@@ -12,7 +12,7 @@
#include <net.h>
#include <dp83848.h>
#include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
@@ -9,7 +9,7 @@
#include <net.h>
#include <miiphy.h>
#include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
@@ -19,7 +19,7 @@
#include <net.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
int ksz8873_is_phy_connected(int phy_addr)
{
@@ -13,7 +13,7 @@
#include <miiphy.h>
#include <lxt971a.h>
#include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
@@ -1,5 +1,6 @@
source "drivers/net/phy/Kconfig"
source "drivers/net/pfe_eth/Kconfig"
+source "drivers/net/ti/Kconfig"
config DM_ETH
bool "Enable Driver Model for Ethernet drivers"
@@ -11,13 +12,6 @@ config DM_ETH
This is currently implemented in net/eth-uclass.c
Look in include/net.h for details.
-config DRIVER_TI_CPSW
- bool "TI Common Platform Ethernet Switch"
- select PHYLIB
- help
- This driver supports the TI three port switch gigabit ethernet
- subsystem found in the TI SoCs.
-
menuconfig NETDEVICES
bool "Network device support"
depends on NET
@@ -322,11 +316,6 @@ config SH_ETHER
help
This driver supports the Ethernet for Renesas SH and ARM SoCs.
-config DRIVER_TI_EMAC
- bool "TI Davinci EMAC"
- help
- Support for davinci emac
-
config XILINX_AXIEMAC
depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
select PHYLIB
@@ -30,7 +30,6 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o
-obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_LAN91C96) += lan91c96.o
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
@@ -56,9 +55,7 @@ obj-$(CONFIG_SH_ETHER) += sh_eth.o
obj-$(CONFIG_RENESAS_RAVB) += ravb.o
obj-$(CONFIG_SMC91111) += smc91111.o
obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
-obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o
obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o
obj-$(CONFIG_ULI526X) += uli526x.o
obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
@@ -73,3 +70,4 @@ obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
obj-$(CONFIG_FSL_PFE) += pfe_eth/
obj-$(CONFIG_SNI_AVE) += sni_ave.o
+obj-y += ti/
new file mode 100644
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+config DRIVER_TI_CPSW
+ bool "TI Common Platform Ethernet Switch"
+ select PHYLIB
+ help
+ This driver supports the TI three port switch gigabit ethernet
+ subsystem found in the TI SoCs.
+
+config DRIVER_TI_EMAC
+ bool "TI Davinci EMAC"
+ help
+ Support for davinci emac
new file mode 100644
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o
+obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
+obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
similarity index 100%
rename from drivers/net/cpsw-common.c
rename to drivers/net/ti/cpsw-common.c
similarity index 100%
rename from drivers/net/cpsw.c
rename to drivers/net/ti/cpsw.c
similarity index 100%
rename from drivers/net/davinci_emac.c
rename to drivers/net/ti/davinci_emac.c
similarity index 100%
rename from drivers/net/davinci_emac.h
rename to drivers/net/ti/davinci_emac.h
similarity index 100%
rename from drivers/net/keystone_net.c
rename to drivers/net/ti/keystone_net.c