@@ -53,6 +53,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
@@ -723,6 +724,24 @@ static int ci_get_platdata(struct device *dev,
else
cable->connected = false;
}
+
+ platdata->pctl = devm_pinctrl_get(dev);
+ if (!IS_ERR(platdata->pctl)) {
+ struct pinctrl_state *p;
+
+ p = pinctrl_lookup_state(platdata->pctl, "default");
+ if (!IS_ERR(p))
+ platdata->pins_default = p;
+
+ p = pinctrl_lookup_state(platdata->pctl, "host");
+ if (!IS_ERR(p))
+ platdata->pins_host = p;
+
+ p = pinctrl_lookup_state(platdata->pctl, "device");
+ if (!IS_ERR(p))
+ platdata->pins_device = p;
+ }
+
return 0;
}
@@ -13,6 +13,7 @@
#include <linux/usb/hcd.h>
#include <linux/usb/chipidea.h>
#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
#include "../host/ehci.h"
@@ -153,6 +154,10 @@ static int host_start(struct ci_hdrc *ci)
}
}
+ if (ci->platdata->pins_host)
+ pinctrl_select_state(ci->platdata->pctl,
+ ci->platdata->pins_host);
+
ret = usb_add_hcd(hcd, 0, 0);
if (ret) {
goto disable_reg;
@@ -197,6 +202,10 @@ static void host_stop(struct ci_hdrc *ci)
}
ci->hcd = NULL;
ci->otg.host = NULL;
+
+ if (ci->platdata->pins_host && ci->platdata->pins_default)
+ pinctrl_select_state(ci->platdata->pctl,
+ ci->platdata->pins_default);
}
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg-fsm.h>
@@ -1965,6 +1966,10 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
static int udc_id_switch_for_device(struct ci_hdrc *ci)
{
+ if (ci->platdata->pins_device)
+ pinctrl_select_state(ci->platdata->pctl,
+ ci->platdata->pins_device);
+
if (ci->is_otg)
/* Clear and enable BSV irq */
hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
@@ -1983,6 +1988,10 @@ static void udc_id_switch_for_host(struct ci_hdrc *ci)
hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
ci->vbus_active = 0;
+
+ if (ci->platdata->pins_device && ci->platdata->pins_default)
+ pinctrl_select_state(ci->platdata->pctl,
+ ci->platdata->pins_default);
}
/**
@@ -77,6 +77,12 @@ struct ci_hdrc_platform_data {
struct ci_hdrc_cable vbus_extcon;
struct ci_hdrc_cable id_extcon;
u32 phy_clkgate_delay_us;
+
+ /* pins */
+ struct pinctrl *pctl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_host;
+ struct pinctrl_state *pins_device;
};
/* Default offset of capability registers */
Some hardware implementations require to configure pins differently according to the USB role (host/device), this can be an update of the pins routing or a simple GPIO value change. This patch introduces new optional "host" and "device" pinctrls. If these pinctrls are defined by the device, they are respectively selected on host/device role start. If a default pinctrl exist, it is restored on host/device role stop. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> --- v2: includes ordering v3: no change drivers/usb/chipidea/core.c | 19 +++++++++++++++++++ drivers/usb/chipidea/host.c | 9 +++++++++ drivers/usb/chipidea/udc.c | 9 +++++++++ include/linux/usb/chipidea.h | 6 ++++++ 4 files changed, 43 insertions(+) -- 2.7.4