| Message ID | 1358935677-10876-2-git-send-email-rajeshwari.s@samsung.com |
|---|---|
| State | New |
| Headers | show |
Dear Rajeshwari, On 23/01/13 19:07, Rajeshwari Shinde wrote: > This patch adds a function to set ps_hold data driving value high. > This enables the machine to stay powered on after the initial > power-on condition goes away(e.g. power button). > > Acked-by: Simon Glass <sjg@chromium.org> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > --- > Changes in V2: > - Corrected the multi line comment style > arch/arm/cpu/armv7/exynos/power.c | 10 ++++++++++ > arch/arm/include/asm/arch-exynos/power.h | 9 +++++++++ > 2 files changed, 19 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c > index d4bce6d..8572cfd 100644 > --- a/arch/arm/cpu/armv7/exynos/power.c > +++ b/arch/arm/cpu/armv7/exynos/power.c > @@ -95,3 +95,13 @@ void set_dp_phy_ctrl(unsigned int enable) > if (cpu_is_exynos5()) > exynos5_dp_phy_control(enable); > } > + > +void power_ps_hold_setup(void) Could you please modify function's name as other functions? (e.g: set_*) > +{ > + struct exynos5_power *power = > + (struct exynos5_power *)samsung_get_base_power(); > + > + /* Set PS-Hold high */ > + setbits_le32(&power->ps_hold_control, > + EXYNOS_PS_HOLD_CONTROL_DATA_HIGH); > +} This function should support exynos4 also. Please refer other functions. > diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h > index d2fdb59..8384cbb 100644 > --- a/arch/arm/include/asm/arch-exynos/power.h > +++ b/arch/arm/include/asm/arch-exynos/power.h > @@ -864,4 +864,13 @@ void set_dp_phy_ctrl(unsigned int enable); > > #define EXYNOS_DP_PHY_ENABLE (1 << 0) > > +#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH (1 << 8) > + > +/* > + * Set ps_hold data driving value high > + * This enables the machine to stay powered on > + * after the initial power-on condition goes away > + * (e.g. power button). > + */ > +void power_ps_hold_setup(void); > #endif > Thanks. Minkyu Kang.
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index d4bce6d..8572cfd 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -95,3 +95,13 @@ void set_dp_phy_ctrl(unsigned int enable) if (cpu_is_exynos5()) exynos5_dp_phy_control(enable); } + +void power_ps_hold_setup(void) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + /* Set PS-Hold high */ + setbits_le32(&power->ps_hold_control, + EXYNOS_PS_HOLD_CONTROL_DATA_HIGH); +} diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index d2fdb59..8384cbb 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -864,4 +864,13 @@ void set_dp_phy_ctrl(unsigned int enable); #define EXYNOS_DP_PHY_ENABLE (1 << 0) +#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH (1 << 8) + +/* + * Set ps_hold data driving value high + * This enables the machine to stay powered on + * after the initial power-on condition goes away + * (e.g. power button). + */ +void power_ps_hold_setup(void); #endif