diff mbox series

[17/18] bus/dpaa: add support for static queues

Message ID 1513166759-13466-18-git-send-email-hemant.agrawal@nxp.com
State Superseded
Headers show
Series DPAA PMD improvements | expand

Commit Message

Hemant Agrawal Dec. 13, 2017, 12:05 p.m. UTC
DPAA hardware support two kinds of queues:
1. Pull mode queue - where one needs to regularly pull the packets.
2. Push mode queue - where the hw pushes the packet to queue. These are
   high performance queues, but limitd in number.

This patch add the driver support for push m de queues.

Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

---
 drivers/bus/dpaa/base/qbman/qman.c        | 64 +++++++++++++++++++++++++++++++
 drivers/bus/dpaa/base/qbman/qman.h        |  4 +-
 drivers/bus/dpaa/include/fsl_qman.h       | 10 +++++
 drivers/bus/dpaa/rte_bus_dpaa_version.map |  2 +
 4 files changed, 78 insertions(+), 2 deletions(-)

-- 
2.7.4

Comments

Ferruh Yigit Jan. 9, 2018, 10:46 a.m. UTC | #1
On 12/13/2017 12:05 PM, Hemant Agrawal wrote:
> DPAA hardware support two kinds of queues:

> 1. Pull mode queue - where one needs to regularly pull the packets.

> 2. Push mode queue - where the hw pushes the packet to queue. These are

>    high performance queues, but limitd in number.


limited

> 

> This patch add the driver support for push m de queues.


push mode

> 

> Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>

> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>


<...>
diff mbox series

Patch

diff --git a/drivers/bus/dpaa/base/qbman/qman.c b/drivers/bus/dpaa/base/qbman/qman.c
index b2f82a3..42d509d 100644
--- a/drivers/bus/dpaa/base/qbman/qman.c
+++ b/drivers/bus/dpaa/base/qbman/qman.c
@@ -1080,6 +1080,70 @@  u16 qman_affine_channel(int cpu)
 	return affine_channels[cpu];
 }
 
+unsigned int qman_portal_poll_rx(unsigned int poll_limit,
+				 void **bufs,
+				 struct qman_portal *p)
+{
+	const struct qm_dqrr_entry *dq;
+	struct qman_fq *fq;
+	enum qman_cb_dqrr_result res;
+	unsigned int limit = 0;
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	struct qm_dqrr_entry *shadow;
+#endif
+	unsigned int rx_number = 0;
+
+	do {
+		qm_dqrr_pvb_update(&p->p);
+		dq = qm_dqrr_current(&p->p);
+		if (unlikely(!dq))
+			break;
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	/* If running on an LE system the fields of the
+	 * dequeue entry must be swapper.  Because the
+	 * QMan HW will ignore writes the DQRR entry is
+	 * copied and the index stored within the copy
+	 */
+		shadow = &p->shadow_dqrr[DQRR_PTR2IDX(dq)];
+		*shadow = *dq;
+		dq = shadow;
+		shadow->fqid = be32_to_cpu(shadow->fqid);
+		shadow->contextB = be32_to_cpu(shadow->contextB);
+		shadow->seqnum = be16_to_cpu(shadow->seqnum);
+		hw_fd_to_cpu(&shadow->fd);
+#endif
+
+		/* SDQCR: context_b points to the FQ */
+#ifdef CONFIG_FSL_QMAN_FQ_LOOKUP
+		fq = get_fq_table_entry(dq->contextB);
+#else
+		fq = (void *)(uintptr_t)dq->contextB;
+#endif
+		/* Now let the callback do its stuff */
+		res = fq->cb.dqrr_dpdk_cb(NULL, p, fq, dq, &bufs[rx_number]);
+		rx_number++;
+		/* Interpret 'dq' from a driver perspective. */
+		/*
+		 * Parking isn't possible unless HELDACTIVE was set. NB,
+		 * FORCEELIGIBLE implies HELDACTIVE, so we only need to
+		 * check for HELDACTIVE to cover both.
+		 */
+		DPAA_ASSERT((dq->stat & QM_DQRR_STAT_FQ_HELDACTIVE) ||
+			    (res != qman_cb_dqrr_park));
+		qm_dqrr_cdc_consume_1ptr(&p->p, dq, res == qman_cb_dqrr_park);
+		/* Move forward */
+		qm_dqrr_next(&p->p);
+		/*
+		 * Entry processed and consumed, increment our counter.  The
+		 * callback can request that we exit after consuming the
+		 * entry, and we also exit if we reach our processing limit,
+		 * so loop back only if neither of these conditions is met.
+		 */
+	} while (likely(++limit < poll_limit));
+
+	return limit;
+}
+
 struct qm_dqrr_entry *qman_dequeue(struct qman_fq *fq)
 {
 	struct qman_portal *p = get_affine_portal();
diff --git a/drivers/bus/dpaa/base/qbman/qman.h b/drivers/bus/dpaa/base/qbman/qman.h
index 2c0f694..999e429 100644
--- a/drivers/bus/dpaa/base/qbman/qman.h
+++ b/drivers/bus/dpaa/base/qbman/qman.h
@@ -187,7 +187,7 @@  struct qm_eqcr {
 };
 
 struct qm_dqrr {
-	const struct qm_dqrr_entry *ring, *cursor;
+	struct qm_dqrr_entry *ring, *cursor;
 	u8 pi, ci, fill, ithresh, vbit;
 #ifdef RTE_LIBRTE_DPAA_HWDEBUG
 	enum qm_dqrr_dmode dmode;
@@ -460,7 +460,7 @@  static inline u8 DQRR_PTR2IDX(const struct qm_dqrr_entry *e)
 	return ((uintptr_t)e >> 6) & (QM_DQRR_SIZE - 1);
 }
 
-static inline const struct qm_dqrr_entry *DQRR_INC(
+static inline struct qm_dqrr_entry *DQRR_INC(
 						const struct qm_dqrr_entry *e)
 {
 	return DQRR_CARRYCLEAR(e + 1);
diff --git a/drivers/bus/dpaa/include/fsl_qman.h b/drivers/bus/dpaa/include/fsl_qman.h
index 9090b63..7ec07ee 100644
--- a/drivers/bus/dpaa/include/fsl_qman.h
+++ b/drivers/bus/dpaa/include/fsl_qman.h
@@ -1157,6 +1157,12 @@  typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm,
 					struct qman_fq *fq,
 					const struct qm_dqrr_entry *dqrr);
 
+typedef enum qman_cb_dqrr_result (*qman_dpdk_cb_dqrr)(void *event,
+					struct qman_portal *qm,
+					struct qman_fq *fq,
+					const struct qm_dqrr_entry *dqrr,
+					void **bd);
+
 /*
  * This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They
  * are always consumed after the callback returns.
@@ -1215,6 +1221,7 @@  enum qman_fq_state {
  */
 
 struct qman_fq_cb {
+	qman_dpdk_cb_dqrr dqrr_dpdk_cb;	/* for dequeued frames */
 	qman_cb_dqrr dqrr;	/* for dequeued frames */
 	qman_cb_mr ern;		/* for s/w ERNs */
 	qman_cb_mr fqs;		/* frame-queue state changes*/
@@ -1332,6 +1339,9 @@  int qman_get_portal_index(void);
  */
 u16 qman_affine_channel(int cpu);
 
+unsigned int qman_portal_poll_rx(unsigned int poll_limit,
+				 void **bufs, struct qman_portal *q);
+
 /**
  * qman_set_vdq - Issue a volatile dequeue command
  * @fq: Frame Queue on which the volatile dequeue command is issued
diff --git a/drivers/bus/dpaa/rte_bus_dpaa_version.map b/drivers/bus/dpaa/rte_bus_dpaa_version.map
index 212c75f..460cfbf 100644
--- a/drivers/bus/dpaa/rte_bus_dpaa_version.map
+++ b/drivers/bus/dpaa/rte_bus_dpaa_version.map
@@ -70,9 +70,11 @@  DPDK_18.02 {
 
 	dpaa_svr_family;
 	qman_alloc_cgrid_range;
+	qman_alloc_pool_range;
 	qman_create_cgr;
 	qman_delete_cgr;
 	qman_modify_cgr;
+	qman_portal_poll_rx;
 	qman_query_fq_frm_cnt;
 	qman_release_cgrid_range;
 	rte_dpaa_portal_fq_close;