@@ -22,6 +22,7 @@ struct clk_omap_divider {
u8 shift;
u8 width;
u8 flags;
+ s8 latch;
const struct clk_div_table *table;
};
@@ -263,6 +263,8 @@ static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
val |= value << divider->shift;
ti_clk_ll_ops->clk_writel(val, ÷r->reg);
+ ti_clk_latch(÷r->reg, divider->latch);
+
return 0;
}
@@ -276,7 +278,8 @@ static struct clk *_register_divider(struct device *dev, const char *name,
const char *parent_name,
unsigned long flags,
struct clk_omap_reg *reg,
- u8 shift, u8 width, u8 clk_divider_flags,
+ u8 shift, u8 width, s8 latch,
+ u8 clk_divider_flags,
const struct clk_div_table *table)
{
struct clk_omap_divider *div;
@@ -305,6 +308,7 @@ static struct clk *_register_divider(struct device *dev, const char *name,
memcpy(&div->reg, reg, sizeof(*reg));
div->shift = shift;
div->width = width;
+ div->latch = latch;
div->flags = clk_divider_flags;
div->hw.init = &init;
div->table = table;
@@ -420,6 +424,7 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup)
div->table = _get_div_table_from_setup(setup, &div->width);
div->shift = setup->bit_shift;
+ div->latch = -EINVAL;
return &div->hw;
}
@@ -452,7 +457,7 @@ struct clk *ti_clk_register_divider(struct ti_clk *setup)
clk = _register_divider(NULL, setup->name, div->parent,
flags, ®, div->bit_shift,
- width, div_flags, table);
+ width, -EINVAL, div_flags, table);
if (IS_ERR(clk))
kfree(table);
@@ -556,7 +561,7 @@ static int _get_divider_width(struct device_node *node,
static int __init ti_clk_divider_populate(struct device_node *node,
struct clk_omap_reg *reg, const struct clk_div_table **table,
- u32 *flags, u8 *div_flags, u8 *width, u8 *shift)
+ u32 *flags, u8 *div_flags, u8 *width, u8 *shift, s8 *latch)
{
u32 val;
int ret;
@@ -570,6 +575,13 @@ static int __init ti_clk_divider_populate(struct device_node *node,
else
*shift = 0;
+ if (latch) {
+ if (!of_property_read_u32(node, "ti,latch-bit", &val))
+ *latch = val;
+ else
+ *latch = -EINVAL;
+ }
+
*flags = 0;
*div_flags = 0;
@@ -606,17 +618,18 @@ static void __init of_ti_divider_clk_setup(struct device_node *node)
u8 clk_divider_flags = 0;
u8 width = 0;
u8 shift = 0;
+ s8 latch = -EINVAL;
const struct clk_div_table *table = NULL;
u32 flags = 0;
parent_name = of_clk_get_parent_name(node, 0);
if (ti_clk_divider_populate(node, ®, &table, &flags,
- &clk_divider_flags, &width, &shift))
+ &clk_divider_flags, &width, &shift, &latch))
goto cleanup;
clk = _register_divider(NULL, node->name, parent_name, flags, ®,
- shift, width, clk_divider_flags, table);
+ shift, width, latch, clk_divider_flags, table);
if (!IS_ERR(clk)) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
@@ -639,7 +652,8 @@ static void __init of_ti_composite_divider_clk_setup(struct device_node *node)
return;
if (ti_clk_divider_populate(node, &div->reg, &div->table, &val,
- &div->flags, &div->width, &div->shift) < 0)
+ &div->flags, &div->width, &div->shift,
+ NULL) < 0)
goto cleanup;
if (!ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER))
Latching the clock settings is needed with certain clocks, where the setting is "cached" in HW before doing the actual re-programming of the clock source. This patch adds support for clock latching to the divider clock. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- drivers/clk/ti/clock.h | 1 + drivers/clk/ti/divider.c | 26 ++++++++++++++++++++------ 2 files changed, 21 insertions(+), 6 deletions(-) -- 1.9.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html