| Message ID | 20180122182247.18490-2-julien.grall@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | xen/arm: GICv3: Only initialize ITS when LPIs are available | expand |
Hi, On 22/01/18 18:22, Julien Grall wrote: > There are Device Tree (e.g for the Foundation Model) out that describes the > ITS but LPIs is not supported by the platform. Booting with such DT will > result to an early Data Abort. The same DT is booting fine with a > baremetal Linux because ITS will be initialized only when LPIs is > supported. > > While this is a bug in the DT, I think Xen should be boot with the same > hardware level support (e.g ITS will not be used) as with a baremetal > Linux. > > The slight problem is Xen is relying on gicv3_its_host_has_its() to know > if ITS can be used. The list is populated by gicv3_its_{dt,acpi}_init(). > It would theoritical be possible to gate those with a check of > GICD_TYPER.LPIS because we don't know yet whether the HW is an actual > GICv3/GICv4. > > Looking at the callers of gicv3_its_host_has_its(), they will only be > done after gicv3_its_init() is called. Therefore move the parsing of ITS > information from firmware tables later on. > > Note that gicv3_its_init() has been moved at the end of the file to > avoid forward declaration. > > Signed-off-by: Julien Grall <julien.grall@linaro.org> > > --- > > I can move the code movement in a separate patch if necessary. It was > small enough that I thought it would not be worth. > --- > xen/arch/arm/gic-v3-its.c | 47 +++++++++++++++++++++++++--------------- > xen/arch/arm/gic-v3.c | 5 ----- > xen/include/asm-arm/gic_v3_its.h | 12 ---------- > 3 files changed, 30 insertions(+), 34 deletions(-) > > diff --git a/xen/arch/arm/gic-v3-its.c b/xen/arch/arm/gic-v3-its.c > index e57ae05771..b01a0d9eb5 100644 > --- a/xen/arch/arm/gic-v3-its.c > +++ b/xen/arch/arm/gic-v3-its.c > @@ -515,21 +515,6 @@ static int gicv3_its_init_single_its(struct host_its *hw_its) > return 0; > } > > -int gicv3_its_init(void) > -{ > - struct host_its *hw_its; > - int ret; > - > - list_for_each_entry(hw_its, &host_its_list, entry) > - { > - ret = gicv3_its_init_single_its(hw_its); > - if ( ret ) > - return ret; > - } > - > - return 0; > -} > - > /* > * TODO: Investigate the interaction when a guest removes a device while > * some LPIs are still in flight. > @@ -1019,7 +1004,7 @@ static void add_to_host_its_list(paddr_t addr, paddr_t size, > } > > /* Scan the DT for any ITS nodes and create a list of host ITSes out of it. */ > -void gicv3_its_dt_init(const struct dt_device_node *node) > +static void gicv3_its_dt_init(const struct dt_device_node *node) > { > const struct dt_device_node *its = NULL; > > @@ -1056,7 +1041,7 @@ static int gicv3_its_acpi_probe(struct acpi_subtable_header *header, > return 0; > } > > -void gicv3_its_acpi_init(void) > +static void gicv3_its_acpi_init(void) > { > /* Parse ITS information */ > acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, > @@ -1081,8 +1066,36 @@ unsigned long gicv3_its_make_hwdom_madt(const struct domain *d, void *base_ptr) > > return sizeof(struct acpi_madt_generic_translator) * vgic_v3_its_count(d); > } > +#else /* !CONFIG_ACPI */ > + > +static void gicv3_its_acpi_init(void) > +{ > + ASSERT_UNREACHABLE(); > +} > + > #endif > > +int gicv3_its_init(void) > +{ > + struct host_its *hw_its; > + int ret; > + > + if ( acpi_disabled ) > + gicv3_its_dt_init(); Hmmm I am not sure how I tested this code. gicv3_its_dt_init require the DT node in parameter. I will send a new version. Cheers,
diff --git a/xen/arch/arm/gic-v3-its.c b/xen/arch/arm/gic-v3-its.c index e57ae05771..b01a0d9eb5 100644 --- a/xen/arch/arm/gic-v3-its.c +++ b/xen/arch/arm/gic-v3-its.c @@ -515,21 +515,6 @@ static int gicv3_its_init_single_its(struct host_its *hw_its) return 0; } -int gicv3_its_init(void) -{ - struct host_its *hw_its; - int ret; - - list_for_each_entry(hw_its, &host_its_list, entry) - { - ret = gicv3_its_init_single_its(hw_its); - if ( ret ) - return ret; - } - - return 0; -} - /* * TODO: Investigate the interaction when a guest removes a device while * some LPIs are still in flight. @@ -1019,7 +1004,7 @@ static void add_to_host_its_list(paddr_t addr, paddr_t size, } /* Scan the DT for any ITS nodes and create a list of host ITSes out of it. */ -void gicv3_its_dt_init(const struct dt_device_node *node) +static void gicv3_its_dt_init(const struct dt_device_node *node) { const struct dt_device_node *its = NULL; @@ -1056,7 +1041,7 @@ static int gicv3_its_acpi_probe(struct acpi_subtable_header *header, return 0; } -void gicv3_its_acpi_init(void) +static void gicv3_its_acpi_init(void) { /* Parse ITS information */ acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, @@ -1081,8 +1066,36 @@ unsigned long gicv3_its_make_hwdom_madt(const struct domain *d, void *base_ptr) return sizeof(struct acpi_madt_generic_translator) * vgic_v3_its_count(d); } +#else /* !CONFIG_ACPI */ + +static void gicv3_its_acpi_init(void) +{ + ASSERT_UNREACHABLE(); +} + #endif +int gicv3_its_init(void) +{ + struct host_its *hw_its; + int ret; + + if ( acpi_disabled ) + gicv3_its_dt_init(); + else + gicv3_its_acpi_init(); + + list_for_each_entry(hw_its, &host_its_list, entry) + { + ret = gicv3_its_init_single_its(hw_its); + if ( ret ) + return ret; + } + + return 0; +} + + /* * Local variables: * mode: C diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c index a0d290b55c..9f9cf59f82 100644 --- a/xen/arch/arm/gic-v3.c +++ b/xen/arch/arm/gic-v3.c @@ -1314,9 +1314,6 @@ static void __init gicv3_dt_init(void) if ( !res ) dt_device_get_address(node, 1 + gicv3.rdist_count + 2, &vbase, &vsize); - - /* Check for ITS child nodes and build the host ITS list accordingly. */ - gicv3_its_dt_init(node); } static int gicv3_iomem_deny_access(const struct domain *d) @@ -1608,8 +1605,6 @@ static void __init gicv3_acpi_init(void) gicv3.rdist_stride = 0; - gicv3_its_acpi_init(); - /* * In ACPI, 0 is considered as the invalid address. However the rest * of the initialization rely on the invalid address to be diff --git a/xen/include/asm-arm/gic_v3_its.h b/xen/include/asm-arm/gic_v3_its.h index 40dffdc0fa..78a9bb14de 100644 --- a/xen/include/asm-arm/gic_v3_its.h +++ b/xen/include/asm-arm/gic_v3_its.h @@ -133,11 +133,7 @@ struct host_its { extern struct list_head host_its_list; -/* Parse the host DT and pick up all host ITSes. */ -void gicv3_its_dt_init(const struct dt_device_node *node); - #ifdef CONFIG_ACPI -void gicv3_its_acpi_init(void); unsigned long gicv3_its_make_hwdom_madt(const struct domain *d, void *base_ptr); #endif @@ -202,15 +198,7 @@ void gicv3_lpi_update_host_entry(uint32_t host_lpi, int domain_id, #else -static inline void gicv3_its_dt_init(const struct dt_device_node *node) -{ -} - #ifdef CONFIG_ACPI -static inline void gicv3_its_acpi_init(void) -{ -} - static inline unsigned long gicv3_its_make_hwdom_madt(const struct domain *d, void *base_ptr) {
There are Device Tree (e.g for the Foundation Model) out that describes the ITS but LPIs is not supported by the platform. Booting with such DT will result to an early Data Abort. The same DT is booting fine with a baremetal Linux because ITS will be initialized only when LPIs is supported. While this is a bug in the DT, I think Xen should be boot with the same hardware level support (e.g ITS will not be used) as with a baremetal Linux. The slight problem is Xen is relying on gicv3_its_host_has_its() to know if ITS can be used. The list is populated by gicv3_its_{dt,acpi}_init(). It would theoritical be possible to gate those with a check of GICD_TYPER.LPIS because we don't know yet whether the HW is an actual GICv3/GICv4. Looking at the callers of gicv3_its_host_has_its(), they will only be done after gicv3_its_init() is called. Therefore move the parsing of ITS information from firmware tables later on. Note that gicv3_its_init() has been moved at the end of the file to avoid forward declaration. Signed-off-by: Julien Grall <julien.grall@linaro.org> --- I can move the code movement in a separate patch if necessary. It was small enough that I thought it would not be worth. --- xen/arch/arm/gic-v3-its.c | 47 +++++++++++++++++++++++++--------------- xen/arch/arm/gic-v3.c | 5 ----- xen/include/asm-arm/gic_v3_its.h | 12 ---------- 3 files changed, 30 insertions(+), 34 deletions(-)