diff mbox series

[05/20] ARM: dts: aspeed: Add proper clock references

Message ID 20171211050704.20621-6-joel@jms.id.au
State Superseded
Headers show
Series None | expand

Commit Message

Joel Stanley Dec. 11, 2017, 5:06 a.m. UTC 
The existing device trees use fixed-clocks in order to boot without a
clk driver. The newly added clk driver provides proper clock support,
including gating, so we move the device trees over to properly request
clocks.

Signed-off-by: Joel Stanley <joel@jms.id.au>

---
 arch/arm/boot/dts/aspeed-g4.dtsi | 100 +++++++++++++++----------------------
 arch/arm/boot/dts/aspeed-g5.dtsi | 104 +++++++++++++++------------------------
 2 files changed, 81 insertions(+), 123 deletions(-)

-- 
2.14.1

Comments

Joel Stanley Dec. 11, 2017, 10:44 a.m. UTC | #1 
On Mon, Dec 11, 2017 at 6:39 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Mon, Dec 11, 2017 at 6:06 AM, Joel Stanley <joel@jms.id.au> wrote:

>> The existing device trees use fixed-clocks in order to boot without a

>> clk driver. The newly added clk driver provides proper clock support,

>> including gating, so we move the device trees over to properly request

>> clocks.

>>

>> Signed-off-by: Joel Stanley <joel@jms.id.au>

>

> Can you clarify here whether this will break running old kernels with

> new DT files or vice versa, and why this is ok here?


This device tree will break kernels that do not have the clk patches
applied (no clocksource, as we don't know the speed of the APB clock.
You can boot if you pass a lpj value on the command line, but won't
have a uart).

Older device trees running with the newer kernel will function as well
as pre-4.16 kernels. That is, that some IP blocks (i2c, pwm/tach, adc)
will not work as the kernel lacks reset controller and clock enabling.

> I assume you have thought about it carefully, but I'd still like to document

> every time we intentionally break compatibility like this. It looks like

> you too care to merge the driver changes and the DT binding change first,

> so we don't get any bisection problems.


Thanks for calling it out. I will modify the commit message to say
that this device tree change depends on the newer driver, and it will
not boot with kernels that lack the driver.

>

> What I'm not completely clear about is the difference between the

> "aspeed,g4-scu" binding and the "aspeed,ast2400-scu" binding.

> They are listed as equal in

> Documentation/devicetree/bindings/mfd/aspeed-scu.txt, so why do you

> change it here?


The g4-scu string made it into the tree before we had decided that we
would settle on aspeed,astX000-<ip> as the format for the strings. We
list both in the docs, but I would like to deprecate the old one.

If I was doing this again, I would make sure we had the clock driver
upstream before completing the other driver. It's caused a lot of
pain. Thanks for your help getting us there.

Cheers,

Joel
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b6d01523555a..c87883a7f250 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
 #include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
@@ -107,47 +108,12 @@ 
 			ranges;
 
 			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-
-                                clk_clkin: clk_clkin {
-                                        #clock-cells = <0>;
-                                        compatible = "fixed-clock";
-                                        clock-frequency = <48000000>;
-                                };
-
-                                clk_hpll: clk_hpll@70 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-hpll-clock", "fixed-clock";
-                                        reg = <0x70>;
-                                        clocks = <&clk_clkin>;
-                                        clock-frequency = <384000000>;
-                                };
-
-                                clk_ahb: clk_ahb@70 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-ahb-clock", "fixed-clock";
-                                        reg = <0x70>;
-                                        clocks = <&clk_hpll>;
-                                        clock-frequency = <192000000>;
-                                };
-
-                                clk_apb: clk_apb@8 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-apb-clock", "fixed-clock";
-                                        reg = <0x08>;
-                                        clocks = <&clk_hpll>;
-                                        clock-frequency = <48000000>;
-                                };
-
-                                clk_uart: clk_uart@2c{
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-uart-clock", "fixed-clock";
-                                        reg = <0x2c>;
-                                        clock-frequency = <24000000>;
-                                };
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 
 				pinctrl: pinctrl {
 					compatible = "aspeed,g4-pinctrl";
@@ -157,7 +123,7 @@ 
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2400-adc";
 				reg = <0x1e6e9000 0xb0>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				#io-channel-cells = <1>;
 				status = "disabled";
 			};
@@ -182,7 +148,7 @@ 
 				compatible = "aspeed,ast2400-timer";
 				reg = <0x1e782000 0x90>;
 				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				clock-names = "PCLK";
 			};
 
@@ -191,7 +157,7 @@ 
 				reg = <0x1e783000 0x20>;
 				reg-shift = <2>;
 				interrupts = <9>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -201,7 +167,7 @@ 
 				reg = <0x1e784000 0x20>;
 				reg-shift = <2>;
 				interrupts = <10>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -221,7 +187,7 @@ 
 				reg = <0x1e787000 0x40>;
 				reg-shift = <2>;
 				interrupts = <8>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -266,7 +232,7 @@ 
 				reg = <0x1e78d000 0x20>;
 				reg-shift = <2>;
 				interrupts = <32>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -276,7 +242,7 @@ 
 				reg = <0x1e78e000 0x20>;
 				reg-shift = <2>;
 				interrupts = <33>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -286,7 +252,7 @@ 
 				reg = <0x1e78f000 0x20>;
 				reg-shift = <2>;
 				interrupts = <34>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -317,7 +283,8 @@ 
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <0>;
 		interrupt-parent = <&i2c_ic>;
@@ -332,7 +299,8 @@ 
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <1>;
 		interrupt-parent = <&i2c_ic>;
@@ -347,7 +315,8 @@ 
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <2>;
 		interrupt-parent = <&i2c_ic>;
@@ -363,7 +332,8 @@ 
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <3>;
 		interrupt-parent = <&i2c_ic>;
@@ -379,7 +349,8 @@ 
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <4>;
 		interrupt-parent = <&i2c_ic>;
@@ -395,7 +366,8 @@ 
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <5>;
 		interrupt-parent = <&i2c_ic>;
@@ -411,7 +383,8 @@ 
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <6>;
 		interrupt-parent = <&i2c_ic>;
@@ -427,7 +400,8 @@ 
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <7>;
 		interrupt-parent = <&i2c_ic>;
@@ -443,7 +417,8 @@ 
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <8>;
 		interrupt-parent = <&i2c_ic>;
@@ -459,7 +434,8 @@ 
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <9>;
 		interrupt-parent = <&i2c_ic>;
@@ -475,7 +451,8 @@ 
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <10>;
 		interrupt-parent = <&i2c_ic>;
@@ -491,7 +468,8 @@ 
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <11>;
 		interrupt-parent = <&i2c_ic>;
@@ -507,7 +485,8 @@ 
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <12>;
 		interrupt-parent = <&i2c_ic>;
@@ -523,7 +502,8 @@ 
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <13>;
 		interrupt-parent = <&i2c_ic>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7861631940fe..90bc09d93ea6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
 #include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
@@ -141,55 +142,18 @@ 
 			ranges;
 
 			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-
-				clk_clkin: clk_clkin@70 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-clkin-clock", "fixed-clock";
-					reg = <0x70>;
-					clock-frequency = <24000000>;
-				};
-
-				clk_hpll: clk_hpll@24 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-hpll-clock", "fixed-clock";
-					reg = <0x24>;
-					clocks = <&clk_clkin>;
-					clock-frequency = <792000000>;
-				};
-
-				clk_ahb: clk_ahb@70 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-ahb-clock", "fixed-clock";
-					reg = <0x70>;
-					clocks = <&clk_hpll>;
-					clock-frequency = <198000000>;
-				};
-
-				clk_apb: clk_apb@8 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-apb-clock", "fixed-clock";
-					reg = <0x08>;
-					clocks = <&clk_hpll>;
-					clock-frequency = <24750000>;
-				};
-
-				clk_uart: clk_uart@2c {
-					#clock-cells = <0>;
-					compatible = "aspeed,uart-clock", "fixed-clock";
-					reg = <0x2c>;
-					clock-frequency = <24000000>;
-				};
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 
 				pinctrl: pinctrl {
 					compatible = "aspeed,g5-pinctrl";
 					aspeed,external-nodes = <&gfx &lhc>;
 
 				};
-
 			};
 
 			gfx: display@1e6e6000 {
@@ -201,7 +165,7 @@ 
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2500-adc";
 				reg = <0x1e6e9000 0xb0>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				#io-channel-cells = <1>;
 				status = "disabled";
 			};
@@ -226,7 +190,7 @@ 
 				compatible = "aspeed,ast2400-timer";
 				reg = <0x1e782000 0x90>;
 				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				clock-names = "PCLK";
 			};
 
@@ -235,7 +199,7 @@ 
 				reg = <0x1e783000 0x20>;
 				reg-shift = <2>;
 				interrupts = <9>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -245,7 +209,7 @@ 
 				reg = <0x1e784000 0x20>;
 				reg-shift = <2>;
 				interrupts = <10>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -270,8 +234,8 @@ 
 				compatible = "aspeed,ast2500-vuart";
 				reg = <0x1e787000 0x40>;
 				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -318,7 +282,7 @@ 
 				reg = <0x1e78d000 0x20>;
 				reg-shift = <2>;
 				interrupts = <32>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -328,7 +292,7 @@ 
 				reg = <0x1e78e000 0x20>;
 				reg-shift = <2>;
 				interrupts = <33>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -338,7 +302,7 @@ 
 				reg = <0x1e78f000 0x20>;
 				reg-shift = <2>;
 				interrupts = <34>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -369,7 +333,8 @@ 
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <0>;
 		interrupt-parent = <&i2c_ic>;
@@ -384,7 +349,8 @@ 
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <1>;
 		interrupt-parent = <&i2c_ic>;
@@ -399,7 +365,8 @@ 
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <2>;
 		interrupt-parent = <&i2c_ic>;
@@ -415,7 +382,8 @@ 
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <3>;
 		interrupt-parent = <&i2c_ic>;
@@ -431,7 +399,8 @@ 
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <4>;
 		interrupt-parent = <&i2c_ic>;
@@ -447,7 +416,8 @@ 
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <5>;
 		interrupt-parent = <&i2c_ic>;
@@ -463,7 +433,8 @@ 
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <6>;
 		interrupt-parent = <&i2c_ic>;
@@ -479,7 +450,8 @@ 
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <7>;
 		interrupt-parent = <&i2c_ic>;
@@ -495,7 +467,8 @@ 
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <8>;
 		interrupt-parent = <&i2c_ic>;
@@ -511,7 +484,8 @@ 
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <9>;
 		interrupt-parent = <&i2c_ic>;
@@ -527,7 +501,8 @@ 
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <10>;
 		interrupt-parent = <&i2c_ic>;
@@ -543,7 +518,8 @@ 
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <11>;
 		interrupt-parent = <&i2c_ic>;
@@ -559,7 +535,8 @@ 
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <12>;
 		interrupt-parent = <&i2c_ic>;
@@ -575,7 +552,8 @@ 
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <13>;
 		interrupt-parent = <&i2c_ic>;