| Message ID | 1527122790-23592-6-git-send-email-haojian.zhuang@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | enable virtual keyboards | expand |
On Thu, May 24, 2018 at 08:46:29AM +0800, Haojian Zhuang wrote: > Do some basic initialization on HiKey platform, such as pin > setting, regulators and making peripherals out of reset mode. > > Cc: Leif Lindholm <leif.lindholm@linaro.org> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > Platform/Hisilicon/HiKey/HiKey.dsc | 3 + > Platform/Hisilicon/HiKey/HiKey.fdf | 3 + > Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 40 ++++++++ > Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h | 31 ++++++ > Silicon/Hisilicon/Hi6220/Include/Hi6220.h | 6 ++ > Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 50 ++++++++++ > Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 102 ++++++++++++++++++++ > 7 files changed, 235 insertions(+) > > diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc > index 5c1604d7f689..5cc4ff27f01b 100644 > --- a/Platform/Hisilicon/HiKey/HiKey.dsc > +++ b/Platform/Hisilicon/HiKey/HiKey.dsc > @@ -189,8 +189,11 @@ [Components.common] > # > # GPIO > # > + Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf > ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf > > + Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf > + > # > # MMC/SD > # > diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf > index 2a5c5a4d6e79..39020d27dbcd 100644 > --- a/Platform/Hisilicon/HiKey/HiKey.fdf > +++ b/Platform/Hisilicon/HiKey/HiKey.fdf > @@ -120,8 +120,11 @@ [FV.FvMain] > # > # GPIO > # > + INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf > INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf > > + INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf > + > # > # Multimedia Card Interface > # > diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf > new file mode 100644 > index 000000000000..34734391b45a > --- /dev/null > +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf > @@ -0,0 +1,40 @@ > +# > +# Copyright (c) 2013 - 2014, ARM Ltd. All rights reserved. > +# Copyright (c) 2018, Linaro Ltd. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > + > +[Defines] > + INF_VERSION = 0x0001001a > + BASE_NAME = HiKeyDxe > + FILE_GUID = f567684b-1089-4214-8881-d64b20cbda2f > + MODULE_TYPE = DXE_DRIVER > + VERSION_STRING = 1.0 > + ENTRY_POINT = HiKeyEntryPoint > + > +[Sources.common] > + HiKeyDxe.c > + > +[Packages] > + EmbeddedPkg/EmbeddedPkg.dec > + MdeModulePkg/MdeModulePkg.dec > + MdePkg/MdePkg.dec > + > +[LibraryClasses] > + DebugLib > + IoLib > + UefiLib > + UefiDriverEntryPoint > + > +[Guids] > + gEfiEndOfDxeEventGroupGuid > + > +[Depex] > + TRUE > diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h > new file mode 100644 > index 000000000000..07f9ae6a949a > --- /dev/null > +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h > @@ -0,0 +1,31 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#ifndef __HIKEYDXE_H__ > +#define __HIKEYDXE_H__ > + > +#include <Library/DebugLib.h> > +#include <Library/IoLib.h> > +#include <Library/UefiLib.h> > + > +#include <Hi6220.h> > +#include <Hi6220RegsPeri.h> Like 2/6 please include only files needed by declarations in the .h file itself, let the .c file make its own includes. / Leif > + > +#define DETECT_J15_FASTBOOT 24 // GPIO3_0 > + > +#define ADB_REBOOT_ADDRESS 0x05F01000 > +#define ADB_REBOOT_BOOTLOADER 0x77665500 > +#define ADB_REBOOT_NONE 0x77665501 > + > +#endif /* __HIKEYDXE_H__ */ > diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h > index 203424adfc8b..9b2508955772 100644 > --- a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h > +++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h > @@ -23,6 +23,12 @@ > #define HI6220_PERIPH_BASE 0xF4000000 > #define HI6220_PERIPH_SZ 0x05800000 > > +#define IOMG_BASE 0xF7010000 > +#define IOMG_080_REG (IOMG_BASE + 0x140) > + > +#define IOCG_BASE 0xF7010800 > +#define IOCG_084_REG (IOCG_BASE + 0x150) > + > #define PERI_CTRL_BASE 0xF7030000 > #define SC_PERIPH_CTRL4 0x00C > #define CTRL4_FPGA_EXT_PHY_SEL BIT3 > diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h > new file mode 100644 > index 000000000000..0db8af37d2d0 > --- /dev/null > +++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h > @@ -0,0 +1,50 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#ifndef __HI6220_REGS_PERI_H__ > +#define __HI6220_REGS_PERI_H__ > + > +#define SC_PERIPH_CLKEN3 0x230 > +#define SC_PERIPH_RSTEN3 0x330 > +#define SC_PERIPH_RSTDIS0 0x304 > +#define SC_PERIPH_RSTDIS3 0x334 > +#define SC_PERIPH_RSTSTAT3 0x338 > + > +/* SC_PERIPH_RSTEN0/RSTDIS0/RSTSTAT0 */ > +#define PERIPH_RST0_MMC2 (1 << 2) > + > +/* SC_PERIPH_RSTEN3/RSTDIS3/RSTSTAT3 */ > +#define PERIPH_RST3_CSSYS (1 << 0) > +#define PERIPH_RST3_I2C0 (1 << 1) > +#define PERIPH_RST3_I2C1 (1 << 2) > +#define PERIPH_RST3_I2C2 (1 << 3) > +#define PERIPH_RST3_I2C3 (1 << 4) > +#define PERIPH_RST3_UART1 (1 << 5) > +#define PERIPH_RST3_UART2 (1 << 6) > +#define PERIPH_RST3_UART3 (1 << 7) > +#define PERIPH_RST3_UART4 (1 << 8) > +#define PERIPH_RST3_SSP (1 << 9) > +#define PERIPH_RST3_PWM (1 << 10) > +#define PERIPH_RST3_BLPWM (1 << 11) > +#define PERIPH_RST3_TSENSOR (1 << 12) > +#define PERIPH_RST3_DAPB (1 << 18) > +#define PERIPH_RST3_HKADC (1 << 19) > +#define PERIPH_RST3_CODEC_SSI (1 << 20) > +#define PERIPH_RST3_PMUSSI1 (1 << 22) > + > +#define PMUSSI_REG(x) (PMUSSI_BASE + ((x) << 2)) > +#define PMUSSI_ONOFF8_REG (PMUSSI_BASE + (0x1c << 2)) > +#define PMUSSI_ONOFF8_EN_32KB BIT6 > + > +#endif /* __HI6220_REGS_PERI_H__ */ > diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c > new file mode 100644 > index 000000000000..b812f8bd483d > --- /dev/null > +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c > @@ -0,0 +1,102 @@ > +/** @file > +* > +* Copyright (c) 2018, Linaro Ltd. All rights reserved. > +* > +* This program and the accompanying materials > +* are licensed and made available under the terms and conditions of the BSD License > +* which accompanies this distribution. The full text of the license may be found at > +* http://opensource.org/licenses/bsd-license.php > +* > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +* > +**/ > + > +#include "HiKeyDxe.h" > + > +STATIC > +VOID > +UartInit ( > + IN VOID > + ) > +{ > + UINT32 Val; > + > + /* make UART1 out of reset */ > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART1); > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART1); > + /* make UART2 out of reset */ > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART2); > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART2); > + /* make UART3 out of reset */ > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART3); > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART3); > + /* make UART4 out of reset */ > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART4); > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART4); > + > + /* make DW_MMC2 out of reset */ > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, PERIPH_RST0_MMC2); > + > + /* enable clock for BT/WIFI */ > + Val = MmioRead32 (PMUSSI_ONOFF8_REG) | PMUSSI_ONOFF8_EN_32KB; > + MmioWrite32 (PMUSSI_ONOFF8_REG, Val); > +} > + > +STATIC > +VOID > +MtcmosInit ( > + IN VOID > + ) > +{ > + UINT32 Data; > + > + /* enable MTCMOS for GPU */ > + MmioWrite32 (AO_CTRL_BASE + SC_PW_MTCMOS_EN0, PW_EN0_G3D); > + do { > + Data = MmioRead32 (AO_CTRL_BASE + SC_PW_MTCMOS_ACK_STAT0); > + } while ((Data & PW_EN0_G3D) == 0); > +} > + > +EFI_STATUS > +HiKeyInitPeripherals ( > + IN VOID > + ) > +{ > + UINT32 Data, Bits; > + > + /* make I2C0/I2C1/I2C2/SPI0 out of reset */ > + Bits = PERIPH_RST3_I2C0 | PERIPH_RST3_I2C1 | PERIPH_RST3_I2C2 | \ > + PERIPH_RST3_SSP; > + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, Bits); > + > + do { > + Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT3); > + } while (Data & Bits); > + > + UartInit (); > + /* MTCMOS -- Multi-threshold CMOS */ > + MtcmosInit (); > + > + /* Set DETECT_J15_FASTBOOT (GPIO24) pin as GPIO function */ > + MmioWrite32 (IOCG_084_REG, 0); /* configure GPIO24 as nopull */ > + MmioWrite32 (IOMG_080_REG, 0); /* configure GPIO24 as GPIO */ > + > + return EFI_SUCCESS; > +} > + > +EFI_STATUS > +EFIAPI > +HiKeyEntryPoint ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + > + Status = HiKeyInitPeripherals (); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + return Status; > +} > -- > 2.7.4 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc index 5c1604d7f689..5cc4ff27f01b 100644 --- a/Platform/Hisilicon/HiKey/HiKey.dsc +++ b/Platform/Hisilicon/HiKey/HiKey.dsc @@ -189,8 +189,11 @@ [Components.common] # # GPIO # + Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf + Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf + # # MMC/SD # diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf index 2a5c5a4d6e79..39020d27dbcd 100644 --- a/Platform/Hisilicon/HiKey/HiKey.fdf +++ b/Platform/Hisilicon/HiKey/HiKey.fdf @@ -120,8 +120,11 @@ [FV.FvMain] # # GPIO # + INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf + INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf + # # Multimedia Card Interface # diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf new file mode 100644 index 000000000000..34734391b45a --- /dev/null +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf @@ -0,0 +1,40 @@ +# +# Copyright (c) 2013 - 2014, ARM Ltd. All rights reserved. +# Copyright (c) 2018, Linaro Ltd. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +[Defines] + INF_VERSION = 0x0001001a + BASE_NAME = HiKeyDxe + FILE_GUID = f567684b-1089-4214-8881-d64b20cbda2f + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = HiKeyEntryPoint + +[Sources.common] + HiKeyDxe.c + +[Packages] + EmbeddedPkg/EmbeddedPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + +[LibraryClasses] + DebugLib + IoLib + UefiLib + UefiDriverEntryPoint + +[Guids] + gEfiEndOfDxeEventGroupGuid + +[Depex] + TRUE diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h new file mode 100644 index 000000000000..07f9ae6a949a --- /dev/null +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h @@ -0,0 +1,31 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HIKEYDXE_H__ +#define __HIKEYDXE_H__ + +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/UefiLib.h> + +#include <Hi6220.h> +#include <Hi6220RegsPeri.h> + +#define DETECT_J15_FASTBOOT 24 // GPIO3_0 + +#define ADB_REBOOT_ADDRESS 0x05F01000 +#define ADB_REBOOT_BOOTLOADER 0x77665500 +#define ADB_REBOOT_NONE 0x77665501 + +#endif /* __HIKEYDXE_H__ */ diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h index 203424adfc8b..9b2508955772 100644 --- a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h +++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h @@ -23,6 +23,12 @@ #define HI6220_PERIPH_BASE 0xF4000000 #define HI6220_PERIPH_SZ 0x05800000 +#define IOMG_BASE 0xF7010000 +#define IOMG_080_REG (IOMG_BASE + 0x140) + +#define IOCG_BASE 0xF7010800 +#define IOCG_084_REG (IOCG_BASE + 0x150) + #define PERI_CTRL_BASE 0xF7030000 #define SC_PERIPH_CTRL4 0x00C #define CTRL4_FPGA_EXT_PHY_SEL BIT3 diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h new file mode 100644 index 000000000000..0db8af37d2d0 --- /dev/null +++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h @@ -0,0 +1,50 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __HI6220_REGS_PERI_H__ +#define __HI6220_REGS_PERI_H__ + +#define SC_PERIPH_CLKEN3 0x230 +#define SC_PERIPH_RSTEN3 0x330 +#define SC_PERIPH_RSTDIS0 0x304 +#define SC_PERIPH_RSTDIS3 0x334 +#define SC_PERIPH_RSTSTAT3 0x338 + +/* SC_PERIPH_RSTEN0/RSTDIS0/RSTSTAT0 */ +#define PERIPH_RST0_MMC2 (1 << 2) + +/* SC_PERIPH_RSTEN3/RSTDIS3/RSTSTAT3 */ +#define PERIPH_RST3_CSSYS (1 << 0) +#define PERIPH_RST3_I2C0 (1 << 1) +#define PERIPH_RST3_I2C1 (1 << 2) +#define PERIPH_RST3_I2C2 (1 << 3) +#define PERIPH_RST3_I2C3 (1 << 4) +#define PERIPH_RST3_UART1 (1 << 5) +#define PERIPH_RST3_UART2 (1 << 6) +#define PERIPH_RST3_UART3 (1 << 7) +#define PERIPH_RST3_UART4 (1 << 8) +#define PERIPH_RST3_SSP (1 << 9) +#define PERIPH_RST3_PWM (1 << 10) +#define PERIPH_RST3_BLPWM (1 << 11) +#define PERIPH_RST3_TSENSOR (1 << 12) +#define PERIPH_RST3_DAPB (1 << 18) +#define PERIPH_RST3_HKADC (1 << 19) +#define PERIPH_RST3_CODEC_SSI (1 << 20) +#define PERIPH_RST3_PMUSSI1 (1 << 22) + +#define PMUSSI_REG(x) (PMUSSI_BASE + ((x) << 2)) +#define PMUSSI_ONOFF8_REG (PMUSSI_BASE + (0x1c << 2)) +#define PMUSSI_ONOFF8_EN_32KB BIT6 + +#endif /* __HI6220_REGS_PERI_H__ */ diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c new file mode 100644 index 000000000000..b812f8bd483d --- /dev/null +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c @@ -0,0 +1,102 @@ +/** @file +* +* Copyright (c) 2018, Linaro Ltd. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include "HiKeyDxe.h" + +STATIC +VOID +UartInit ( + IN VOID + ) +{ + UINT32 Val; + + /* make UART1 out of reset */ + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART1); + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART1); + /* make UART2 out of reset */ + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART2); + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART2); + /* make UART3 out of reset */ + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART3); + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART3); + /* make UART4 out of reset */ + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART4); + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART4); + + /* make DW_MMC2 out of reset */ + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, PERIPH_RST0_MMC2); + + /* enable clock for BT/WIFI */ + Val = MmioRead32 (PMUSSI_ONOFF8_REG) | PMUSSI_ONOFF8_EN_32KB; + MmioWrite32 (PMUSSI_ONOFF8_REG, Val); +} + +STATIC +VOID +MtcmosInit ( + IN VOID + ) +{ + UINT32 Data; + + /* enable MTCMOS for GPU */ + MmioWrite32 (AO_CTRL_BASE + SC_PW_MTCMOS_EN0, PW_EN0_G3D); + do { + Data = MmioRead32 (AO_CTRL_BASE + SC_PW_MTCMOS_ACK_STAT0); + } while ((Data & PW_EN0_G3D) == 0); +} + +EFI_STATUS +HiKeyInitPeripherals ( + IN VOID + ) +{ + UINT32 Data, Bits; + + /* make I2C0/I2C1/I2C2/SPI0 out of reset */ + Bits = PERIPH_RST3_I2C0 | PERIPH_RST3_I2C1 | PERIPH_RST3_I2C2 | \ + PERIPH_RST3_SSP; + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, Bits); + + do { + Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT3); + } while (Data & Bits); + + UartInit (); + /* MTCMOS -- Multi-threshold CMOS */ + MtcmosInit (); + + /* Set DETECT_J15_FASTBOOT (GPIO24) pin as GPIO function */ + MmioWrite32 (IOCG_084_REG, 0); /* configure GPIO24 as nopull */ + MmioWrite32 (IOMG_080_REG, 0); /* configure GPIO24 as GPIO */ + + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +HiKeyEntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + Status = HiKeyInitPeripherals (); + if (EFI_ERROR (Status)) { + return Status; + } + return Status; +}
Do some basic initialization on HiKey platform, such as pin setting, regulators and making peripherals out of reset mode. Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- Platform/Hisilicon/HiKey/HiKey.dsc | 3 + Platform/Hisilicon/HiKey/HiKey.fdf | 3 + Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 40 ++++++++ Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h | 31 ++++++ Silicon/Hisilicon/Hi6220/Include/Hi6220.h | 6 ++ Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 50 ++++++++++ Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 102 ++++++++++++++++++++ 7 files changed, 235 insertions(+) -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel