devfreq->profile = profile;
 	devfreq->governor = governor;
-	devfreq->previous_freq = profile->initial_freq;
 	devfreq->governor_data = data;
 	devfreq->nb.notifier_call = devfreq_notifier_call;
 	devfreq->min_freq = profile->min_freq;
@@ -272,7 +271,18 @@  static ssize_t show_governor(struct device *dev,
 static ssize_t show_freq(struct device *dev,
 			 struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%lu\n", to_devfreq(dev)->previous_freq);
+	int ret;
+	unsigned long freq;
+	struct devfreq *devfreq = to_devfreq(dev);
+
+	if (devfreq->profile->get_cur_freq) {
+		ret = devfreq->profile->get_cur_freq(devfreq->dev.parent,
+							&freq);
+		if (!ret)
+			return sprintf(buf, "%lu\n", freq);
+	}
+
+	return sprintf(buf, "<unknown>");
 }
 
 static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr,
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 7c6517f..43f111f 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -76,6 +76,8 @@  struct devfreq_dev_status {
  *			explained above with "DEVFREQ_FLAG_*" macros.
  * @get_dev_status	The device should provide the current performance
  *			status to devfreq, which is used by governors.
+ * @get_cur_freq	The device should provide the current frequency
+ *			at which it is operating.
  * @exit		An optional callback that is called when devfreq
  *			is removing the devfreq object due to error or
  *			from devfreq_remove_device() call. If the user
@@ -91,6 +93,7 @@  struct devfreq_dev_profile {
 	int (*target)(struct device *dev, unsigned long *freq, u32 flags);
 	int (*get_dev_status)(struct device *dev,
 			      struct devfreq_dev_status *stat);
+	int (*get_cur_freq)(struct device *dev, unsigned long *freq);
 	void (*exit)(struct device *dev);
 };
 
@@ -119,7 +122,6 @@  struct devfreq_governor {
  * @nb		notifier block used to notify devfreq object that it should
  *		reevaluate operable frequencies. Devfreq users may use
  *		devfreq.nb to the corresponding register notifier call chain.
- * @previous_freq	previously configured frequency value.
  * @governor_data	Private data of the governor. The devfreq framework
  *			does not touch this.
  * @min_freq	Limit minimum frequency requested by user (0: none)
@@ -142,8 +144,6 @@  struct devfreq {
 	const struct devfreq_governor *governor;
 	struct notifier_block nb;
 
-	unsigned long previous_freq;
-
 	void *governor_data; /* private data for governors */
 
 	unsigned long min_freq;