@@ -22,6 +22,7 @@
*/
#include <common.h>
+#include <fdtdec.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
@@ -396,3 +397,30 @@ int exynos_pinmux_config(int peripheral, int flags)
return -1;
}
}
+
+#ifdef CONFIG_OF_CONTROL
+static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
+{
+ int err;
+ u32 cell[3];
+
+ err = fdtdec_get_int_array(blob, node, "interrupts", cell,
+ ARRAY_SIZE(cell));
+ if (err)
+ return PERIPH_ID_NONE;
+
+ if ((130 > cell[1]) || (cell[1] < 31))
+ return cell[1];
+
+ debug(" invalid peripheral id\n");
+ return PERIPH_ID_NONE;
+}
+
+int pinmux_decode_periph_id(const void *blob, int node)
+{
+ if (cpu_is_exynos5())
+ return exynos5_pinmux_decode_periph_id(blob, node);
+ else
+ return PERIPH_ID_NONE;
+}
+#endif
@@ -25,12 +25,17 @@
#define __ASM_ARM_ARCH_PERIPH_H
/*
- * Peripherals requiring clock/pinmux configuration. List will
+ * Peripherals requiring pinmux configuration0. List will
* grow with support for more devices getting added.
+ * Numbering based on interrupt table.
*
*/
enum periph_id {
- PERIPH_ID_I2C0,
+ PERIPH_ID_UART0 = 51,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+ PERIPH_ID_I2C0 = 56,
PERIPH_ID_I2C1,
PERIPH_ID_I2C2,
PERIPH_ID_I2C3,
@@ -38,22 +43,22 @@ enum periph_id {
PERIPH_ID_I2C5,
PERIPH_ID_I2C6,
PERIPH_ID_I2C7,
- PERIPH_ID_I2S1,
- PERIPH_ID_SDMMC0,
+ PERIPH_ID_SPI0 = 68,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SDMMC0 = 75,
PERIPH_ID_SDMMC1,
PERIPH_ID_SDMMC2,
PERIPH_ID_SDMMC3,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_SROMC,
- PERIPH_ID_SPI0,
- PERIPH_ID_SPI1,
- PERIPH_ID_SPI2,
+ PERIPH_ID_I2S1 = 99,
+
+/* Since following peripherals do not have shared peripheral interrupts (SPIs)
+ * they are numbered arbitiraly after the maximum SPIs Exynos has (128)
+ */
+ PERIPH_ID_SROMC = 128,
PERIPH_ID_SPI3,
PERIPH_ID_SPI4,
- PERIPH_ID_UART0,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
+ PERIPH_ID_SDMMC4,
PERIPH_ID_COUNT,
PERIPH_ID_NONE = -1,
@@ -55,4 +55,12 @@ enum {
*/
int exynos_pinmux_config(int peripheral, int flags);
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob Device tree blbo
+ * @param node FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
#endif
Api is added to decode peripheral id based on the interrupt number of the peripheral. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> --- Chnages in V3: - New patch added. Chnages in V4: - Renamed decode_periph_id to pinmux_decode_periph_id. - Added comments in periph.h as suggested by Simon Glass. arch/arm/cpu/armv7/exynos/pinmux.c | 28 ++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/periph.h | 31 ++++++++++++++++------------ arch/arm/include/asm/arch-exynos/pinmux.h | 8 +++++++ 3 files changed, 54 insertions(+), 13 deletions(-)