@@ -749,6 +749,10 @@ config SND_SOC_RT5514
config SND_SOC_RT5514_SPI
tristate
+config SND_SOC_RT5514_SPI_BUILTIN
+ bool # force RT5514_SPI to be built-in to avoid link errors
+ default SND_SOC_RT5514=y && SND_SOC_RT5514_SPI=m
+
config SND_SOC_RT5616
tristate "Realtek RT5616 CODEC"
depends on I2C
@@ -360,6 +360,7 @@ obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o
obj-$(CONFIG_SND_SOC_RT298) += snd-soc-rt298.o
obj-$(CONFIG_SND_SOC_RT5514) += snd-soc-rt5514.o
obj-$(CONFIG_SND_SOC_RT5514_SPI) += snd-soc-rt5514-spi.o
+obj-$(CONFIG_SND_SOC_RT5514_SPI_BUILTIN) += snd-soc-rt5514-spi.o
obj-$(CONFIG_SND_SOC_RT5616) += snd-soc-rt5616.o
obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o
obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o
The main rt5514 driver optionally calls into the SPI back-end to load the firmware. This causes a link error when one driver selects rt5514 as built-in and another driver selects rt5514-spi as a loadable module: sound/soc/codecs/rt5514.o: In function `rt5514_dsp_voice_wake_up_put': rt5514.c:(.text+0xac8): undefined reference to `rt5514_spi_burst_write' As a workaround, this adds another silent symbol, to force rt5514-spi to be built-in for that configuration. I'm not overly happy with that solution, but couldn't come up with anything better. Using 'IS_REACHABLE()' would break the case that relies on the loadable module, and all other ideas would result in more complexity. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- sound/soc/codecs/Kconfig | 4 ++++ sound/soc/codecs/Makefile | 1 + 2 files changed, 5 insertions(+) -- 2.9.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel