@@ -15,7 +15,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
@@ -25,7 +25,6 @@
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
@@ -222,12 +221,17 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
* Board specific chip select logic decides the polarity and cs
* line for the controller
*/
- if (spi->cs_gpio >= 0) {
+ if (spi->cs_gpiod) {
+ /*
+ * FIXME: is this code ever executed? This host does not
+ * set SPI_MASTER_GPIO_SS so this chipselect callback should
+ * not get called from the SPI core when we are using
+ * GPIOs for chip select.
+ */
if (value == BITBANG_CS_ACTIVE)
- gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH);
+ gpiod_set_value(spi->cs_gpiod, 1);
else
- gpio_set_value(spi->cs_gpio,
- !(spi->mode & SPI_CS_HIGH));
+ gpiod_set_value(spi->cs_gpiod, 0);
} else {
if (value == BITBANG_CS_ACTIVE) {
if (!(spi->mode & SPI_CS_WORD))
@@ -418,7 +422,6 @@ static int davinci_spi_of_setup(struct spi_device *spi)
*/
static int davinci_spi_setup(struct spi_device *spi)
{
- int retval = 0;
struct davinci_spi *dspi;
struct spi_master *master = spi->master;
struct device_node *np = spi->dev.of_node;
@@ -427,21 +430,11 @@ static int davinci_spi_setup(struct spi_device *spi)
dspi = spi_master_get_devdata(spi->master);
if (!(spi->mode & SPI_NO_CS)) {
- if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
- retval = gpio_direction_output(
- spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+ if (np && spi->cs_gpiod)
internal_cs = false;
- }
-
- if (retval) {
- dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
- spi->cs_gpio, retval);
- return retval;
- }
- if (internal_cs) {
+ if (internal_cs)
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
- }
}
if (spi->mode & SPI_READY)
@@ -962,6 +955,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
if (ret)
goto free_master;
+ master->use_gpio_descriptors = true;
master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
@@ -980,27 +974,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
if (dspi->version == SPI_VERSION_2)
dspi->bitbang.flags |= SPI_READY;
- if (pdev->dev.of_node) {
- int i;
-
- for (i = 0; i < pdata->num_chipselect; i++) {
- int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
- "cs-gpios", i);
-
- if (cs_gpio == -EPROBE_DEFER) {
- ret = cs_gpio;
- goto free_clk;
- }
-
- if (gpio_is_valid(cs_gpio)) {
- ret = devm_gpio_request(&pdev->dev, cs_gpio,
- dev_name(&pdev->dev));
- if (ret)
- goto free_clk;
- }
- }
- }
-
dspi->bitbang.txrx_bufs = davinci_spi_bufs;
ret = davinci_spi_request_dma(dspi);
This converts the DaVinci SPI master driver to use GPIO descriptors for chip select handling. DaVinci parses the device tree a second time for the chip select GPIOs (no relying on the parsing already happening in the SPI core) and handles inversion semantics locally. We simply drop the extra parsing and set up and move the CS handling to the core and gpiolib. The fact that the driver is actively driving the GPIO in the davinci_spi_chipselect() callback is confusing since the host does not set SPI_MASTER_GPIO_SS so this should not ever get called when using GPIO CS. I put in a comment about this. This driver also supports instantiation from board files, but these are all using native chip selects so no problem with GPIO lines here. Cc: David Lechner <david@lechnology.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Linuxarm <linuxarm@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/spi/spi-davinci.c | 53 ++++++++++----------------------------- 1 file changed, 13 insertions(+), 40 deletions(-) -- 2.19.2