@@ -22,11 +22,11 @@
#define RTL821x_INER 0x12
#define RTL821x_INER_INIT 0x6400
#define RTL821x_INSR 0x13
+#define RTL821x_PAGE_SELECT 0x1f
#define RTL8211E_INER_LINK_STATUS 0x400
#define RTL8211F_INER_LINK_STATUS 0x0010
#define RTL8211F_INSR 0x1d
-#define RTL8211F_PAGE_SELECT 0x1f
#define RTL8211F_TX_DELAY 0x100
MODULE_DESCRIPTION("Realtek PHY driver");
@@ -46,10 +46,10 @@ static int rtl8211f_ack_interrupt(struct phy_device *phydev)
{
int err;
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0xa43);
+ phy_write(phydev, RTL821x_PAGE_SELECT, 0xa43);
err = phy_read(phydev, RTL8211F_INSR);
/* restore to default page 0 */
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+ phy_write(phydev, RTL821x_PAGE_SELECT, 0x0);
return (err < 0) ? err : 0;
}
@@ -102,7 +102,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
+ phy_write(phydev, RTL821x_PAGE_SELECT, 0xd08);
reg = phy_read(phydev, 0x11);
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
@@ -114,7 +114,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
phy_write(phydev, 0x11, reg);
/* restore to default page 0 */
- phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+ phy_write(phydev, RTL821x_PAGE_SELECT, 0x0);
return 0;
}
This renames the definition of page select register from RTL8211F_PAGE_SELECT to RTL821x_PAGE_SELECT to use it across models. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- Changes since v1: - new patch in this series --- drivers/net/phy/realtek.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) -- 2.7.4