diff mbox series

[v2,13/25] qemu: Support interface model=virtio-{non-}transitional

Message ID 272f56b10751db3c58d90813ec59ab34f6a661fa.1548278585.git.crobinso@redhat.com
State New
Headers show
Series qemu: virtio-{non-}transitional support | expand

Commit Message

Cole Robinson Jan. 23, 2019, 9:32 p.m. UTC 
Add new <interface> model handling for virtio transitional devices. Ex:

<interface>
  <model type='virtio-transitional'/>
</interface>

* "virtio-transitional" maps to qemu "virtio-net-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional"

Signed-off-by: Cole Robinson <crobinso@redhat.com>

---
 src/conf/domain_conf.c                               |  4 +++-
 src/qemu/qemu_command.c                              |  8 +++++++-
 src/qemu/qemu_domain_address.c                       |  9 +++++++--
 .../virtio-non-transitional.x86_64-3.1.0.args        |  6 +++++-
 .../virtio-non-transitional.x86_64-latest.args       |  6 +++++-
 tests/qemuxml2argvdata/virtio-non-transitional.xml   |  4 ++++
 .../virtio-transitional.x86_64-3.1.0.args            |  5 ++++-
 .../virtio-transitional.x86_64-latest.args           |  5 ++++-
 tests/qemuxml2argvdata/virtio-transitional.xml       |  4 ++++
 tests/qemuxml2xmloutdata/virtio-non-transitional.xml | 12 +++++++++++-
 tests/qemuxml2xmloutdata/virtio-transitional.xml     |  7 ++++++-
 11 files changed, 60 insertions(+), 10 deletions(-)

-- 
2.20.1

--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list

Comments

Andrea Bolognani Jan. 29, 2019, 11:51 a.m. UTC | #1 
On Wed, 2019-01-23 at 16:32 -0500, Cole Robinson wrote:
> @@ -472,9 +472,15 @@ qemuBuildVirtioDevStr(virBufferPtr buf,

>              ntmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_BLK_PCI_NON_TRANSITIONAL;

>              break;

>  

> +        case VIR_DOMAIN_DEVICE_NET:

> +            has_tmodel = STREQ_NULLABLE(device.data.net->model, "virtio-transitional");

> +            has_ntmodel = STREQ_NULLABLE(device.data.net->model, "virtio-non-transitional");

> +            tmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_NET_PCI_TRANSITIONAL;

> +            ntmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_NET_PCI_NON_TRANSITIONAL;

> +            break;


Same comment as the previous patch, but I assume you're gonna
either change all of them or none of them, so I'm not gonna repeat
it for every patch :)

Reviewed-by: Andrea Bolognani <abologna@redhat.com>


-- 
Andrea Bolognani / Red Hat / Virtualization

--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
diff mbox series

Patch

diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index eeb1191677..0a59a4e91f 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -29852,7 +29852,9 @@  virDomainNetGetActualTrustGuestRxFilters(virDomainNetDefPtr iface)
 bool
 virDomainNetIsVirtioModel(const virDomainNetDef *net)
 {
-    return STREQ_NULLABLE(net->model, "virtio");
+    return (STREQ_NULLABLE(net->model, "virtio") ||
+            STREQ_NULLABLE(net->model, "virtio-transitional") ||
+            STREQ_NULLABLE(net->model, "virtio-non-transitional"));
 }
 
 
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 3cf0f5b13e..6ddfe2703c 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -472,9 +472,15 @@  qemuBuildVirtioDevStr(virBufferPtr buf,
             ntmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_BLK_PCI_NON_TRANSITIONAL;
             break;
 
+        case VIR_DOMAIN_DEVICE_NET:
+            has_tmodel = STREQ_NULLABLE(device.data.net->model, "virtio-transitional");
+            has_ntmodel = STREQ_NULLABLE(device.data.net->model, "virtio-non-transitional");
+            tmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_NET_PCI_TRANSITIONAL;
+            ntmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_NET_PCI_NON_TRANSITIONAL;
+            break;
+
         case VIR_DOMAIN_DEVICE_LEASE:
         case VIR_DOMAIN_DEVICE_FS:
-        case VIR_DOMAIN_DEVICE_NET:
         case VIR_DOMAIN_DEVICE_INPUT:
         case VIR_DOMAIN_DEVICE_SOUND:
         case VIR_DOMAIN_DEVICE_VIDEO:
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 808e551b9c..9f1a2dc9b8 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -692,8 +692,13 @@  qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
             return 0;
         }
 
-        if (STREQ_NULLABLE(net->model, "virtio"))
-            return  virtioFlags;
+        if (STREQ_NULLABLE(net->model, "virtio") ||
+            STREQ_NULLABLE(net->model, "virtio-non-transitional"))
+            return virtioFlags;
+
+        /* Transitional devices only work in conventional PCI slots */
+        if (STREQ_NULLABLE(net->model, "virtio-transitional"))
+            return pciFlags;
 
         if (STREQ_NULLABLE(net->model, "e1000e"))
             return pcieFlags;
diff --git a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args
index 70446f16f2..827b4070d4 100644
--- a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args
+++ b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args
@@ -26,9 +26,13 @@  file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
 -device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
 addr=0x1 \
 -device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
+-device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
--device virtio-blk-pci,disable-legacy=on,disable-modern=off,scsi=off,bus=pci.1,\
+-device virtio-blk-pci,disable-legacy=on,disable-modern=off,scsi=off,bus=pci.2,\
 addr=0x0,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
+-netdev user,id=hostnet0 \
+-device virtio-net-pci,disable-legacy=on,disable-modern=off,netdev=hostnet0,\
+id=net0,mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args
index 37078765bc..9a0eb9a1f3 100644
--- a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args
+++ b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args
@@ -26,9 +26,13 @@  file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
 -device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
 addr=0x1 \
 -device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
+-device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
--device virtio-blk-pci-non-transitional,scsi=off,bus=pci.1,addr=0x0,\
+-device virtio-blk-pci-non-transitional,scsi=off,bus=pci.2,addr=0x0,\
 drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
+-netdev user,id=hostnet0 \
+-device virtio-net-pci-non-transitional,netdev=hostnet0,id=net0,\
+mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-non-transitional.xml b/tests/qemuxml2argvdata/virtio-non-transitional.xml
index 7899994622..a1b35d1c07 100644
--- a/tests/qemuxml2argvdata/virtio-non-transitional.xml
+++ b/tests/qemuxml2argvdata/virtio-non-transitional.xml
@@ -12,6 +12,10 @@ 
       <source dev='/dev/HostVG/QEMUGuest1'/>
       <target dev='vda' bus='virtio'/>
     </disk>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:55'/>
+      <model type='virtio-non-transitional'/>
+    </interface>
     <controller type='usb' index='0' model='none'/>
     <memballoon model='none'/>
   </devices>
diff --git a/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args b/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args
index 356e8fdf4c..9b80cd893a 100644
--- a/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args
+++ b/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args
@@ -28,8 +28,11 @@  addr=0x1 \
 -device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
 -device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
--device virtio-blk-pci,scsi=off,bus=pci.2,addr=0x1,drive=drive-virtio-disk0,\
+-device virtio-blk-pci,scsi=off,bus=pci.2,addr=0x2,drive=drive-virtio-disk0,\
 id=virtio-disk0,bootindex=1 \
+-netdev user,id=hostnet0 \
+-device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.2,\
+addr=0x1 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args b/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args
index e78223eac8..46e139d492 100644
--- a/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args
+++ b/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args
@@ -28,8 +28,11 @@  addr=0x1 \
 -device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
 -device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
--device virtio-blk-pci-transitional,scsi=off,bus=pci.2,addr=0x1,\
+-device virtio-blk-pci-transitional,scsi=off,bus=pci.2,addr=0x2,\
 drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
+-netdev user,id=hostnet0 \
+-device virtio-net-pci-transitional,netdev=hostnet0,id=net0,\
+mac=00:11:22:33:44:55,bus=pci.2,addr=0x1 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-transitional.xml b/tests/qemuxml2argvdata/virtio-transitional.xml
index 678a7b9132..18f665577a 100644
--- a/tests/qemuxml2argvdata/virtio-transitional.xml
+++ b/tests/qemuxml2argvdata/virtio-transitional.xml
@@ -12,6 +12,10 @@ 
       <source dev='/dev/HostVG/QEMUGuest1'/>
       <target dev='vda' bus='virtio'/>
     </disk>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:55'/>
+      <model type='virtio-transitional'/>
+    </interface>
     <controller type='usb' index='0' model='none'/>
     <memballoon model='none'/>
   </devices>
diff --git a/tests/qemuxml2xmloutdata/virtio-non-transitional.xml b/tests/qemuxml2xmloutdata/virtio-non-transitional.xml
index 7e4aa16b32..f0dc7c0833 100644
--- a/tests/qemuxml2xmloutdata/virtio-non-transitional.xml
+++ b/tests/qemuxml2xmloutdata/virtio-non-transitional.xml
@@ -18,7 +18,7 @@ 
       <driver name='qemu' type='raw'/>
       <source dev='/dev/HostVG/QEMUGuest1'/>
       <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
     </disk>
     <controller type='usb' index='0' model='none'/>
     <controller type='sata' index='0'>
@@ -35,6 +35,16 @@ 
       <target chassis='2' port='0x9'/>
       <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
     </controller>
+    <controller type='pci' index='3' model='pcie-root-port'>
+      <model name='pcie-root-port'/>
+      <target chassis='3' port='0xa'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+    </controller>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:55'/>
+      <model type='virtio-non-transitional'/>
+      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
+    </interface>
     <input type='mouse' bus='ps2'/>
     <input type='keyboard' bus='ps2'/>
     <memballoon model='none'/>
diff --git a/tests/qemuxml2xmloutdata/virtio-transitional.xml b/tests/qemuxml2xmloutdata/virtio-transitional.xml
index c19e133bb3..f9729391a5 100644
--- a/tests/qemuxml2xmloutdata/virtio-transitional.xml
+++ b/tests/qemuxml2xmloutdata/virtio-transitional.xml
@@ -18,7 +18,7 @@ 
       <driver name='qemu' type='raw'/>
       <source dev='/dev/HostVG/QEMUGuest1'/>
       <target dev='vda' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/>
     </disk>
     <controller type='usb' index='0' model='none'/>
     <controller type='sata' index='0'>
@@ -39,6 +39,11 @@ 
       <target chassis='3' port='0x9'/>
       <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
     </controller>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:55'/>
+      <model type='virtio-transitional'/>
+      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/>
+    </interface>
     <input type='mouse' bus='ps2'/>
     <input type='keyboard' bus='ps2'/>
     <memballoon model='none'/>