@@ -46,6 +46,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
+dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
new file mode 100644
@@ -0,0 +1,1155 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ osc32k: osc@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc32khz";
+ };
+ osc26m: osc@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "osc26mhz";
+ };
+ pclk: clk@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "apb_pclk";
+ };
+ pll_arm0: clk@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll0";
+ };
+ pll_arm1: clk@2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll1";
+ };
+ pll_peri: clk@3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll2";
+ };
+ pll_usb: clk@4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll3";
+ };
+ pll_hdmi: clk@5 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1188000000>;
+ clock-output-names = "armpll4";
+ };
+ pll_gpu: clk@6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1300000000>;
+ clock-output-names = "armpll5";
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ pmctrl: pmctrl@fca08000 {
+ compatible = "hisilicon,pmctrl";
+ reg = <0xfca08000 0x1000>;
+ };
+
+ sctrl: sctrl@fc802000 {
+ compatible = "hisilicon,sctrl";
+ reg = <0xfc802000 0x1000>;
+
+ refclk_uart0: refclk@0 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart0";
+ /* each item value */
+ /* reg_offset, enable_bits */
+ hisilicon,hi3620-clkmux = <0x100 0x80>;
+ };
+ refclk_uart1: refclk@1 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart1";
+ hisilicon,hi3620-clkmux = <0x100 0x100>;
+ };
+ refclk_uart2: refclk@2 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart2";
+ hisilicon,hi3620-clkmux = <0x100 0x200>;
+ };
+ refclk_uart3: refclk@3 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart3";
+ hisilicon,hi3620-clkmux = <0x100 0x400>;
+ };
+ refclk_uart4: refclk@4 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "rclk_uart4";
+ hisilicon,hi3620-clkmux = <0x100 0x800>;
+ };
+ refclk_cfgaxi: refclk@5 {
+ compatible = "hisilicon,clk-fixed-factor";
+ #clock-cells = <0>;
+ clocks = <&pll_peri>;
+ clock-output-names = "rclk_cfgaxi";
+ /*mult, div*/
+ hisilicon,fixed-factor = <1 30>;
+ };
+ refclk_spi0: refclk@6 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &refclk_cfgaxi>;
+ clock-output-names = "rclk_spi0";
+ hisilicon,hi3620-clkmux = <0x100 0x1000>;
+ };
+ refclk_spi1: refclk@7 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &refclk_cfgaxi>;
+ clock-output-names = "rclk_spi1";
+ hisilicon,hi3620-clkmux = <0x100 0x2000>;
+ };
+ refclk_spi2: refclk@8 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &refclk_cfgaxi>;
+ clock-output-names = "rclk_spi2";
+ hisilicon,hi3620-clkmux = <0x100 0x4000>;
+ };
+ refclk_pwm0: refclk@9 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "rclk_pwm0";
+ hisilicon,hi3620-clkmux = <0x104 0x400>;
+ };
+ refclk_pwm1: refclk@10 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "rclk_pwm1";
+ hisilicon,hi3620-clkmux = <0x104 0x800>;
+ };
+ refclk_tcxo: refclk@11 {
+ compatible = "hisilicon,clk-fixed-factor";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "rclk_tcxo";
+ hisilicon,fixed-factor = <1 4>;
+ };
+ refclk_timer0: refclk@12 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "rclk_tim0";
+ hisilicon,hi3620-clkmux = <0 0x8000>;
+ };
+ refclk_timer1: refclk@13 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "rclk_tim1";
+ hisilicon,hi3620-clkmux = <0 0x20000>;
+ };
+ refclk_timer2: refclk@14 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "rclk_tim2";
+ hisilicon,hi3620-clkmux = <0 0x80000>;
+ };
+ refclk_timer3: refclk@15 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "rclk_tim3";
+ hisilicon,hi3620-clkmux = <0 0x200000>;
+ };
+ refclk_timer4: refclk@16 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "rclk_tim4";
+ hisilicon,hi3620-clkmux = <0x18 0x1>;
+ };
+ refclk_timer5: refclk@17 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "rclk_tim5";
+ hisilicon,hi3620-clkmux = <0x18 0x4>;
+ };
+ refclk_timer6: refclk@18 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "rclk_tim6";
+ hisilicon,hi3620-clkmux = <0x18 0x10>;
+ };
+ refclk_timer7: refclk@19 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "rclk_tim7";
+ hisilicon,hi3620-clkmux = <0x18 0x40>;
+ };
+ refclk_timer8: refclk@20 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "rclk_tim8";
+ hisilicon,hi3620-clkmux = <0x18 0x100>;
+ };
+ refclk_timer9: refclk@21 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "rclk_tim9";
+ hisilicon,hi3620-clkmux = <0x18 0x400>;
+ };
+ refclk_shareAXI: refclk@22 {
+ compatible = "hisilicon,hi3620-clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "rclk_shareAXI";
+ hisilicon,hi3620-clkmux = <0x24 0x8000>;
+ };
+ uartclk0: clkgate@0 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart0>;
+ clock-output-names = "uartclk0";
+ hisilicon,hi3620-clkreset = <0x98 0x10000>;
+ hisilicon,hi3620-clkgate = <0x40 0x10000>;
+ };
+ uartclk1: clkgate@1 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart1>;
+ clock-output-names = "uartclk1";
+ hisilicon,hi3620-clkreset = <0x98 0x20000>;
+ hisilicon,hi3620-clkgate = <0x40 0x20000>;
+ };
+ uartclk2: clkgate@2 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart2>;
+ clock-output-names = "uartclk2";
+ hisilicon,hi3620-clkreset = <0x98 0x40000>;
+ hisilicon,hi3620-clkgate = <0x40 0x40000>;
+ };
+ uartclk3: clkgate@3 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart3>;
+ clock-output-names = "uartclk3";
+ hisilicon,hi3620-clkreset = <0x98 0x80000>;
+ hisilicon,hi3620-clkgate = <0x40 0x80000>;
+ };
+ uartclk4: clkgate@4 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_uart4>;
+ clock-output-names = "uartclk4";
+ hisilicon,hi3620-clkreset = <0x98 0x100000>;
+ hisilicon,hi3620-clkgate = <0x40 0x100000>;
+ };
+ gpioclk0: clkgate@5 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk0";
+ hisilicon,hi3620-clkreset = <0x80 0x100>;
+ hisilicon,hi3620-clkgate = <0x20 0x100>;
+ };
+ gpioclk1: clkgate@6 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk1";
+ hisilicon,hi3620-clkreset = <0x80 0x200>;
+ hisilicon,hi3620-clkgate = <0x20 0x200>;
+ };
+ gpioclk2: clkgate@7 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk2";
+ hisilicon,hi3620-clkreset = <0x80 0x400>;
+ hisilicon,hi3620-clkgate = <0x20 0x400>;
+ };
+ gpioclk3: clkgate@8 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk3";
+ hisilicon,hi3620-clkreset = <0x80 0x800>;
+ hisilicon,hi3620-clkgate = <0x20 0x800>;
+ };
+ gpioclk4: clkgate@9 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk4";
+ hisilicon,hi3620-clkreset = <0x80 0x1000>;
+ hisilicon,hi3620-clkgate = <0x20 0x1000>;
+ };
+ gpioclk5: clkgate@10 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk5";
+ hisilicon,hi3620-clkreset = <0x80 0x2000>;
+ hisilicon,hi3620-clkgate = <0x20 0x2000>;
+ };
+ gpioclk6: clkgate@11 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk6";
+ hisilicon,hi3620-clkreset = <0x80 0x4000>;
+ hisilicon,hi3620-clkgate = <0x20 0x4000>;
+ };
+ gpioclk7: clkgate@12 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk7";
+ hisilicon,hi3620-clkreset = <0x80 0x8000>;
+ hisilicon,hi3620-clkgate = <0x20 0x8000>;
+ };
+ gpioclk8: clkgate@13 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk8";
+ hisilicon,hi3620-clkreset = <0x80 0x10000>;
+ hisilicon,hi3620-clkgate = <0x20 0x10000>;
+ };
+ gpioclk9: clkgate@14 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk9";
+ hisilicon,hi3620-clkreset = <0x80 0x20000>;
+ hisilicon,hi3620-clkgate = <0x20 0x20000>;
+ };
+ gpioclk10: clkgate@15 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk10";
+ hisilicon,hi3620-clkreset = <0x80 0x40000>;
+ hisilicon,hi3620-clkgate = <0x20 0x40000>;
+ };
+ gpioclk11: clkgate@16 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk11";
+ hisilicon,hi3620-clkreset = <0x80 0x80000>;
+ hisilicon,hi3620-clkgate = <0x20 0x80000>;
+ };
+ gpioclk12: clkgate@17 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk12";
+ hisilicon,hi3620-clkreset = <0x80 0x100000>;
+ hisilicon,hi3620-clkgate = <0x20 0x100000>;
+ };
+ gpioclk13: clkgate@18 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk13";
+ hisilicon,hi3620-clkreset = <0x80 0x200000>;
+ hisilicon,hi3620-clkgate = <0x20 0x200000>;
+ };
+ gpioclk14: clkgate@19 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk14";
+ hisilicon,hi3620-clkreset = <0x80 0x400000>;
+ hisilicon,hi3620-clkgate = <0x20 0x400000>;
+ };
+ gpioclk15: clkgate@20 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk15";
+ hisilicon,hi3620-clkreset = <0x80 0x800000>;
+ hisilicon,hi3620-clkgate = <0x20 0x800000>;
+ };
+ gpioclk16: clkgate@21 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk16";
+ hisilicon,hi3620-clkreset = <0x80 0x1000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x1000000>;
+ };
+ gpioclk17: clkgate@22 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk17";
+ hisilicon,hi3620-clkreset = <0x80 0x2000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x2000000>;
+ };
+ gpioclk18: clkgate@23 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk18";
+ hisilicon,hi3620-clkreset = <0x80 0x4000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x4000000>;
+ };
+ gpioclk19: clkgate@24 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk19";
+ hisilicon,hi3620-clkreset = <0x80 0x8000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x8000000>;
+ };
+ gpioclk20: clkgate@25 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk20";
+ hisilicon,hi3620-clkreset = <0x80 0x10000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x10000000>;
+ };
+ gpioclk21: clkgate@26 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk21";
+ hisilicon,hi3620-clkreset = <0x80 0x20000000>;
+ hisilicon,hi3620-clkgate = <0x20 0x20000000>;
+ };
+ spiclk0: clkgate@27 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_spi0>;
+ clock-output-names = "spiclk0";
+ hisilicon,hi3620-clkreset = <0x98 0x200000>;
+ hisilicon,hi3620-clkgate = <0x40 0x200000>;
+ };
+ spiclk1: clkgate@28 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_spi1>;
+ clock-output-names = "spiclk1";
+ hisilicon,hi3620-clkreset = <0x98 0x400000>;
+ hisilicon,hi3620-clkgate = <0x40 0x400000>;
+ };
+ spiclk2: clkgate@29 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_spi2>;
+ clock-output-names = "spiclk2";
+ hisilicon,hi3620-clkreset = <0x98 0x800000>;
+ hisilicon,hi3620-clkgate = <0x40 0x800000>;
+ };
+ pwmclk0: clkgate@30 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_pwm0>;
+ clock-output-names = "pwmclk0";
+ hisilicon,hi3620-clkreset = <0x98 0x80>;
+ hisilicon,hi3620-clkgate = <0x40 0x80>;
+ };
+ pwmclk1: clkgate@31 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_pwm1>;
+ clock-output-names = "pwmclk1";
+ hisilicon,hi3620-clkreset = <0x98 0x100>;
+ hisilicon,hi3620-clkgate = <0x40 0x100>;
+ };
+ timerclk01: clkgate@32 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk01";
+ hisilicon,hi3620-clkreset = <0x80 0x1>;
+ hisilicon,hi3620-clkgate = <0x20 0x3>;
+ };
+ timerclk23: clkgate@33 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk23";
+ hisilicon,hi3620-clkreset = <0x80 0x2>;
+ hisilicon,hi3620-clkgate = <0x20 0xc>;
+ };
+ timerclk45: clkgate@34 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk45";
+ hisilicon,hi3620-clkreset = <0x98 0x8>;
+ hisilicon,hi3620-clkgate = <0x40 0x8>;
+ };
+ timerclk67: clkgate@35 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk67";
+ hisilicon,hi3620-clkreset = <0x98 0x10>;
+ hisilicon,hi3620-clkgate = <0x40 0x10>;
+ };
+ timerclk89: clkgate@36 {
+ compatible = "hisilicon,hi3620-clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_tcxo>;
+ clock-output-names = "timerclk89";
+ hisilicon,hi3620-clkreset = <0x98 0x20>;
+ hisilicon,hi3620-clkgate = <0x40 0x20>;
+ };
+ timclk0: clkgate@37 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer0>;
+ clock-output-names = "timclk0";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 16>;
+ };
+ timclk1: clkgate@38 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer1>;
+ clock-output-names = "timclk1";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 18>;
+ };
+ timclk2: clkgate@39 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer2>;
+ clock-output-names = "timclk2";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 20>;
+ };
+ timclk3: clkgate@40 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer3>;
+ clock-output-names = "timclk3";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0 22>;
+ };
+ timclk4: clkgate@41 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer4>;
+ clock-output-names = "timclk4";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 0>;
+ };
+ timclk5: clkgate@42 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer5>;
+ clock-output-names = "timclk5";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 2>;
+ };
+ timclk6: clkgate@43 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer6>;
+ clock-output-names = "timclk6";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 4>;
+ };
+ timclk7: clkgate@44 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer7>;
+ clock-output-names = "timclk7";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 6>;
+ };
+ timclk8: clkgate@45 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer8>;
+ clock-output-names = "timclk8";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 8>;
+ };
+ timclk9: clkgate@46 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&refclk_timer9>;
+ clock-output-names = "timclk9";
+ hisilicon,clkgate-inverted;
+ hisilicon,clkgate = <0x18 10>;
+ };
+ dtable: clkdiv@0 {
+ #hisilicon,clkdiv-table-cells = <2>;
+ };
+ div_shareaxi: clkdiv@1 {
+ compatible = "hisilicon,hi3620-clk-div";
+ #clock-cells = <0>;
+ clocks = <&refclk_shareAXI>;
+ clock-output-names = "shareAXI_div";
+ hisilicon,clkdiv-table = <
+ &dtable 0 1 &dtable 1 2 &dtable 2 3 &dtable 3 4
+ &dtable 4 5 &dtable 5 6 &dtable 6 7 &dtable 7 8
+ &dtable 8 9 &dtable 9 10 &dtable 10 11 &dtable 11 12
+ &dtable 12 13 &dtable 13 14 &dtable 14 15 &dtable 15 16
+ &dtable 16 17 &dtable 17 18 &dtable 18 19 &dtable 19 20
+ &dtable 20 21 &dtable 21 22 &dtable 22 23 &dtable 23 24
+ &dtable 24 25 &dtable 25 26 &dtable 26 27 &dtable 27 28
+ &dtable 28 29 &dtable 29 30 &dtable 30 31 &dtable 31 32>;
+ /* divider register offset, mask */
+ hisilicon,clkdiv = <0x100 0x1f>;
+ };
+ div_cfgaxi: clkdiv@2 {
+ compatible = "hisilicon,hi3620-clk-div";
+ #clock-cells = <0>;
+ clocks = <&div_shareaxi>;
+ clock-output-names = "cfgAXI_div";
+ hisilicon,clkdiv-table = <&dtable 0x01 2>;
+ hisilicon,clkdiv = <0x100 0x60>;
+ };
+ };
+
+ l2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfc10000 0x100000>;
+ interrupts = <0 15 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ intc: interrupt-controller@fc001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ /* gic dist base, gic cpu base */
+ reg = <0xfc001000 0x1000>, <0xfc000100 0x100>;
+ };
+
+ timer0: timer@fc800000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc800000 0x1000>;
+ /* timer00 & timer01 */
+ interrupts = <0 0 4>, <0 1 4>;
+ clocks = <&timclk0 &timclk1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer1: timer@fc801000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc801000 0x1000>;
+ /* timer10 & timer11 */
+ interrupts = <0 2 4>, <0 3 4>;
+ clocks = <&timclk2 &timclk3>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer2: timer@fca01000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca01000 0x1000>;
+ /* timer20 & timer21 */
+ interrupts = <0 4 4>, <0 5 4>;
+ clocks = <&timclk4 &timclk5>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer3: timer@fca02000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca02000 0x1000>;
+ /* timer30 & timer31 */
+ interrupts = <0 6 4>, <0 7 4>;
+ clocks = <&timclk6 &timclk7>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer4: timer@fca03000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca03000 0x1000>;
+ /* timer40 & timer41 */
+ interrupts = <0 96 4>, <0 97 4>;
+ clocks = <&timclk8 &timclk9>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart0: uart@fcb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb00000 0x1000>;
+ interrupts = <0 20 4>;
+ clocks = <&uartclk0>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: uart@fcb01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb01000 0x1000>;
+ interrupts = <0 21 4>;
+ clocks = <&uartclk1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart@fcb02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb02000 0x1000>;
+ interrupts = <0 22 4>;
+ clocks = <&uartclk2>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart@fcb03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb03000 0x1000>;
+ interrupts = <0 23 4>;
+ clocks = <&uartclk3>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: uart@fcb04000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb04000 0x1000>;
+ interrupts = <0 24 4>;
+ clocks = <&uartclk4>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio0: gpio@fc806000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc806000 0x1000>;
+ interrupts = <0 64 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+ &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk0>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio1: gpio@fc807000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc807000 0x1000>;
+ interrupts = <0 65 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+ &pmx0 6 5 1 &pmx0 7 6 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk1>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio2: gpio@fc808000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc808000 0x1000>;
+ interrupts = <0 66 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+ &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+ &pmx0 6 3 1 &pmx0 7 3 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk2>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio3: gpio@fc809000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc809000 0x1000>;
+ interrupts = <0 67 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+ &pmx0 6 11 1 &pmx0 7 11 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk3>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio4: gpio@fc80a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80a000 0x1000>;
+ interrupts = <0 68 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+ &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+ &pmx0 6 13 1 &pmx0 7 13 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk4>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio5: gpio@fc80b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80b000 0x1000>;
+ interrupts = <0 69 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+ &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+ &pmx0 6 16 1 &pmx0 7 16 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk5>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio6: gpio@fc80c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80c000 0x1000>;
+ interrupts = <0 70 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+ &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+ &pmx0 6 18 1 &pmx0 7 19 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk6>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio7: gpio@fc80d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80d000 0x1000>;
+ interrupts = <0 71 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+ &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+ &pmx0 6 25 1 &pmx0 7 26 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk7>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio8: gpio@fc80e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80e000 0x1000>;
+ interrupts = <0 72 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+ &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+ &pmx0 6 33 1 &pmx0 7 34 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk8>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio9: gpio@fc80f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80f000 0x1000>;
+ interrupts = <0 73 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+ &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+ &pmx0 6 41 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk9>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio10: gpio@fc810000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc810000 0x1000>;
+ interrupts = <0 74 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+ &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk10>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio11: gpio@fc811000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc811000 0x1000>;
+ interrupts = <0 75 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+ &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+ &pmx0 6 49 1 &pmx0 7 49 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk11>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio12: gpio@fc812000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc812000 0x1000>;
+ interrupts = <0 76 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+ &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+ &pmx0 6 51 1 &pmx0 7 52 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk12>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio13: gpio@fc813000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc813000 0x1000>;
+ interrupts = <0 77 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+ &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+ &pmx0 6 55 1 &pmx0 7 56 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk13>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio14: gpio@fc814000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc814000 0x1000>;
+ interrupts = <0 78 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+ &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+ &pmx0 6 60 1 &pmx0 7 61 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk14>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio15: gpio@fc815000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc815000 0x1000>;
+ interrupts = <0 79 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+ &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+ &pmx0 6 64 1 &pmx0 7 65 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk15>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio16: gpio@fc816000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc816000 0x1000>;
+ interrupts = <0 80 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+ &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+ &pmx0 6 72 1 &pmx0 7 73 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk16>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio17: gpio@fc817000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc817000 0x1000>;
+ interrupts = <0 81 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+ &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+ &pmx0 6 80 1 &pmx0 7 81 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk17>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio18: gpio@fc818000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc818000 0x1000>;
+ interrupts = <0 82 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+ &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+ &pmx0 6 86 1 &pmx0 7 87 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk18>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio19: gpio@fc819000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc819000 0x1000>;
+ interrupts = <0 83 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+ &pmx0 3 88 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk19>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio20: gpio@fc81a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81a000 0x1000>;
+ interrupts = <0 84 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+ &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk20>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ gpio21: gpio@fc81b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81b000 0x1000>;
+ interrupts = <0 85 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk21>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ pmx0: pinmux@fc803000 {
+ compatible = "pinctrl-single";
+ reg = <0xfc803000 0x188>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+ &range 12 1 0 &range 13 29 1
+ &range 43 1 0 &range 44 49 1
+ &range 94 1 1 &range 96 2 1>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ pmx1: pinmux@fc803800 {
+ compatible = "pinconf-single";
+ reg = <0xfc803800 0x2dc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,738 @@
+/*
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "hi3620.dtsi"
+
+/ {
+ model = "Hisilicon Hi4511 Development Board";
+ compatible = "hisilicon,hi3620-hi4511";
+
+ chosen {
+ bootargs = "console=ttyAMA0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on mem=512m earlyprintk";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ amba {
+ timer0: timer@fc800000 {
+ status = "ok";
+ };
+
+ uart0: uart@fcb00000 { /* console */
+/*
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+*/
+ status = "ok";
+ };
+
+ uart1: uart@fcb01000 { /* modem */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+ status = "ok";
+ };
+
+ uart2: uart@fcb02000 { /* audience */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+ status = "ok";
+ };
+
+ uart3: uart@fcb03000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+ status = "ok";
+ };
+
+ uart4: uart@fcb04000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+ status = "ok";
+ };
+
+ gpio0: gpio@fc806000 {
+ status = "ok";
+ };
+
+ gpio1: gpio@fc807000 {
+ status = "ok";
+ };
+
+ gpio2: gpio@fc808000 {
+ status = "ok";
+ };
+
+ gpio3: gpio@fc809000 {
+ status = "ok";
+ };
+
+ gpio4: gpio@fc80a000 {
+ status = "ok";
+ };
+
+ gpio5: gpio@fc80b000 {
+ status = "ok";
+ };
+
+ gpio6: gpio@fc80c000 {
+ status = "ok";
+ };
+
+ gpio7: gpio@fc80d000 {
+ status = "ok";
+ };
+
+ gpio8: gpio@fc80e000 {
+ status = "ok";
+ };
+
+ gpio9: gpio@fc80f000 {
+ status = "ok";
+ };
+
+ gpio10: gpio@fc810000 {
+ status = "ok";
+ };
+
+ gpio11: gpio@fc811000 {
+ status = "ok";
+ };
+
+ gpio12: gpio@fc812000 {
+ status = "ok";
+ };
+
+ gpio13: gpio@fc813000 {
+ status = "ok";
+ };
+
+ gpio14: gpio@fc814000 {
+ status = "ok";
+ };
+
+ gpio15: gpio@fc815000 {
+ status = "ok";
+ };
+
+ gpio16: gpio@fc816000 {
+ status = "ok";
+ };
+
+ gpio17: gpio@fc817000 {
+ status = "ok";
+ };
+
+ gpio18: gpio@fc818000 {
+ status = "ok";
+ };
+
+ gpio19: gpio@fc819000 {
+ status = "ok";
+ };
+
+ gpio20: gpio@fc81a000 {
+ status = "ok";
+ };
+
+ gpio21: gpio@fc81b000 {
+ status = "ok";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ call {
+ label = "call";
+ gpios = <&gpio17 2 0>;
+ linux,code = <169>; /* KEY_PHONE */
+ };
+ };
+
+ pmx0: pinmux@fc803000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func>;
+
+ board_pmx_pins: pinmux_board_pmx_pins {
+ pinctrl-single,pins = <
+ 0x008 0x0 /* GPIO -- eFUSE_DOUT */
+ 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */
+ 0x104 0x0 /* USIM_RST (IOMG96) */
+ >;
+ };
+ uart0_pmx_func: pinmux_uart0_pins@0 {
+ pinctrl-single,pins = <
+ 0x0f0 0x0
+ 0x0f4 0x0 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart0_pmx_idle: pinmux_uart0_pins@1 {
+ pinctrl-single,pins = <
+ /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */
+ 0x0f4 0x1 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart1_pmx_func: pinmux_uart1_pins@0 {
+ pinctrl-single,pins = <
+ 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */
+ 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */
+ >;
+ };
+ uart1_pmx_idle: pinmux_uart1_pins@1 {
+ pinctrl-single,pins = <
+ 0x0f8 0x1 /* GPIO (IOMG61) */
+ 0x0fc 0x1 /* GPIO (IOMG62) */
+ >;
+ };
+ uart2_pmx_func: pinmux_uart2_pins@0 {
+ pinctrl-single,pins = <
+ 0x104 0x2 /* UART2_RXD (IOMG96) */
+ 0x108 0x2 /* UART2_TXD (IOMG64) */
+ >;
+ };
+ uart2_pmx_idle: pinmux_uart2_pins@1 {
+ pinctrl-single,pins = <
+ 0x104 0x1 /* GPIO (IOMG96) */
+ 0x108 0x1 /* GPIO (IOMG64) */
+ >;
+ };
+ uart3_pmx_func: pinmux_uart3_pins@0 {
+ pinctrl-single,pins = <
+ 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */
+ 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */
+ >;
+ };
+ uart3_pmx_idle: pinmux_uart3_pins@1 {
+ pinctrl-single,pins = <
+ 0x160 0x1 /* GPIO (IOMG85) */
+ 0x164 0x1 /* GPIO (IOMG86) */
+ >;
+ };
+ uart4_pmx_func: pinmux_uart4_pins@0 {
+ pinctrl-single,pins = <
+ 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */
+ 0x16c 0x0 /* UART4_RXD (IOMG88) */
+ 0x170 0x0 /* UART4_TXD (IOMG93) */
+ >;
+ };
+ uart4_pmx_idle: pinmux_uart4_pins@1 {
+ pinctrl-single,pins = <
+ 0x168 0x1 /* GPIO (IOMG87) */
+ 0x16c 0x1 /* GPIO (IOMG88) */
+ 0x170 0x1 /* GPIO (IOMG93) */
+ >;
+ };
+ i2c0_pmx_func: pinmux_i2c0_pins@0 {
+ pinctrl-single,pins = <
+ 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */
+ >;
+ };
+ i2c0_pmx_idle: pinmux_i2c0_pins@1 {
+ pinctrl-single,pins = <
+ 0x0b4 0x1 /* GPIO (IOMG45) */
+ >;
+ };
+ i2c1_pmx_func: pinmux_i2c1_pins@0 {
+ pinctrl-single,pins = <
+ 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */
+ >;
+ };
+ i2c1_pmx_idle: pinmux_i2c1_pins@1 {
+ pinctrl-single,pins = <
+ 0x0b8 0x1 /* GPIO (IOMG46) */
+ >;
+ };
+ i2c2_pmx_func: pinmux_i2c2_pins@0 {
+ pinctrl-single,pins = <
+ 0x068 0x0 /* I2C2_SCL (IOMG26) */
+ 0x06c 0x0 /* I2C2_SDA (IOMG27) */
+ >;
+ };
+ i2c2_pmx_idle: pinmux_i2c2_pins@0 {
+ pinctrl-single,pins = <
+ 0x068 0x1 /* GPIO (IOMG26) */
+ 0x06c 0x1 /* GPIO (IOMG27) */
+ >;
+ };
+ i2c3_pmx_func: pinmux_i2c3_pins@0 {
+ pinctrl-single,pins = <
+ 0x050 0x2 /* I2C3_SCL (IOMG20) */
+ 0x054 0x2 /* I2C3_SDA (IOMG21) */
+ >;
+ };
+ i2c3_pmx_idle: pinmux_i2c3_pins@0 {
+ pinctrl-single,pins = <
+ 0x050 0x1 /* GPIO (IOMG20) */
+ 0x054 0x1 /* GPIO (IOMG21) */
+ >;
+ };
+ spi0_pmx_func: pinmux_spi0_pins@0 {
+ pinctrl-single,pins = <
+ 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+ 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */
+ 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */
+ 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */
+ 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */
+ >;
+ };
+ spi0_pmx_idle: pinmux_spi0_pins@1 {
+ pinctrl-single,pins = <
+ 0x0d4 0x1 /* GPIO (IOMG53) */
+ 0x0d8 0x1 /* GPIO (IOMG54) */
+ 0x0dc 0x1 /* GPIO (IOMG55) */
+ 0x0e0 0x1 /* GPIO (IOMG56) */
+ 0x0e4 0x1 /* GPIO (IOMG57) */
+ >;
+ };
+ spi1_pmx_func: pinmux_spi1_pins@0 {
+ pinctrl-single,pins = <
+ 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */
+ 0x0e8 0x0 /* SPI1_DO (IOMG58) */
+ 0x0ec 0x0 /* SPI1_CS (IOMG95) */
+ >;
+ };
+ spi1_pmx_idle: pinmux_spi1_pins@1 {
+ pinctrl-single,pins = <
+ 0x184 0x1 /* GPIO (IOMG98) */
+ 0x0e8 0x1 /* GPIO (IOMG58) */
+ 0x0ec 0x1 /* GPIO (IOMG95) */
+ >;
+ };
+ kpc_pmx_func: pinmux_kpc_pins@0 {
+ pinctrl-single,pins = <
+ 0x12c 0x0 /* KEY_IN0 (IOMG73) */
+ 0x130 0x0 /* KEY_IN1 (IOMG74) */
+ 0x134 0x0 /* KEY_IN2 (IOMG75) */
+ 0x10c 0x0 /* KEY_OUT0 (IOMG65) */
+ 0x110 0x0 /* KEY_OUT1 (IOMG66) */
+ 0x114 0x0 /* KEY_OUT2 (IOMG67) */
+ >;
+ };
+ kpc_pmx_idle: pinmux_kpc_pins@1 {
+ pinctrl-single,pins = <
+ 0x12c 0x1 /* GPIO (IOMG73) */
+ 0x130 0x1 /* GPIO (IOMG74) */
+ 0x134 0x1 /* GPIO (IOMG75) */
+ 0x10c 0x1 /* GPIO (IOMG65) */
+ 0x110 0x1 /* GPIO (IOMG66) */
+ 0x114 0x1 /* GPIO (IOMG67) */
+ >;
+ };
+ gpio_key_func: pinmux_gpiokey_pins {
+ pinctrl-single,pins = <
+ 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */
+ 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */
+ >;
+ };
+ emmc_pmx_func: pinmux_emmc_pins@0 {
+ pinctrl-single,pins = <
+ 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */
+ >;
+ };
+ emmc_pmx_idle: pinmux_emmc_pins@1 {
+ pinctrl-single,pins = <
+ 0x030 0x0 /* GPIO (IOMG12) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sd_pmx_func: pinmux_sd_pins@0 {
+ pinctrl-single,pins = <
+ 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+ 0x0c0 0x0 /* SD_DATA3 (IOMG48) */
+ >;
+ };
+ sd_pmx_idle: pinmux_sd_pins@1 {
+ pinctrl-single,pins = <
+ 0x0bc 0x1 /* GPIO (IOMG47) */
+ 0x0c0 0x1 /* GPIO (IOMG48) */
+ >;
+ };
+ nand_pmx_func: pinmux_nand_pins@0 {
+ pinctrl-single,pins = <
+ 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+ 0x010 0x0 /* NAND_CS1_N (IOMG4) */
+ 0x014 0x0 /* NAND_CS2_N (IOMG5) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */
+ 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */
+ >;
+ };
+ nand_pmx_idle: pinmux_nand_pins@1 {
+ pinctrl-single,pins = <
+ 0x00c 0x1 /* GPIO (IOMG3) */
+ 0x010 0x1 /* GPIO (IOMG4) */
+ 0x014 0x1 /* GPIO (IOMG5) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x01c 0x1 /* GPIO (IOMG94) */
+ 0x020 0x1 /* GPIO (IOMG7) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sdio_pmx_func: pinmux_sdio_pins@0 {
+ pinctrl-single,pins = <
+ 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+ >;
+ };
+ sdio_pmx_idle: pinmux_sdio_pins@1 {
+ pinctrl-single,pins = <
+ 0x0c4 0x1 /* GPIO (IOMG49) */
+ >;
+ };
+ audio_out_pmx_func: pinmux_audio_pins@0 {
+ pinctrl-single,pins = <
+ 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */
+ >;
+ };
+ };
+
+ pmx1: pinmux@fc803800 {
+ pinctrl-names = "default";
+ pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins
+ &board_np_pins &board_ps_pins &kpc_cfg_func
+ &audio_out_cfg_func>;
+ board_pu_pins: pinmux_board_pu_pins {
+ pinctrl-single,pins = <
+ 0x014 0 /* GPIO_158 (IOCFG2) */
+ 0x018 0 /* GPIO_159 (IOCFG3) */
+ 0x01c 0 /* BOOT_MODE0 (IOCFG4) */
+ 0x020 0 /* BOOT_MODE1 (IOCFG5) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ };
+ board_pd_pins: pinmux_board_pd_pins {
+ pinctrl-single,pins = <
+ 0x038 0 /* eFUSE_DOUT (IOCFG11) */
+ 0x150 0 /* ISP_GPIO8 (IOCFG93) */
+ 0x154 0 /* ISP_GPIO9 (IOCFG94) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_pd_ps_pins: pinmux_board_pd_ps_pins {
+ pinctrl-single,pins = <
+ 0x2d8 0 /* CLK_OUT0 (IOCFG190) */
+ 0x004 0 /* PMU_SPI_DATA (IOCFG192) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ board_np_pins: pinmux_board_np_pins {
+ pinctrl-single,pins = <
+ 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_ps_pins: pinmux_board_ps_pins {
+ pinctrl-single,pins = <
+ 0x000 0 /* PMU_SPI_CLK (IOCFG191) */
+ 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */
+ >;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ uart0_cfg_func: pincfg_uart0_pins@0 {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart0_cfg_idle: pincfg_uart0_pins@1 {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_func: pincfg_uart1_pins@0 {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_idle: pincfg_uart1_pins@2 {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_func: pincfg_uart2_pins@0 {
+ pinctrl-single,pins = <
+ 0x220 0 /* UART2_CTS (IOCFG144) */
+ 0x224 0 /* UART2_RTS (IOCFG145) */
+ 0x228 0 /* UART2_RXD (IOCFG146) */
+ 0x22c 0 /* UART2_TXD (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_idle: pincfg_uart2_pins@1 {
+ pinctrl-single,pins = <
+ 0x220 0 /* GPIO (IOCFG144) */
+ 0x224 0 /* GPIO (IOCFG145) */
+ 0x228 0 /* GPIO (IOCFG146) */
+ 0x22c 0 /* GPIO (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_func: pincfg_uart3_pins@0 {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_idle: pincfg_uart3_pins@1 {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart4_cfg_func: pincfg_uart4_pins@0 {
+ pinctrl-single,pins = <
+ 0x2a4 0 /* UART4_CTS (IOCFG177) */
+ 0x2a8 0 /* UART4_RTS (IOCFG178) */
+ 0x2ac 0 /* UART4_RXD (IOCFG179) */
+ 0x2b0 0 /* UART4_TXD (IOCFG180) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ i2c0_cfg_func: pincfg_i2c0_pins@0 {
+ pinctrl-single,pins = <
+ 0x17c 0 /* I2C0_SCL (IOCFG103) */
+ 0x180 0 /* I2C0_SDA (IOCFG104) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c1_cfg_func: pincfg_i2c1_pins@0 {
+ pinctrl-single,pins = <
+ 0x184 0 /* I2C1_SCL (IOCFG105) */
+ 0x188 0 /* I2C1_SDA (IOCFG106) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c2_cfg_func: pincfg_i2c2_pins@0 {
+ pinctrl-single,pins = <
+ 0x118 0 /* I2C2_SCL (IOCFG79) */
+ 0x11c 0 /* I2C2_SDA (IOCFG80) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c3_cfg_func: pincfg_i2c3_pins@0 {
+ pinctrl-single,pins = <
+ 0x100 0 /* I2C3_SCL (IOCFG73) */
+ 0x104 0 /* I2C3_SDA (IOCFG74) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func1: pincfg_spi0_f1_pins@0 {
+ pinctrl-single,pins = <
+ 0x1d4 0 /* SPI0_CLK (IOCFG125) */
+ 0x1d8 0 /* SPI0_DI (IOCFG126) */
+ 0x1dc 0 /* SPI0_DO (IOCFG127) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func2: pincfg_spi0_f2_pins@0 {
+ pinctrl-single,pins = <
+ 0x1e0 0 /* SPI0_CS0 (IOCFG128) */
+ 0x1e4 0 /* SPI0_CS1 (IOCFG129) */
+ 0x1e8 0 /* SPI0_CS2 (IOCFG130 */
+ 0x1ec 0 /* SPI0_CS3 (IOCFG131) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func1: pincfg_spi1_f1_pins@0 {
+ pinctrl-single,pins = <
+ 0x1f0 0 /* SPI1_CLK (IOCFG132) */
+ 0x1f4 0 /* SPI1_DI (IOCFG133) */
+ 0x1f8 0 /* SPI1_DO (IOCFG134) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func2: pincfg_spi1_f2_pins@0 {
+ pinctrl-single,pins = <
+ 0x1fc 0 /* SPI1_CS (IOCFG135) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ kpc_cfg_func: pincfg_kpc_pins@0 {
+ pinctrl-single,pins = <
+ 0x250 0 /* KEY_IN0 (IOCFG156) */
+ 0x254 0 /* KEY_IN1 (IOCFG157) */
+ 0x258 0 /* KEY_IN2 (IOCFG158) */
+ 0x230 0 /* KEY_OUT0 (IOCFG148) */
+ 0x234 0 /* KEY_OUT1 (IOCFG149) */
+ 0x238 0 /* KEY_OUT2 (IOCFG150) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ emmc_cfg_func: pincfg_emmc_pins@0 {
+ pinctrl-single,pins = <
+ 0x0ac 0 /* eMMC_CMD (IOCFG40) */
+ 0x0b0 0 /* eMMC_CLK (IOCFG41) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func1: pincfg_sd_f1_pins@0 {
+ pinctrl-single,pins = <
+ 0x18c 0 /* SD_CLK (IOCFG107) */
+ 0x190 0 /* SD_CMD (IOCFG108) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func2: pincfg_sd_f2_pins@0 {
+ pinctrl-single,pins = <
+ 0x194 0 /* SD_DATA0 (IOCFG109) */
+ 0x198 0 /* SD_DATA1 (IOCFG110) */
+ 0x19c 0 /* SD_DATA2 (IOCFG111) */
+ 0x1a0 0 /* SD_DATA3 (IOCFG112) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x70 0xf0>;
+ };
+ nand_cfg_func1: pincfg_nand_f1_pins@0 {
+ pinctrl-single,pins = <
+ 0x03c 0 /* NAND_ALE (IOCFG12) */
+ 0x040 0 /* NAND_CLE (IOCFG13) */
+ 0x06c 0 /* NAND_DATA0 (IOCFG24) */
+ 0x070 0 /* NAND_DATA1 (IOCFG25) */
+ 0x074 0 /* NAND_DATA2 (IOCFG26) */
+ 0x078 0 /* NAND_DATA3 (IOCFG27) */
+ 0x07c 0 /* NAND_DATA4 (IOCFG28) */
+ 0x080 0 /* NAND_DATA5 (IOCFG29) */
+ 0x084 0 /* NAND_DATA6 (IOCFG30) */
+ 0x088 0 /* NAND_DATA7 (IOCFG31) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ nand_cfg_func2: pincfg_nand_f2_pins@0 {
+ pinctrl-single,pins = <
+ 0x044 0 /* NAND_RE_N (IOCFG14) */
+ 0x048 0 /* NAND_WE_N (IOCFG15) */
+ 0x04c 0 /* NAND_CS0_N (IOCFG16) */
+ 0x050 0 /* NAND_CS1_N (IOCFG17) */
+ 0x054 0 /* NAND_CS2_N (IOCFG18) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */
+ 0x060 0 /* NAND_BUSY1_N (IOCFG21) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sdio_cfg_func: pincfg_sdio_pins@0 {
+ pinctrl-single,pins = <
+ 0x1a4 0 /* SDIO0_CLK (IOCG113) */
+ 0x1a8 0 /* SDIO0_CMD (IOCG114) */
+ 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */
+ 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */
+ 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */
+ 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ audio_out_cfg_func: pincfg_audio_pins@0 {
+ pinctrl-single,pins = <
+ 0x200 0 /* GPIO (IOCFG136) */
+ 0x204 0 /* GPIO (IOCFG137) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ };
+ };
+};
Enable Hisilicon Hi4511 development platform with device tree support. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/hi3620.dtsi | 1155 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/hi4511.dts | 738 ++++++++++++++++++++++++++ 3 files changed, 1894 insertions(+) create mode 100644 arch/arm/boot/dts/hi3620.dtsi create mode 100644 arch/arm/boot/dts/hi4511.dts