Message ID | 1526272473-25565-3-git-send-email-haojian.zhuang@linaro.org |
---|---|
State | New |
Headers | show |
Series | enable virtual keyboard | expand |
This is a significant improvement over previous versions, but there are still a few things I would like addressed. On Mon, May 14, 2018 at 12:34:29PM +0800, Haojian Zhuang wrote: > Do some basic initliazation on peripherals, such as pins and > regulators. > > Cc: Leif Lindholm <leif.lindholm@linaro.org> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > Platform/Hisilicon/HiKey960/HiKey960.dsc | 2 + > Platform/Hisilicon/HiKey960/HiKey960.fdf | 2 + > .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 186 ++++++++++++++++++++ > .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 91 ++++++++++ > .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 47 +++++ Please generate patches with --stat=1000 and --stat-graph-width=20 as per https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkempt-git-guide-for-edk2-contributors-and-maintainers#contrib-23 > Silicon/Hisilicon/Hi3660/Hi3660.dec | 32 ++++ > Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 194 +++++++++++++++++++++ > Silicon/Hisilicon/Hi3660/Include/Hkadc.h | 68 ++++++++ > 8 files changed, 622 insertions(+) > create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c > create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h > create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf > create mode 100644 Silicon/Hisilicon/Hi3660/Hi3660.dec > create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h > create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hkadc.h > > diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc > index 3da1b8556321..6cc1c1edf453 100644 > --- a/Platform/Hisilicon/HiKey960/HiKey960.dsc > +++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc > @@ -182,6 +182,8 @@ [Components.common] > Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf > ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf > > + Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf > + > # > # USB Host Support > # > diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf > index 162dbaaf2646..b7d70b010598 100644 > --- a/Platform/Hisilicon/HiKey960/HiKey960.fdf > +++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf > @@ -123,6 +123,8 @@ [FV.FvMain] > INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf > INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf > > + INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf > + > # > # USB Host Support > # > diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c > new file mode 100644 > index 000000000000..fae68feca89d > --- /dev/null > +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c > @@ -0,0 +1,186 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#include "HiKey960Dxe.h" > + > +STATIC > +VOID > +InitSdCard ( > + IN VOID > + ) > +{ > + UINT32 Data; > + > + // > + // LDO16 > + // 000: 1.75V, 001: 1.8V, 010: 2.4V, 011: 2.6V, 100: 2.7V, > + // 101: 2.85V, 110: 2.95V, 111: 3.0V. > + // > + Data = MmioRead32 (PMIC_LDO16_VSET_REG) & LDO16_VSET_MASK; > + Data |= 6; > + MmioWrite32 (PMIC_LDO16_VSET_REG, Data); > + MmioOr32 (PMIC_LDO16_ONOFF_ECO_REG, LDO16_ONOFF_ECO_LDO16_ENABLE); > + // > + // wait regulator stable > + // > + MicroSecondDelay (100); > + > + // > + // LDO9 > + // 000: 1.75V, 001: 1.8V, 010: 1.825V, 011: 2.8V, 100: 2.85V, > + // 101: 2.95V, 110: 3.0V, 111: 3.3V. > + // > + Data = MmioRead32 (PMIC_LDO9_VSET_REG) & LDO9_VSET_MASK; > + Data |= 5; > + MmioWrite32 (PMIC_LDO9_VSET_REG, Data); > + MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2); You have cleaned up some of the hardcoding, but much still remains. I understand you are working from some existing non-open reference code and may not be able to determine all of the reasons for the values. And the comments add some clarity. But please add a note to the commit message saying that some values are taken from existing reference code and cannot easily be resolved. > + // > + // wait regulator stable > + // > + MicroSecondDelay (100); > + > + // > + // GPIO203 > + // > + MmioWrite32 (IOMG_AO_REG_BASE + (24 << 2), 0); // GPIO function > + > + // > + // SD pinmux > + // > + MmioWrite32 (IOMG_MMC0_000_REG, IOMG_FUNC1); // SD_CLK > + MmioWrite32 (IOMG_MMC0_001_REG, IOMG_FUNC1); // SD_CMD > + MmioWrite32 (IOMG_MMC0_002_REG, IOMG_FUNC1); // SD_DATA0 > + MmioWrite32 (IOMG_MMC0_003_REG, IOMG_FUNC1); // SD_DATA1 > + MmioWrite32 (IOMG_MMC0_004_REG, IOMG_FUNC1); // SD_DATA2 > + MmioWrite32 (IOMG_MMC0_005_REG, IOMG_FUNC1); // SD_DATA3 > + MmioWrite32 (IOCG_MMC0_000_REG, IOCG_DRIVE (15)); // SD_CLK float with 32mA > + MmioWrite32 (IOCG_MMC0_001_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_CMD > + MmioWrite32 (IOCG_MMC0_002_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA0 > + MmioWrite32 (IOCG_MMC0_003_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA1 > + MmioWrite32 (IOCG_MMC0_004_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA2 > + MmioWrite32 (IOCG_MMC0_005_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA3 > + > + // > + // SC_SEL_SD: > + // 0xx: 3.2MHz, 100: PPLL0, 101: PPLL1, 11x: PPLL2. > + // SC_DIV_SD: > + // divider = value + 1 > + // > + do { > + MmioOr32 ( > + CRG_CLKDIV4, CLKDIV4_SC_SEL_SD (4) | CLKDIV4_SC_SEL_SD_MASK | > + CLKDIV4_SC_DIV_SD (0) | CLKDIV4_SC_DIV_SD_MASK > + ); > + Data = MmioRead32 (CRG_CLKDIV4) & > + (CLKDIV4_SC_SEL_SD_MASK | CLKDIV4_SC_DIV_SD_MASK); > + } while (Data != (CLKDIV4_SC_SEL_SD (4) | CLKDIV4_SC_DIV_SD (0))); > + > + // > + // Unreset SD controller > + // > + MmioWrite32 (CRG_PERRSTDIS4, PERRSTEN4_SD); > + do { > + Data = MmioRead32 (CRG_PERRSTSTAT4); > + } while ((Data & PERRSTEN4_SD) == PERRSTEN4_SD); > + // > + // Enable SD controller clock > + // > + MmioOr32 (CRG_PEREN0, PEREN0_GT_HCLK_SD); > + MmioOr32 (CRG_PEREN4, PEREN4_GT_CLK_SD); > + do { > + Data = MmioRead32 (CRG_PERCLKEN4); > + } while ((Data & PEREN4_GT_CLK_SD) != PEREN4_GT_CLK_SD); > +} > + > +VOID > +InitPeripherals ( > + IN VOID > + ) > +{ > + // > + // Enable FPLL0 > + // > + MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN); > + > + InitSdCard (); > + > + // > + // Enable wifi clock > + // > + MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK); > + MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K); > +} > + > +/** > + Notification function of the event defined as belonging to the > + EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in > + the entry point of the driver. > + > + This function is called when an event belonging to the > + EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an > + event is signalled once at the end of the dispatching of all > + drivers (end of the so called DXE phase). > + > + @param[in] Event Event declared in the entry point of the driver whose > + notification function is being invoked. > + @param[in] Context NULL > +**/ > +STATIC > +VOID > +OnEndOfDxe ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + UINT32 BootMode; > + > + BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK; > + if (BootMode == BOOT_MODE_RECOVERY) { > + SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48); > + SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57); I commented on v1: --- 1) Why this use of SerialPortWrite instead of Print? 2) This cast to (UINT8 *) works by accident. Please don't do this. 3) Please _never_ use hand-coded values for compile-time determined (and known) information. In this case the output string length. --- Please change to Print(). > + } > +} > + > +EFI_STATUS > +EFIAPI > +HiKey960EntryPoint ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + EFI_EVENT EndOfDxeEvent; > + > + InitPeripherals (); > + > + // > + // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. > + // The "OnEndOfDxe()" function is declared as the call back function. > + // It will be called at the end of the DXE phase when an event of the > + // same group is signalled to inform about the end of the DXE phase. > + // Install the INSTALL_FDT_PROTOCOL protocol. > + // > + Status = gBS->CreateEventEx ( > + EVT_NOTIFY_SIGNAL, > + TPL_CALLBACK, > + OnEndOfDxe, > + NULL, > + &gEfiEndOfDxeEventGroupGuid, > + &EndOfDxeEvent > + ); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + return Status; > +} > diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h > new file mode 100644 > index 000000000000..2e89d10e2723 > --- /dev/null > +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h > @@ -0,0 +1,91 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#ifndef __HIKEY960DXE_H__ > +#define __HIKEY960DXE_H__ > + > +#include <Guid/EventGroup.h> > + > +#include <Hi3660.h> > +#include <Hkadc.h> > + > +#include <Library/BaseLib.h> > +#include <Library/BaseMemoryLib.h> > +#include <Library/CacheMaintenanceLib.h> > +#include <Library/DebugLib.h> > +#include <Library/DevicePathLib.h> > +#include <Library/MemoryAllocationLib.h> > +#include <Library/IoLib.h> > +#include <Library/PcdLib.h> > +#include <Library/PrintLib.h> > +#include <Library/SerialPortLib.h> > +#include <Library/TimerLib.h> > +#include <Library/UefiBootServicesTableLib.h> This may have been caused by a miscommunication from my side, but please only include files needed by declarations in this file. Let the .c file include its own headers. This makes it easier to see which interfaces it makes use of. > + > +#define ADC_ADCIN0 0 > +#define ADC_ADCIN1 1 > +#define ADC_ADCIN2 2 > + > +#define HKADC_DATA_GRADE0 0 > +#define HKADC_DATA_GRADE1 100 > +#define HKADC_DATA_GRADE2 300 > +#define HKADC_DATA_GRADE3 500 > +#define HKADC_DATA_GRADE4 700 > +#define HKADC_DATA_GRADE5 900 > +#define HKADC_DATA_GRADE6 1100 > +#define HKADC_DATA_GRADE7 1300 > +#define HKADC_DATA_GRADE8 1500 > +#define HKADC_DATA_GRADE9 1700 > +#define HKADC_DATA_GRADE10 1800 > + > +#define BOARDID_VALUE0 0 > +#define BOARDID_VALUE1 1 > +#define BOARDID_VALUE2 2 > +#define BOARDID_VALUE3 3 > +#define BOARDID_VALUE4 4 > +#define BOARDID_VALUE5 5 > +#define BOARDID_VALUE6 6 > +#define BOARDID_VALUE7 7 > +#define BOARDID_VALUE8 8 > +#define BOARDID_VALUE9 9 > +#define BOARDID_UNKNOWN 0xF > + > +#define BOARDID3_BASE 5 > + > +#define HIKEY960_BOARDID_V1 5300 > +#define HIKEY960_BOARDID_V2 5301 > + > +#define HIKEY960_COMPATIBLE_LEDS_V1 "gpio-leds_v1" > +#define HIKEY960_COMPATIBLE_LEDS_V2 "gpio-leds_v2" > +#define HIKEY960_COMPATIBLE_HUB_V1 "hisilicon,gpio_hubv1" > +#define HIKEY960_COMPATIBLE_HUB_V2 "hisilicon,gpio_hubv2" Same with these. > + > +#define ADB_REBOOT_ADDRESS 0x32100000 > +#define ADB_REBOOT_BOOTLOADER 0x77665500 > +#define ADB_REBOOT_NONE 0x77665501 > + > +#define DETECT_SW_FASTBOOT 68 // GPIO8_4 > + > +enum { > + BOOT_MODE_RECOVERY = 0, > + BOOT_MODE_NORMAL, > + BOOT_MODE_MASK = 1, > +}; As far as I can tell, everything except for this enum belongs with code that has been deferred for later submission. Please delete the rest and bring them back with the code that uses them. > + > +typedef struct { > + UINTN DataGrade; > + UINTN BoardidValue; > +} HKADC_DATA; > + > +#endif /* __HIKEY960DXE_H__ */ > diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf > new file mode 100644 > index 000000000000..a1a7d005ce8b > --- /dev/null > +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf > @@ -0,0 +1,47 @@ > +# > +# Copyright (c) 2018, Linaro Limited. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > + > +[Defines] > + INF_VERSION = 0x0001001a > + BASE_NAME = HiKey960Dxe > + FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429 > + MODULE_TYPE = DXE_DRIVER > + VERSION_STRING = 1.0 > + ENTRY_POINT = HiKey960EntryPoint > + > +[Sources.common] > + HiKey960Dxe.c > + > +[Packages] > + EmbeddedPkg/EmbeddedPkg.dec > + MdeModulePkg/MdeModulePkg.dec > + MdePkg/MdePkg.dec > + Silicon/Hisilicon/Hi3660/Hi3660.dec > + > +[LibraryClasses] > + BaseMemoryLib > + CacheMaintenanceLib > + DxeServicesTableLib > + IoLib > + PcdLib > + TimerLib > + UefiDriverEntryPoint > + UefiLib > + > +[Protocols] > + gEmbeddedGpioProtocolGuid > + > +[Guids] > + gEfiEndOfDxeEventGroupGuid > + > +[Depex] > + TRUE > diff --git a/Silicon/Hisilicon/Hi3660/Hi3660.dec b/Silicon/Hisilicon/Hi3660/Hi3660.dec > new file mode 100644 > index 000000000000..5c69ac4f19b8 > --- /dev/null > +++ b/Silicon/Hisilicon/Hi3660/Hi3660.dec > @@ -0,0 +1,32 @@ > +# > +# Copyright (c) 2018, Linaro Limited. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > + > +[Defines] > + DEC_SPECIFICATION = 0x0001001a > + PACKAGE_NAME = Hi3660 > + PACKAGE_GUID = e457ba7c-faba-4dea-b274-f5962d016c79 > + PACKAGE_VERSION = 0.1 > + > +################################################################################ > +# > +# Include Section - list of Include Paths that are provided by this package. > +# Comments are used for Keywords and Module Types. > +# > +# Supported Module Types: > +# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION > +# > +################################################################################ > +[Includes.common] > + Include # Root include for the package > + > +[Guids.common] > + gHi3660TokenSpaceGuid = { 0x4abc73fa, 0x8a49, 0x4d2c, { 0x95, 0x44, 0x17, 0x87, 0x29, 0x06, 0x20, 0xb4 } } > diff --git a/Silicon/Hisilicon/Hi3660/Include/Hi3660.h b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h > new file mode 100644 > index 000000000000..ca07a4dd1b81 > --- /dev/null > +++ b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h > @@ -0,0 +1,194 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#ifndef __HI3660_H__ > +#define __HI3660_H__ > + > +#define HKADC_SSI_REG_BASE 0xE82B8000 > + > +#define PCTRL_REG_BASE 0xE8A09000 > + > +#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010) > +#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064) > + > +#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1) > +#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25) > + > +#define SCTRL_REG_BASE 0xFFF0A000 > + > +#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120) > +#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0) > + > +#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C) > + > +#define USB3OTG_BC_REG_BASE 0xFF200000 > + > +#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000) > +#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008) > +#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C) > +#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010) > +#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018) > +#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C) > +#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050) > +#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054) > + > +#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15) > +#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1) > +#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0) > +#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6) > +#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5) > +#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16) > +#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1) > +#define USB3OTG_PHY_CR_ACK (1 << 0) > +#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4) > +#define USB3OTG_PHY_CR_WRITE (1 << 3) > +#define USB3OTG_PHY_CR_READ (1 << 2) > +#define USB3OTG_PHY_CR_CAP_DATA (1 << 1) > +#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0) > + > +#define PMU_REG_BASE 0xFFF34000 > +#define PMIC_LDO9_VSET_REG (PMU_REG_BASE + (0x068 << 2)) > +#define LDO9_VSET_MASK (7 << 0) > + > +#define PMIC_LDO16_ONOFF_ECO_REG (PMU_REG_BASE + (0x078 << 2)) > +#define LDO16_ONOFF_ECO_LDO16_ENABLE BIT1 > +#define LDO16_ONOFF_ECO_ECO_ENABLE BIT0 > + > +#define PMIC_LDO16_VSET_REG (PMU_REG_BASE + (0x079 << 2)) > +#define LDO16_VSET_MASK (7 << 0) > + > +#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2)) > +#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2)) > + > +#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5) > +#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1) > + > + > +#define CRG_REG_BASE 0xFFF35000 > + > +#define CRG_PEREN0 (CRG_REG_BASE + 0x000) > +#define CRG_PEREN2 (CRG_REG_BASE + 0x020) > +#define CRG_PERDIS2 (CRG_REG_BASE + 0x024) > +#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028) > +#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C) > +#define CRG_PEREN4 (CRG_REG_BASE + 0x040) > +#define CRG_PERDIS4 (CRG_REG_BASE + 0x044) > +#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048) > +#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C) > +#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078) > +#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C) > +#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080) > +#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084) > +#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088) > +#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C) > +#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090) > +#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094) > +#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098) > +#define CRG_CLKDIV4 (CRG_REG_BASE + 0x0B8) > +#define CRG_ISOEN (CRG_REG_BASE + 0x144) > +#define CRG_ISODIS (CRG_REG_BASE + 0x148) > +#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C) > + > +#define PERI_UFS_BIT (1 << 12) > +#define PERI_ARST_UFS_BIT (1 << 7) > + > +#define PEREN0_GT_HCLK_SD BIT30 > + > +#define PEREN2_HKADCSSI BIT24 > + > +#define PEREN4_GT_CLK_SD BIT17 > +#define PEREN4_GT_ACLK_USB3OTG (1 << 1) > +#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0) > + > +#define PERRSTEN2_HKADCSSI BIT24 > + > +#define PERRSTEN4_SD BIT18 > + > +#define PERRSTEN4_USB3OTG_MUX (1 << 8) > +#define PERRSTEN4_USB3OTG_AHBIF (1 << 7) > +#define PERRSTEN4_USB3OTG_32K (1 << 6) > +#define PERRSTEN4_USB3OTG (1 << 5) > +#define PERRSTEN4_USB3OTGPHY_POR (1 << 3) > + > +#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25) > + > +#define CLKDIV4_SC_SEL_SD_MASK ((7 << 4) << 16) > +#define CLKDIV4_SC_DIV_SD_MASK (0xf << 16) > +#define CLKDIV4_SC_SEL_SD(x) (((x) & 0x7) << 4) > +#define CLKDIV4_SC_DIV_SD(x) ((x) & 0xf) > + > +#define CRG_CLKDIV16_OFFSET 0x0E8 > +#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9) > +#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9) > + > +#define CRG_CLKDIV17_OFFSET 0x0EC > +#define SC_DIV_UFS_PERIBUS (1 << 14) > + > +#define IOMG_MMC0_REG_BASE 0xFF37E000 > +#define IOMG_MMC0_000_REG (IOMG_MMC0_REG_BASE + 0x000) > +#define IOMG_MMC0_001_REG (IOMG_MMC0_REG_BASE + 0x004) > +#define IOMG_MMC0_002_REG (IOMG_MMC0_REG_BASE + 0x008) > +#define IOMG_MMC0_003_REG (IOMG_MMC0_REG_BASE + 0x00C) > +#define IOMG_MMC0_004_REG (IOMG_MMC0_REG_BASE + 0x010) > +#define IOMG_MMC0_005_REG (IOMG_MMC0_REG_BASE + 0x014) > + > +#define IOCG_MMC0_REG_BASE 0xFF37E800 > +#define IOCG_MMC0_000_REG (IOCG_MMC0_REG_BASE + 0x000) > +#define IOCG_MMC0_001_REG (IOCG_MMC0_REG_BASE + 0x004) > +#define IOCG_MMC0_002_REG (IOCG_MMC0_REG_BASE + 0x008) > +#define IOCG_MMC0_003_REG (IOCG_MMC0_REG_BASE + 0x00C) > +#define IOCG_MMC0_004_REG (IOCG_MMC0_REG_BASE + 0x010) > +#define IOCG_MMC0_005_REG (IOCG_MMC0_REG_BASE + 0x014) > + > +#define IOMG_AO_REG_BASE 0xFFF11000 > +#define IOMG_AO_006_REG (IOMG_AO_REG_BASE + 0x018) > + > +#define IOMG_FUNC0 0 > +#define IOMG_FUNC1 1 > +#define IOCG_PULLUP BIT0 > +#define IOCG_PULLDOWN BIT1 > +#define IOCG_DRIVE(x) ((x) << 4) > + > +#define UFS_SYS_REG_BASE 0xFF3B1000 > + > +#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004 > +#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008 > +#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C > +#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010 > +#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014 > +#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018 > +#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C > +#define UFS_SYS_MONITOR_HH_OFFSET 0x03C > +#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C > +#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060 > +#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064 > + > +#define BIT_UFS_PSW_ISO_CTRL (1 << 16) > +#define BIT_UFS_PSW_MTCMOS_EN (1 << 0) > +#define BIT_UFS_REFCLK_ISO_EN (1 << 16) > +#define BIT_UFS_PHY_ISO_CTRL (1 << 0) > +#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16) > +#define BIT_SYSCTRL_PWR_READY (1 << 8) > +#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24) > +#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8) > +#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF) > +#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4) > +#define MASK_UFS_CLK_GATE_BYPASS (0x3F) > +#define BIT_SYSCTRL_LP_RESET_N (1 << 0) > +#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0) > +#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16) > +#define MASK_UFS_DEVICE_RESET (1 << 16) > +#define BIT_UFS_DEVICE_RESET (1 << 0) > + > +#endif /* __HI3660_H__ */ > diff --git a/Silicon/Hisilicon/Hi3660/Include/Hkadc.h b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h > new file mode 100644 > index 000000000000..990c0928eaab > --- /dev/null > +++ b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h This entire file appears to be unused by the code in the current patchset. Please delete it and bring it back in with the code that makes use of it. / Leif > @@ -0,0 +1,68 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#ifndef __HKADC_H__ > +#define __HKADC_H__ > + > +#include <Hi3660.h> > + > +#define HKADC_DSP_START (HKADC_SSI_REG_BASE + 0x000) > +#define DSP_START_BIT BIT0 > + > +#define HKADC_WR_NUM (HKADC_SSI_REG_BASE + 0x008) > +#define HKADC_DSP_START_CLR (HKADC_SSI_REG_BASE + 0x01C) > +#define HKADC_WR01_DATA (HKADC_SSI_REG_BASE + 0x020) > + > +#define WR1_WRITE_MODE BIT31 > +#define WR1_READ_MODE (0 << 31) > +#define WR1_ADDR(x) (((x) & 0x7F) << 24) > +#define WR1_DATA(x) (((x) & 0xFF) << 16) > +#define WR0_WRITE_MODE BIT15 > +#define WR0_READ_MODE (0 << 15) > +#define WR0_ADDR(x) (((x) & 0x7F) << 8) > +#define WR0_DATA(x) ((x) & 0xFF) > + > +#define HKADC_WR23_DATA (HKADC_SSI_REG_BASE + 0x024) > +#define HKADC_WR45_DATA (HKADC_SSI_REG_BASE + 0x028) > +#define HKADC_DELAY01 (HKADC_SSI_REG_BASE + 0x030) > +#define HKADC_DELAY23 (HKADC_SSI_REG_BASE + 0x034) > +#define HKADC_DELAY45 (HKADC_SSI_REG_BASE + 0x038) > +#define HKADC_DSP_RD2_DATA (HKADC_SSI_REG_BASE + 0x048) > +#define HKADC_DSP_RD3_DATA (HKADC_SSI_REG_BASE + 0x04C) > + > +// HKADC Internal Registers > +#define HKADC_CTRL_ADDR 0x00 > +#define HKADC_START_ADDR 0x01 > +#define HKADC_DATA1_ADDR 0x03 // high 8 bits > +#define HKADC_DATA0_ADDR 0x04 // low 8 bits > +#define HKADC_MODE_CFG 0x0A > + > +#define HKADC_VALUE_HIGH 0x0FF0 > +#define HKADC_VALUE_LOW 0x000F > +#define HKADC_VALID_VALUE 0x0FFF > + > +#define HKADC_CHANNEL_MAX 15 > +#define HKADC_VREF_1V8 1800 > +#define HKADC_ACCURACY 0x0FFF > + > +#define HKADC_WR01_VALUE ((HKADC_START_ADDR << 24) | (0x1 << 16)) > +#define HKADC_WR23_VALUE ((0x1 << 31) | (HKADC_DATA0_ADDR << 24) | (1 << 15) | (HKADC_DATA1_ADDR << 8)) > +#define HKADC_WR45_VALUE (0x80) > +#define HKADC_CHANNEL0_DELAY01_VALUE ((0x0700 << 16) | 0xFFFF) > +#define HKADC_DELAY01_VALUE ((0x0700 << 16) | 0x0200) > +#define HKADC_DELAY23_VALUE ((0x00C8 << 16) | 0x00C8) > +#define START_DELAY_TIMEOUT 2000 > +#define HKADC_WR_NUM_VALUE 4 > + > +#endif /* __HKADC_H__ */ > -- > 2.7.4 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
>> +STATIC >> +VOID >> +OnEndOfDxe ( >> + IN EFI_EVENT Event, >> + IN VOID *Context >> + ) >> +{ >> + UINT32 BootMode; >> + >> + BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK; >> + if (BootMode == BOOT_MODE_RECOVERY) { >> + SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48); >> + SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57); > > I commented on v1: > --- > 1) Why this use of SerialPortWrite instead of Print? > 2) This cast to (UINT8 *) works by accident. Please don't do this. > 3) Please _never_ use hand-coded values for compile-time determined > (and known) information. In this case the output string length. > --- > Please change to Print(). > I can't use Print() at here since console isn't ready. The OnEndOfDxe() is executed before console ready. SerialPortWrite () is the only choice to me. I'll fix other issues with comments. Best Regards Haojian _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc index 3da1b8556321..6cc1c1edf453 100644 --- a/Platform/Hisilicon/HiKey960/HiKey960.dsc +++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc @@ -182,6 +182,8 @@ [Components.common] Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf + Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf + # # USB Host Support # diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf index 162dbaaf2646..b7d70b010598 100644 --- a/Platform/Hisilicon/HiKey960/HiKey960.fdf +++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf @@ -123,6 +123,8 @@ [FV.FvMain] INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf + INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf + # # USB Host Support # diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c new file mode 100644 index 000000000000..fae68feca89d --- /dev/null +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c @@ -0,0 +1,186 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include "HiKey960Dxe.h" + +STATIC +VOID +InitSdCard ( + IN VOID + ) +{ + UINT32 Data; + + // + // LDO16 + // 000: 1.75V, 001: 1.8V, 010: 2.4V, 011: 2.6V, 100: 2.7V, + // 101: 2.85V, 110: 2.95V, 111: 3.0V. + // + Data = MmioRead32 (PMIC_LDO16_VSET_REG) & LDO16_VSET_MASK; + Data |= 6; + MmioWrite32 (PMIC_LDO16_VSET_REG, Data); + MmioOr32 (PMIC_LDO16_ONOFF_ECO_REG, LDO16_ONOFF_ECO_LDO16_ENABLE); + // + // wait regulator stable + // + MicroSecondDelay (100); + + // + // LDO9 + // 000: 1.75V, 001: 1.8V, 010: 1.825V, 011: 2.8V, 100: 2.85V, + // 101: 2.95V, 110: 3.0V, 111: 3.3V. + // + Data = MmioRead32 (PMIC_LDO9_VSET_REG) & LDO9_VSET_MASK; + Data |= 5; + MmioWrite32 (PMIC_LDO9_VSET_REG, Data); + MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2); + // + // wait regulator stable + // + MicroSecondDelay (100); + + // + // GPIO203 + // + MmioWrite32 (IOMG_AO_REG_BASE + (24 << 2), 0); // GPIO function + + // + // SD pinmux + // + MmioWrite32 (IOMG_MMC0_000_REG, IOMG_FUNC1); // SD_CLK + MmioWrite32 (IOMG_MMC0_001_REG, IOMG_FUNC1); // SD_CMD + MmioWrite32 (IOMG_MMC0_002_REG, IOMG_FUNC1); // SD_DATA0 + MmioWrite32 (IOMG_MMC0_003_REG, IOMG_FUNC1); // SD_DATA1 + MmioWrite32 (IOMG_MMC0_004_REG, IOMG_FUNC1); // SD_DATA2 + MmioWrite32 (IOMG_MMC0_005_REG, IOMG_FUNC1); // SD_DATA3 + MmioWrite32 (IOCG_MMC0_000_REG, IOCG_DRIVE (15)); // SD_CLK float with 32mA + MmioWrite32 (IOCG_MMC0_001_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_CMD + MmioWrite32 (IOCG_MMC0_002_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA0 + MmioWrite32 (IOCG_MMC0_003_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA1 + MmioWrite32 (IOCG_MMC0_004_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA2 + MmioWrite32 (IOCG_MMC0_005_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA3 + + // + // SC_SEL_SD: + // 0xx: 3.2MHz, 100: PPLL0, 101: PPLL1, 11x: PPLL2. + // SC_DIV_SD: + // divider = value + 1 + // + do { + MmioOr32 ( + CRG_CLKDIV4, CLKDIV4_SC_SEL_SD (4) | CLKDIV4_SC_SEL_SD_MASK | + CLKDIV4_SC_DIV_SD (0) | CLKDIV4_SC_DIV_SD_MASK + ); + Data = MmioRead32 (CRG_CLKDIV4) & + (CLKDIV4_SC_SEL_SD_MASK | CLKDIV4_SC_DIV_SD_MASK); + } while (Data != (CLKDIV4_SC_SEL_SD (4) | CLKDIV4_SC_DIV_SD (0))); + + // + // Unreset SD controller + // + MmioWrite32 (CRG_PERRSTDIS4, PERRSTEN4_SD); + do { + Data = MmioRead32 (CRG_PERRSTSTAT4); + } while ((Data & PERRSTEN4_SD) == PERRSTEN4_SD); + // + // Enable SD controller clock + // + MmioOr32 (CRG_PEREN0, PEREN0_GT_HCLK_SD); + MmioOr32 (CRG_PEREN4, PEREN4_GT_CLK_SD); + do { + Data = MmioRead32 (CRG_PERCLKEN4); + } while ((Data & PEREN4_GT_CLK_SD) != PEREN4_GT_CLK_SD); +} + +VOID +InitPeripherals ( + IN VOID + ) +{ + // + // Enable FPLL0 + // + MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN); + + InitSdCard (); + + // + // Enable wifi clock + // + MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK); + MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K); +} + +/** + Notification function of the event defined as belonging to the + EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in + the entry point of the driver. + + This function is called when an event belonging to the + EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an + event is signalled once at the end of the dispatching of all + drivers (end of the so called DXE phase). + + @param[in] Event Event declared in the entry point of the driver whose + notification function is being invoked. + @param[in] Context NULL +**/ +STATIC +VOID +OnEndOfDxe ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + UINT32 BootMode; + + BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK; + if (BootMode == BOOT_MODE_RECOVERY) { + SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48); + SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57); + } +} + +EFI_STATUS +EFIAPI +HiKey960EntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + EFI_EVENT EndOfDxeEvent; + + InitPeripherals (); + + // + // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. + // The "OnEndOfDxe()" function is declared as the call back function. + // It will be called at the end of the DXE phase when an event of the + // same group is signalled to inform about the end of the DXE phase. + // Install the INSTALL_FDT_PROTOCOL protocol. + // + Status = gBS->CreateEventEx ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + OnEndOfDxe, + NULL, + &gEfiEndOfDxeEventGroupGuid, + &EndOfDxeEvent + ); + if (EFI_ERROR (Status)) { + return Status; + } + return Status; +} diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h new file mode 100644 index 000000000000..2e89d10e2723 --- /dev/null +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h @@ -0,0 +1,91 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HIKEY960DXE_H__ +#define __HIKEY960DXE_H__ + +#include <Guid/EventGroup.h> + +#include <Hi3660.h> +#include <Hkadc.h> + +#include <Library/BaseLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/CacheMaintenanceLib.h> +#include <Library/DebugLib.h> +#include <Library/DevicePathLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/IoLib.h> +#include <Library/PcdLib.h> +#include <Library/PrintLib.h> +#include <Library/SerialPortLib.h> +#include <Library/TimerLib.h> +#include <Library/UefiBootServicesTableLib.h> + +#define ADC_ADCIN0 0 +#define ADC_ADCIN1 1 +#define ADC_ADCIN2 2 + +#define HKADC_DATA_GRADE0 0 +#define HKADC_DATA_GRADE1 100 +#define HKADC_DATA_GRADE2 300 +#define HKADC_DATA_GRADE3 500 +#define HKADC_DATA_GRADE4 700 +#define HKADC_DATA_GRADE5 900 +#define HKADC_DATA_GRADE6 1100 +#define HKADC_DATA_GRADE7 1300 +#define HKADC_DATA_GRADE8 1500 +#define HKADC_DATA_GRADE9 1700 +#define HKADC_DATA_GRADE10 1800 + +#define BOARDID_VALUE0 0 +#define BOARDID_VALUE1 1 +#define BOARDID_VALUE2 2 +#define BOARDID_VALUE3 3 +#define BOARDID_VALUE4 4 +#define BOARDID_VALUE5 5 +#define BOARDID_VALUE6 6 +#define BOARDID_VALUE7 7 +#define BOARDID_VALUE8 8 +#define BOARDID_VALUE9 9 +#define BOARDID_UNKNOWN 0xF + +#define BOARDID3_BASE 5 + +#define HIKEY960_BOARDID_V1 5300 +#define HIKEY960_BOARDID_V2 5301 + +#define HIKEY960_COMPATIBLE_LEDS_V1 "gpio-leds_v1" +#define HIKEY960_COMPATIBLE_LEDS_V2 "gpio-leds_v2" +#define HIKEY960_COMPATIBLE_HUB_V1 "hisilicon,gpio_hubv1" +#define HIKEY960_COMPATIBLE_HUB_V2 "hisilicon,gpio_hubv2" + +#define ADB_REBOOT_ADDRESS 0x32100000 +#define ADB_REBOOT_BOOTLOADER 0x77665500 +#define ADB_REBOOT_NONE 0x77665501 + +#define DETECT_SW_FASTBOOT 68 // GPIO8_4 + +enum { + BOOT_MODE_RECOVERY = 0, + BOOT_MODE_NORMAL, + BOOT_MODE_MASK = 1, +}; + +typedef struct { + UINTN DataGrade; + UINTN BoardidValue; +} HKADC_DATA; + +#endif /* __HIKEY960DXE_H__ */ diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf new file mode 100644 index 000000000000..a1a7d005ce8b --- /dev/null +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf @@ -0,0 +1,47 @@ +# +# Copyright (c) 2018, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +[Defines] + INF_VERSION = 0x0001001a + BASE_NAME = HiKey960Dxe + FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = HiKey960EntryPoint + +[Sources.common] + HiKey960Dxe.c + +[Packages] + EmbeddedPkg/EmbeddedPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + Silicon/Hisilicon/Hi3660/Hi3660.dec + +[LibraryClasses] + BaseMemoryLib + CacheMaintenanceLib + DxeServicesTableLib + IoLib + PcdLib + TimerLib + UefiDriverEntryPoint + UefiLib + +[Protocols] + gEmbeddedGpioProtocolGuid + +[Guids] + gEfiEndOfDxeEventGroupGuid + +[Depex] + TRUE diff --git a/Silicon/Hisilicon/Hi3660/Hi3660.dec b/Silicon/Hisilicon/Hi3660/Hi3660.dec new file mode 100644 index 000000000000..5c69ac4f19b8 --- /dev/null +++ b/Silicon/Hisilicon/Hi3660/Hi3660.dec @@ -0,0 +1,32 @@ +# +# Copyright (c) 2018, Linaro Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +[Defines] + DEC_SPECIFICATION = 0x0001001a + PACKAGE_NAME = Hi3660 + PACKAGE_GUID = e457ba7c-faba-4dea-b274-f5962d016c79 + PACKAGE_VERSION = 0.1 + +################################################################################ +# +# Include Section - list of Include Paths that are provided by this package. +# Comments are used for Keywords and Module Types. +# +# Supported Module Types: +# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION +# +################################################################################ +[Includes.common] + Include # Root include for the package + +[Guids.common] + gHi3660TokenSpaceGuid = { 0x4abc73fa, 0x8a49, 0x4d2c, { 0x95, 0x44, 0x17, 0x87, 0x29, 0x06, 0x20, 0xb4 } } diff --git a/Silicon/Hisilicon/Hi3660/Include/Hi3660.h b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h new file mode 100644 index 000000000000..ca07a4dd1b81 --- /dev/null +++ b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h @@ -0,0 +1,194 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HI3660_H__ +#define __HI3660_H__ + +#define HKADC_SSI_REG_BASE 0xE82B8000 + +#define PCTRL_REG_BASE 0xE8A09000 + +#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010) +#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064) + +#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1) +#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25) + +#define SCTRL_REG_BASE 0xFFF0A000 + +#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120) +#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0) + +#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C) + +#define USB3OTG_BC_REG_BASE 0xFF200000 + +#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000) +#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008) +#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C) +#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010) +#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018) +#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C) +#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050) +#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054) + +#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15) +#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1) +#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0) +#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6) +#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5) +#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16) +#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1) +#define USB3OTG_PHY_CR_ACK (1 << 0) +#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4) +#define USB3OTG_PHY_CR_WRITE (1 << 3) +#define USB3OTG_PHY_CR_READ (1 << 2) +#define USB3OTG_PHY_CR_CAP_DATA (1 << 1) +#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0) + +#define PMU_REG_BASE 0xFFF34000 +#define PMIC_LDO9_VSET_REG (PMU_REG_BASE + (0x068 << 2)) +#define LDO9_VSET_MASK (7 << 0) + +#define PMIC_LDO16_ONOFF_ECO_REG (PMU_REG_BASE + (0x078 << 2)) +#define LDO16_ONOFF_ECO_LDO16_ENABLE BIT1 +#define LDO16_ONOFF_ECO_ECO_ENABLE BIT0 + +#define PMIC_LDO16_VSET_REG (PMU_REG_BASE + (0x079 << 2)) +#define LDO16_VSET_MASK (7 << 0) + +#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2)) +#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2)) + +#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5) +#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1) + + +#define CRG_REG_BASE 0xFFF35000 + +#define CRG_PEREN0 (CRG_REG_BASE + 0x000) +#define CRG_PEREN2 (CRG_REG_BASE + 0x020) +#define CRG_PERDIS2 (CRG_REG_BASE + 0x024) +#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028) +#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C) +#define CRG_PEREN4 (CRG_REG_BASE + 0x040) +#define CRG_PERDIS4 (CRG_REG_BASE + 0x044) +#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048) +#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C) +#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078) +#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C) +#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080) +#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084) +#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088) +#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C) +#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090) +#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094) +#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098) +#define CRG_CLKDIV4 (CRG_REG_BASE + 0x0B8) +#define CRG_ISOEN (CRG_REG_BASE + 0x144) +#define CRG_ISODIS (CRG_REG_BASE + 0x148) +#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C) + +#define PERI_UFS_BIT (1 << 12) +#define PERI_ARST_UFS_BIT (1 << 7) + +#define PEREN0_GT_HCLK_SD BIT30 + +#define PEREN2_HKADCSSI BIT24 + +#define PEREN4_GT_CLK_SD BIT17 +#define PEREN4_GT_ACLK_USB3OTG (1 << 1) +#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0) + +#define PERRSTEN2_HKADCSSI BIT24 + +#define PERRSTEN4_SD BIT18 + +#define PERRSTEN4_USB3OTG_MUX (1 << 8) +#define PERRSTEN4_USB3OTG_AHBIF (1 << 7) +#define PERRSTEN4_USB3OTG_32K (1 << 6) +#define PERRSTEN4_USB3OTG (1 << 5) +#define PERRSTEN4_USB3OTGPHY_POR (1 << 3) + +#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25) + +#define CLKDIV4_SC_SEL_SD_MASK ((7 << 4) << 16) +#define CLKDIV4_SC_DIV_SD_MASK (0xf << 16) +#define CLKDIV4_SC_SEL_SD(x) (((x) & 0x7) << 4) +#define CLKDIV4_SC_DIV_SD(x) ((x) & 0xf) + +#define CRG_CLKDIV16_OFFSET 0x0E8 +#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9) +#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9) + +#define CRG_CLKDIV17_OFFSET 0x0EC +#define SC_DIV_UFS_PERIBUS (1 << 14) + +#define IOMG_MMC0_REG_BASE 0xFF37E000 +#define IOMG_MMC0_000_REG (IOMG_MMC0_REG_BASE + 0x000) +#define IOMG_MMC0_001_REG (IOMG_MMC0_REG_BASE + 0x004) +#define IOMG_MMC0_002_REG (IOMG_MMC0_REG_BASE + 0x008) +#define IOMG_MMC0_003_REG (IOMG_MMC0_REG_BASE + 0x00C) +#define IOMG_MMC0_004_REG (IOMG_MMC0_REG_BASE + 0x010) +#define IOMG_MMC0_005_REG (IOMG_MMC0_REG_BASE + 0x014) + +#define IOCG_MMC0_REG_BASE 0xFF37E800 +#define IOCG_MMC0_000_REG (IOCG_MMC0_REG_BASE + 0x000) +#define IOCG_MMC0_001_REG (IOCG_MMC0_REG_BASE + 0x004) +#define IOCG_MMC0_002_REG (IOCG_MMC0_REG_BASE + 0x008) +#define IOCG_MMC0_003_REG (IOCG_MMC0_REG_BASE + 0x00C) +#define IOCG_MMC0_004_REG (IOCG_MMC0_REG_BASE + 0x010) +#define IOCG_MMC0_005_REG (IOCG_MMC0_REG_BASE + 0x014) + +#define IOMG_AO_REG_BASE 0xFFF11000 +#define IOMG_AO_006_REG (IOMG_AO_REG_BASE + 0x018) + +#define IOMG_FUNC0 0 +#define IOMG_FUNC1 1 +#define IOCG_PULLUP BIT0 +#define IOCG_PULLDOWN BIT1 +#define IOCG_DRIVE(x) ((x) << 4) + +#define UFS_SYS_REG_BASE 0xFF3B1000 + +#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004 +#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008 +#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C +#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010 +#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014 +#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018 +#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C +#define UFS_SYS_MONITOR_HH_OFFSET 0x03C +#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C +#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060 +#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064 + +#define BIT_UFS_PSW_ISO_CTRL (1 << 16) +#define BIT_UFS_PSW_MTCMOS_EN (1 << 0) +#define BIT_UFS_REFCLK_ISO_EN (1 << 16) +#define BIT_UFS_PHY_ISO_CTRL (1 << 0) +#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16) +#define BIT_SYSCTRL_PWR_READY (1 << 8) +#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24) +#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8) +#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF) +#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4) +#define MASK_UFS_CLK_GATE_BYPASS (0x3F) +#define BIT_SYSCTRL_LP_RESET_N (1 << 0) +#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0) +#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16) +#define MASK_UFS_DEVICE_RESET (1 << 16) +#define BIT_UFS_DEVICE_RESET (1 << 0) + +#endif /* __HI3660_H__ */ diff --git a/Silicon/Hisilicon/Hi3660/Include/Hkadc.h b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h new file mode 100644 index 000000000000..990c0928eaab --- /dev/null +++ b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h @@ -0,0 +1,68 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HKADC_H__ +#define __HKADC_H__ + +#include <Hi3660.h> + +#define HKADC_DSP_START (HKADC_SSI_REG_BASE + 0x000) +#define DSP_START_BIT BIT0 + +#define HKADC_WR_NUM (HKADC_SSI_REG_BASE + 0x008) +#define HKADC_DSP_START_CLR (HKADC_SSI_REG_BASE + 0x01C) +#define HKADC_WR01_DATA (HKADC_SSI_REG_BASE + 0x020) + +#define WR1_WRITE_MODE BIT31 +#define WR1_READ_MODE (0 << 31) +#define WR1_ADDR(x) (((x) & 0x7F) << 24) +#define WR1_DATA(x) (((x) & 0xFF) << 16) +#define WR0_WRITE_MODE BIT15 +#define WR0_READ_MODE (0 << 15) +#define WR0_ADDR(x) (((x) & 0x7F) << 8) +#define WR0_DATA(x) ((x) & 0xFF) + +#define HKADC_WR23_DATA (HKADC_SSI_REG_BASE + 0x024) +#define HKADC_WR45_DATA (HKADC_SSI_REG_BASE + 0x028) +#define HKADC_DELAY01 (HKADC_SSI_REG_BASE + 0x030) +#define HKADC_DELAY23 (HKADC_SSI_REG_BASE + 0x034) +#define HKADC_DELAY45 (HKADC_SSI_REG_BASE + 0x038) +#define HKADC_DSP_RD2_DATA (HKADC_SSI_REG_BASE + 0x048) +#define HKADC_DSP_RD3_DATA (HKADC_SSI_REG_BASE + 0x04C) + +// HKADC Internal Registers +#define HKADC_CTRL_ADDR 0x00 +#define HKADC_START_ADDR 0x01 +#define HKADC_DATA1_ADDR 0x03 // high 8 bits +#define HKADC_DATA0_ADDR 0x04 // low 8 bits +#define HKADC_MODE_CFG 0x0A + +#define HKADC_VALUE_HIGH 0x0FF0 +#define HKADC_VALUE_LOW 0x000F +#define HKADC_VALID_VALUE 0x0FFF + +#define HKADC_CHANNEL_MAX 15 +#define HKADC_VREF_1V8 1800 +#define HKADC_ACCURACY 0x0FFF + +#define HKADC_WR01_VALUE ((HKADC_START_ADDR << 24) | (0x1 << 16)) +#define HKADC_WR23_VALUE ((0x1 << 31) | (HKADC_DATA0_ADDR << 24) | (1 << 15) | (HKADC_DATA1_ADDR << 8)) +#define HKADC_WR45_VALUE (0x80) +#define HKADC_CHANNEL0_DELAY01_VALUE ((0x0700 << 16) | 0xFFFF) +#define HKADC_DELAY01_VALUE ((0x0700 << 16) | 0x0200) +#define HKADC_DELAY23_VALUE ((0x00C8 << 16) | 0x00C8) +#define START_DELAY_TIMEOUT 2000 +#define HKADC_WR_NUM_VALUE 4 + +#endif /* __HKADC_H__ */
Do some basic initliazation on peripherals, such as pins and regulators. Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- Platform/Hisilicon/HiKey960/HiKey960.dsc | 2 + Platform/Hisilicon/HiKey960/HiKey960.fdf | 2 + .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 186 ++++++++++++++++++++ .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 91 ++++++++++ .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 47 +++++ Silicon/Hisilicon/Hi3660/Hi3660.dec | 32 ++++ Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 194 +++++++++++++++++++++ Silicon/Hisilicon/Hi3660/Include/Hkadc.h | 68 ++++++++ 8 files changed, 622 insertions(+) create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf create mode 100644 Silicon/Hisilicon/Hi3660/Hi3660.dec create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hkadc.h -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel