@@ -340,6 +340,9 @@ void __init pxa25x_map_io(void)
}
static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
+#ifdef CONFIG_CPU_PXA26x
+ .inverted = 1,
+#endif
.gpio_set_wake = gpio_set_wake,
};
@@ -71,6 +71,7 @@ struct pxa_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase;
unsigned int irq_base;
+ unsigned int inverted;
char label[10];
unsigned long irq_mask;
@@ -126,9 +127,9 @@ static inline int gpio_is_mmp_type(int type)
/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
*/
-static inline int __gpio_is_inverted(int gpio)
+static inline int __gpio_is_inverted(struct pxa_gpio_chip *chip, int gpio)
{
- if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+ if ((chip->inverted) && (gpio > 85))
return 1;
return 0;
}
@@ -139,15 +140,13 @@ static inline int __gpio_is_inverted(int gpio)
* is attributed as "occupied" here (I know this terminology isn't
* accurate, you are welcome to propose a better one :-)
*/
-static inline int __gpio_is_occupied(unsigned gpio)
+static inline int __gpio_is_occupied(struct pxa_gpio_chip *chip, unsigned gpio)
{
- struct pxa_gpio_chip *pxachip;
void __iomem *base;
unsigned long gafr = 0, gpdr = 0;
int ret, af = 0, dir = 0;
- pxachip = gpio_to_pxachip(gpio);
- base = gpio_chip_base(&pxachip->chip);
+ base = gpio_chip_base(&chip->chip);
gpdr = readl_relaxed(base + GPDR_OFFSET);
switch (gpio_type) {
@@ -158,7 +157,7 @@ static inline int __gpio_is_occupied(unsigned gpio)
af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
dir = gpdr & GPIO_bit(gpio);
- if (__gpio_is_inverted(gpio))
+ if (__gpio_is_inverted(chip, gpio))
ret = (af != 1) || (dir == 0);
else
ret = (af != 0) || (dir != 0);
@@ -188,16 +187,19 @@ int pxa_irq_to_gpio(struct irq_data *d)
return gpio;
}
-static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static int pxa_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
- void __iomem *base = gpio_chip_base(chip);
+ struct pxa_gpio_chip *chip = NULL;
+ void __iomem *base = gpio_chip_base(gc);
uint32_t value, mask = 1 << offset;
unsigned long flags;
+ chip = container_of(gc, struct pxa_gpio_chip, chip);
+
spin_lock_irqsave(&gpio_lock, flags);
value = readl_relaxed(base + GPDR_OFFSET);
- if (__gpio_is_inverted(chip->base + offset))
+ if (__gpio_is_inverted(chip, gc->base + offset))
value |= mask;
else
value &= ~mask;
@@ -207,19 +209,22 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
return 0;
}
-static int pxa_gpio_direction_output(struct gpio_chip *chip,
+static int pxa_gpio_direction_output(struct gpio_chip *gc,
unsigned offset, int value)
{
- void __iomem *base = gpio_chip_base(chip);
+ struct pxa_gpio_chip *chip = NULL;
+ void __iomem *base = gpio_chip_base(gc);
uint32_t tmp, mask = 1 << offset;
unsigned long flags;
+ chip = container_of(gc, struct pxa_gpio_chip, chip);
+
writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
spin_lock_irqsave(&gpio_lock, flags);
tmp = readl_relaxed(base + GPDR_OFFSET);
- if (__gpio_is_inverted(chip->base + offset))
+ if (__gpio_is_inverted(chip, gc->base + offset))
tmp &= ~mask;
else
tmp |= mask;
@@ -288,7 +293,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
return 0;
- if (__gpio_is_occupied(gpio))
+ if (__gpio_is_occupied(c, gpio))
return 0;
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
@@ -296,7 +301,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
- if (__gpio_is_inverted(gpio))
+ if (__gpio_is_inverted(c, gpio))
writel_relaxed(gpdr | mask, c->regbase + GPDR_OFFSET);
else
writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET);
@@ -475,6 +480,10 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)
ret = of_find_property(np, "marvell,gpio-ed-mask", NULL);
if (ret)
pdata->ed_mask = 1;
+ /* It's only valid for PXA26x */
+ ret = of_find_property(np, "marvell,gpio-inverted", NULL);
+ if (ret)
+ pdata->inverted = 1;
/* set the platform data */
pdev->dev.platform_data = pdata;
gpio_type = (int)of_id->data;
@@ -617,6 +626,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)
/* unmask GPIO edge detect for AP side */
if (info->ed_mask)
writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
+ /* update for gpio inverted */
+ c->inverted = info->inverted;
}
if (!use_of) {
@@ -17,6 +17,7 @@ extern int pxa_irq_to_gpio(struct irq_data *d);
struct pxa_gpio_platform_data {
unsigned ed_mask; /* not 0 means ed_mask reg is available */
+ unsigned inverted; /* only valid for PXA26x */
int (*gpio_set_wake)(unsigned int gpio, unsigned int on);
};
Avoid to judge whether gpio is inverted by identifying cpu in gpio driver. Move this into platform data of gpio driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- arch/arm/mach-pxa/pxa25x.c | 3 +++ drivers/gpio/gpio-pxa.c | 41 ++++++++++++++++++++++++++--------------- include/linux/gpio-pxa.h | 1 + 3 files changed, 30 insertions(+), 15 deletions(-)