diff mbox series

[01/27] cpufreq: imx6q: Find max freq from frequency table itself

Message ID d0b135d8e5ff080cb040f4be045e530394050243.1519620578.git.viresh.kumar@linaro.org
State Accepted
Commit 8d768cdcf0f517c643690aeca8101a928a6c36c8
Headers show
Series cpufreq: Stop validating cpufreq table in drivers | expand

Commit Message

Viresh Kumar Feb. 26, 2018, 5:08 a.m. UTC 
This is a preparatory commit to make policy->suspend_freq independent of
validation of the cpufreq table, as a later commit would update
cpufreq_generic_init() to not validate the cpufreq table any longer.

The driver already assumes the order in which the frequency table is
sorted and we can get the max frequency easily.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

---
 drivers/cpufreq/imx6q-cpufreq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

-- 
2.15.0.194.g9af6a3dea062
diff mbox series

Patch

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index ff67859948b3..83cf631fc9bc 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -52,6 +52,7 @@  static struct clk_bulk_data clks[] = {
 static struct device *cpu_dev;
 static bool free_opp;
 static struct cpufreq_frequency_table *freq_table;
+static unsigned int max_freq;
 static unsigned int transition_latency;
 
 static u32 *imx6_soc_volt;
@@ -196,7 +197,7 @@  static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 
 	policy->clk = clks[ARM].clk;
 	ret = cpufreq_generic_init(policy, freq_table, transition_latency);
-	policy->suspend_freq = policy->max;
+	policy->suspend_freq = max_freq;
 
 	return ret;
 }
@@ -437,12 +438,12 @@  static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	 * freq_table initialised from OPP is therefore sorted in the
 	 * same order.
 	 */
+	max_freq = freq_table[--num].frequency;
 	opp = dev_pm_opp_find_freq_exact(cpu_dev,
 				  freq_table[0].frequency * 1000, true);
 	min_volt = dev_pm_opp_get_voltage(opp);
 	dev_pm_opp_put(opp);
-	opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				  freq_table[--num].frequency * 1000, true);
+	opp = dev_pm_opp_find_freq_exact(cpu_dev, max_freq * 1000, true);
 	max_volt = dev_pm_opp_get_voltage(opp);
 	dev_pm_opp_put(opp);