diff mbox series

[v2,9/9] cpufreq: scpi: Use auto-registration of thermal cooling device

Message ID 95506c9919bee528838016dd2c857ebb28e19152.1548084260.git.amit.kucheria@linaro.org
State Accepted
Commit cb772b8ce4b9f5353c34f4d38ab0c697c0071625
Headers show
Series None | expand

Commit Message

Amit Kucheria Jan. 21, 2019, 3:40 p.m. UTC 
Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to
automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

Acked-by: Sudeep Holla <sudeep.holla@arm.com>

---
 drivers/cpufreq/scpi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index 99449738faa4..82420e8e5f0d 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -22,7 +22,6 @@ 
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
@@ -34,7 +33,6 @@ 
 struct scpi_data {
 	struct clk *clk;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@  static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scpi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	clk_put(priv->clk);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
@@ -195,23 +192,16 @@  static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scpi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scpi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scpi_cpufreq_driver = {
 	.name	= "scpi-cpufreq",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.get	= scpi_cpufreq_get_rate,
 	.init	= scpi_cpufreq_init,
 	.exit	= scpi_cpufreq_exit,
-	.ready	= scpi_cpufreq_ready,
 	.target_index	= scpi_cpufreq_set_target,
 };