diff mbox series

[11/15] Bluetooth: hci_bcm: Add BCM20702A1 variant

Message ID 20181107101308.7626-12-wens@csie.org
State New
Headers show
Series None | expand

Commit Message

Chen-Yu Tsai Nov. 7, 2018, 10:13 a.m. UTC 
From: Maxime Ripard <maxime.ripard@free-electrons.com>


The BCM20702A1 chip is a single-chip Bluetooth 4.0 controller and
transceiver. It is found in the AMPAK AP6210 WiFi+BT package.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Chen-Yu Tsai <wens@csie.org>

---
 drivers/bluetooth/btbcm.c   | 6 ++++++
 drivers/bluetooth/hci_bcm.c | 1 +
 2 files changed, 7 insertions(+)

-- 
2.19.1

Comments

Chen-Yu Tsai Nov. 8, 2018, 6:53 a.m. UTC | #1 
On Thu, Nov 8, 2018 at 4:36 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>

> Hi!

>

> On Wed, Nov 07, 2018 at 06:13:04PM +0800, Chen-Yu Tsai wrote:

> > From: Maxime Ripard <maxime.ripard@free-electrons.com>

> >

> > The BCM20702A1 chip is a single-chip Bluetooth 4.0 controller and

> > transceiver. It is found in the AMPAK AP6210 WiFi+BT package.

> >

> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

> > Signed-off-by: Chen-Yu Tsai <wens@csie.org>

>

> if you resubmit it, could you do s/free-electrons/bootlin/ ?


OK. And for the author as well?

ChenYu
diff mbox series

Patch

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index e3e4d929e74f..22d4b530da03 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -33,6 +33,7 @@ 
 #define VERSION "0.1"
 
 #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+#define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}})
 #define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
 #define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
 
@@ -64,6 +65,9 @@  int btbcm_check_bdaddr(struct hci_dev *hdev)
 	 * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
 	 * with no configured address.
 	 *
+	 * The address 20:70:02:A0:00:00 indicates a BCM20702A1 controller
+	 * with no configured address.
+	 *
 	 * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
 	 * with waiting for configuration state.
 	 *
@@ -71,6 +75,7 @@  int btbcm_check_bdaddr(struct hci_dev *hdev)
 	 * with waiting for configuration state.
 	 */
 	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1)) {
 		bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
@@ -330,6 +335,7 @@  static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x2209, "BCM43430A1"  },	/* 001.002.009 */
 	{ 0x6119, "BCM4345C0"	},	/* 003.001.025 */
 	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
+	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
 	{ }
 };
 
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index bf5dee9b04d8..73b520622a24 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1396,6 +1396,7 @@  static void bcm_serdev_remove(struct serdev_device *serdev)
 
 #ifdef CONFIG_OF
 static const struct of_device_id bcm_bluetooth_of_match[] = {
+	{ .compatible = "brcm,bcm20702a1" },
 	{ .compatible = "brcm,bcm43438-bt" },
 	{ },
 };