@@ -352,6 +352,7 @@ struct ahci_host_priv {
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct reset_control *rsts; /* Optional */
struct regulator **target_pwrs; /* Optional */
+ struct regulator *ahci_regulator;/* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
* the PHY position in this array.
@@ -139,7 +139,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
* ahci_platform_enable_regulators - Enable regulators
* @hpriv: host private area to store config values
*
- * This function enables all the regulators found in
+ * This function enables all the regulators found in controller and
* hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
* disables all the regulators already enabled in reverse order and
* returns an error.
@@ -151,6 +151,12 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
{
int rc, i;
+ if (hpriv->ahci_regulator) {
+ rc = regulator_enable(hpriv->ahci_regulator);
+ if (rc)
+ return rc;
+ }
+
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
@@ -167,6 +173,8 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
if (hpriv->target_pwrs[i])
regulator_disable(hpriv->target_pwrs[i]);
+ if (hpriv->ahci_regulator)
+ regulator_disable(hpriv->ahci_regulator);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
@@ -175,7 +183,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
* ahci_platform_disable_regulators - Disable regulators
* @hpriv: host private area to store config values
*
- * This function disables all regulators found in hpriv->target_pwrs.
+ * This function disables all regulators found in hpriv->target_pwrs and
+ * AHCI controller.
*/
void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
{
@@ -186,6 +195,9 @@ void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
continue;
regulator_disable(hpriv->target_pwrs[i]);
}
+
+ if (hpriv->ahci_regulator)
+ regulator_disable(hpriv->ahci_regulator);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
/**
@@ -351,6 +363,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
*
* 1) mmio registers (IORESOURCE_MEM 0, mandatory)
* 2) regulator for controlling the targets power (optional)
+ * regulator for controlling the AHCI controller (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
* 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
@@ -408,6 +421,15 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
hpriv->clks[i] = clk;
}
+ hpriv->ahci_regulator = devm_regulator_get_optional(dev, "ahci");
+ if (IS_ERR(hpriv->ahci_regulator)) {
+ rc = PTR_ERR(hpriv->ahci_regulator);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ rc = 0;
+ hpriv->ahci_regulator = NULL;
+ }
+
if (flags & AHCI_PLATFORM_GET_RESETS) {
hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(hpriv->rsts)) {
The SoC R40 AHCI controller need a regulator to work. So this patch add a way to add an optional regulator on AHCI controller. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- drivers/ata/ahci.h | 1 + drivers/ata/libahci_platform.c | 26 ++++++++++++++++++++++++-- 2 files changed, 25 insertions(+), 2 deletions(-) -- 2.16.4