| Message ID | 20181122151834.6194-6-rui.silva@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v9,01/13] media: staging/imx: refactor imx media device probe | expand |
Hi Hans, On Fri 07 Dec 2018 at 12:39, Hans Verkuil wrote: > On 11/22/2018 04:18 PM, Rui Miguel Silva wrote: >> Add bindings documentation for i.MX7 media drivers. >> The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface. >> >> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> >> Reviewed-by: Rob Herring <robh@kernel.org> >> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> > > Please move this patch to the beginning of the series to avoid > checkpatch warnings: > > WARNING: DT compatible string "fsl,imx7-csi" appears > un-documented -- check ./Documentation/devicetree/bindings/ > #1378: FILE: drivers/staging/media/imx/imx7-media-csi.c:1336: > + { .compatible = "fsl,imx7-csi" }, Will do, thanks for catching this one. --- Cheers, Rui > > Thanks! > > Hans > > >> --- >> .../devicetree/bindings/media/imx7-csi.txt | 45 ++++++++++ >> .../bindings/media/imx7-mipi-csi2.txt | 90 >> +++++++++++++++++++ >> 2 files changed, 135 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/media/imx7-csi.txt >> create mode 100644 >> Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt >> >> diff --git >> a/Documentation/devicetree/bindings/media/imx7-csi.txt >> b/Documentation/devicetree/bindings/media/imx7-csi.txt >> new file mode 100644 >> index 000000000000..3c07bc676bc3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/imx7-csi.txt >> @@ -0,0 +1,45 @@ >> +Freescale i.MX7 CMOS Sensor Interface >> +===================================== >> + >> +csi node >> +-------- >> + >> +This is device node for the CMOS Sensor Interface (CSI) which >> enables the chip >> +to connect directly to external CMOS image sensors. >> + >> +Required properties: >> + >> +- compatible : "fsl,imx7-csi"; >> +- reg : base address and length of the register set >> for the device; >> +- interrupts : should contain CSI interrupt; >> +- clocks : list of clock specifiers, see >> + >> Documentation/devicetree/bindings/clock/clock-bindings.txt for >> details; >> +- clock-names : must contain "axi", "mclk" and "dcic" >> entries, matching >> + entries in the clock property; >> + >> +The device node shall contain one 'port' child node with one >> child 'endpoint' >> +node, according to the bindings defined in: >> +Documentation/devicetree/bindings/media/video-interfaces.txt. >> + >> +In the following example a remote endpoint is a video >> multiplexer. >> + >> +example: >> + >> + csi: csi@30710000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + compatible = "fsl,imx7-csi"; >> + reg = <0x30710000 0x10000>; >> + interrupts = <GIC_SPI 7 >> IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clks IMX7D_CLK_DUMMY>, >> + <&clks >> IMX7D_CSI_MCLK_ROOT_CLK>, >> + <&clks >> IMX7D_CLK_DUMMY>; >> + clock-names = "axi", "mclk", "dcic"; >> + >> + port { >> + csi_from_csi_mux: endpoint { >> + remote-endpoint = >> <&csi_mux_to_csi>; >> + }; >> + }; >> + }; >> diff --git >> a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt >> b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt >> new file mode 100644 >> index 000000000000..71fd74ed3ec8 >> --- /dev/null >> +++ >> b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt >> @@ -0,0 +1,90 @@ >> +Freescale i.MX7 Mipi CSI2 >> +========================= >> + >> +mipi_csi2 node >> +-------------- >> + >> +This is the device node for the MIPI CSI-2 receiver core in >> i.MX7 SoC. It is >> +compatible with previous version of Samsung D-phy. >> + >> +Required properties: >> + >> +- compatible : "fsl,imx7-mipi-csi2"; >> +- reg : base address and length of the register set >> for the device; >> +- interrupts : should contain MIPI CSIS interrupt; >> +- clocks : list of clock specifiers, see >> + >> Documentation/devicetree/bindings/clock/clock-bindings.txt for >> details; >> +- clock-names : must contain "pclk", "wrap" and "phy" >> entries, matching >> + entries in the clock property; >> +- power-domains : a phandle to the power domain, see >> + >> Documentation/devicetree/bindings/power/power_domain.txt for >> details. >> +- reset-names : should include following entry "mrst"; >> +- resets : a list of phandle, should contain reset >> entry of >> + reset-names; >> +- phy-supply : from the generic phy bindings, a phandle to >> a regulator that >> + provides power to MIPI CSIS core; >> + >> +Optional properties: >> + >> +- clock-frequency : The IP's main (system bus) clock frequency >> in Hz, default >> + value when this property is not specified is >> 166 MHz; >> +- fsl,csis-hs-settle : differential receiver (HS-RX) settle >> time; >> + >> +The device node should contain two 'port' child nodes with one >> child 'endpoint' >> +node, according to the bindings defined in: >> + Documentation/devicetree/bindings/ >> media/video-interfaces.txt. >> + The following are properties specific to those nodes. >> + >> +port node >> +--------- >> + >> +- reg : (required) can take the values 0 or 1, >> where 0 shall be >> + related to the sink port and port 1 shall >> be the source >> + one; >> + >> +endpoint node >> +------------- >> + >> +- data-lanes : (required) an array specifying active >> physical MIPI-CSI2 >> + data input lanes and their mapping to logical >> lanes; this >> + shall only be applied to port 0 (sink >> port), the array's >> + content is unused only its length is >> meaningful, >> + in this case the maximum length supported >> is 2; >> + >> +example: >> + >> + mipi_csi: mipi-csi@30750000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + compatible = "fsl,imx7-mipi-csi2"; >> + reg = <0x30750000 0x10000>; >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clks IMX7D_IPG_ROOT_CLK>, >> + <&clks >> IMX7D_MIPI_CSI_ROOT_CLK>, >> + <&clks >> IMX7D_MIPI_DPHY_ROOT_CLK>; >> + clock-names = "pclk", "wrap", "phy"; >> + clock-frequency = <166000000>; >> + power-domains = <&pgc_mipi_phy>; >> + phy-supply = <®_1p0d>; >> + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; >> + reset-names = "mrst"; >> + fsl,csis-hs-settle = <3>; >> + >> + port@0 { >> + reg = <0>; >> + >> + mipi_from_sensor: endpoint { >> + remote-endpoint = >> <&ov2680_to_mipi>; >> + data-lanes = <1>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + >> + mipi_vc0_to_csi_mux: endpoint { >> + remote-endpoint = >> <&csi_mux_from_mipi_vc0>; >> + }; >> + }; >> + }; >>
diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt new file mode 100644 index 000000000000..3c07bc676bc3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/imx7-csi.txt @@ -0,0 +1,45 @@ +Freescale i.MX7 CMOS Sensor Interface +===================================== + +csi node +-------- + +This is device node for the CMOS Sensor Interface (CSI) which enables the chip +to connect directly to external CMOS image sensors. + +Required properties: + +- compatible : "fsl,imx7-csi"; +- reg : base address and length of the register set for the device; +- interrupts : should contain CSI interrupt; +- clocks : list of clock specifiers, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details; +- clock-names : must contain "axi", "mclk" and "dcic" entries, matching + entries in the clock property; + +The device node shall contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt. + +In the following example a remote endpoint is a video multiplexer. + +example: + + csi: csi@30710000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt new file mode 100644 index 000000000000..71fd74ed3ec8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt @@ -0,0 +1,90 @@ +Freescale i.MX7 Mipi CSI2 +========================= + +mipi_csi2 node +-------------- + +This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is +compatible with previous version of Samsung D-phy. + +Required properties: + +- compatible : "fsl,imx7-mipi-csi2"; +- reg : base address and length of the register set for the device; +- interrupts : should contain MIPI CSIS interrupt; +- clocks : list of clock specifiers, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details; +- clock-names : must contain "pclk", "wrap" and "phy" entries, matching + entries in the clock property; +- power-domains : a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. +- reset-names : should include following entry "mrst"; +- resets : a list of phandle, should contain reset entry of + reset-names; +- phy-supply : from the generic phy bindings, a phandle to a regulator that + provides power to MIPI CSIS core; + +Optional properties: + +- clock-frequency : The IP's main (system bus) clock frequency in Hz, default + value when this property is not specified is 166 MHz; +- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; + +The device node should contain two 'port' child nodes with one child 'endpoint' +node, according to the bindings defined in: + Documentation/devicetree/bindings/ media/video-interfaces.txt. + The following are properties specific to those nodes. + +port node +--------- + +- reg : (required) can take the values 0 or 1, where 0 shall be + related to the sink port and port 1 shall be the source + one; + +endpoint node +------------- + +- data-lanes : (required) an array specifying active physical MIPI-CSI2 + data input lanes and their mapping to logical lanes; this + shall only be applied to port 0 (sink port), the array's + content is unused only its length is meaningful, + in this case the maximum length supported is 2; + +example: + + mipi_csi: mipi-csi@30750000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + clock-frequency = <166000000>; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + fsl,csis-hs-settle = <3>; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + };