@@ -4715,7 +4715,12 @@
<dd><span class="since">since 2.5.0</span>For SCSI devices, user
is responsible to make sure the device is not used by host. This
<code>type</code> passes all LUNs presented by a single HBA to
- the guest.
+ the guest. <span class="since">Since 5.1.0,</span> the
+ <code>model</code> attribute can be specified further
+ with "virtio-transitional", "virtio-non-transitional", or
+ "virtio". See
+ <a href="#elementsVirtioTransitional">Virtio transitional devices</a>
+ for more details.
</dd>
<dt><code>mdev</code></dt>
<dd>For mediated devices (<span class="since">Since 3.2.0</span>)
@@ -4630,6 +4630,15 @@
<attribute name="type">
<value>scsi_host</value>
</attribute>
+ <optional>
+ <attribute name="model">
+ <choice>
+ <value>virtio</value>
+ <value>virtio-transitional</value>
+ <value>virtio-non-transitional</value>
+ </choice>
+ </attribute>
+ </optional>
<element name="source">
<choice>
<group>
@@ -780,6 +780,14 @@ VIR_ENUM_IMPL(virDomainHostdevSubsysSCSIHostProtocol,
"vhost",
);
+VIR_ENUM_IMPL(virDomainHostdevSubsysSCSIVHostModel,
+ VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_LAST,
+ "default",
+ "virtio",
+ "virtio-transitional",
+ "virtio-non-transitional",
+);
+
VIR_ENUM_IMPL(virDomainHostdevCaps, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_LAST,
"storage",
"misc",
@@ -7800,6 +7808,7 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
int ret = -1;
virDomainHostdevSubsysPCIPtr pcisrc = &def->source.subsys.u.pci;
virDomainHostdevSubsysSCSIPtr scsisrc = &def->source.subsys.u.scsi;
+ virDomainHostdevSubsysSCSIVHostPtr scsihostsrc = &def->source.subsys.u.scsi_host;
virDomainHostdevSubsysMediatedDevPtr mdevsrc = &def->source.subsys.u.mdev;
/* @managed can be read from the xml document - it is always an
@@ -7882,14 +7891,26 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
}
}
- if (def->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV) {
+ if (def->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV &&
+ def->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) {
if (model) {
- virReportError(VIR_ERR_XML_ERROR, "%s",
- _("'model' attribute in <hostdev> is only supported "
- "when type='mdev'"));
+ virReportError(VIR_ERR_XML_ERROR,
+ _("'model' attribute in <hostdev> is not supported "
+ "for type='%s'"),
+ virDomainHostdevSubsysTypeToString(def->source.subsys.type));
goto cleanup;
}
- } else {
+ }
+
+ if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) {
+ if (model &&
+ ((scsihostsrc->model = virDomainHostdevSubsysSCSIVHostModelTypeFromString(model)) < 0)) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("unknown hostdev model '%s'"),
+ model);
+ goto cleanup;
+ }
+ } else if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV) {
if (!model) {
virReportError(VIR_ERR_XML_ERROR, "%s",
_("Missing 'model' attribute in mediated device's "
@@ -27301,6 +27322,7 @@ virDomainHostdevDefFormat(virBufferPtr buf,
const char *mode = virDomainHostdevModeTypeToString(def->mode);
virDomainHostdevSubsysSCSIPtr scsisrc = &def->source.subsys.u.scsi;
virDomainHostdevSubsysMediatedDevPtr mdevsrc = &def->source.subsys.u.mdev;
+ virDomainHostdevSubsysSCSIVHostPtr scsihostsrc = &def->source.subsys.u.scsi_host;
const char *type;
if (!mode) {
@@ -27351,6 +27373,12 @@ virDomainHostdevDefFormat(virBufferPtr buf,
virTristateBoolTypeToString(scsisrc->rawio));
}
+ if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST &&
+ scsihostsrc->model) {
+ virBufferAsprintf(buf, " model='%s'",
+ virDomainHostdevSubsysSCSIVHostModelTypeToString(scsihostsrc->model));
+ }
+
if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV) {
virBufferAsprintf(buf, " model='%s'",
virMediatedDeviceModelTypeToString(mdevsrc->model));
@@ -394,11 +394,23 @@ typedef enum {
VIR_ENUM_DECL(virDomainHostdevSubsysSCSIHostProtocol);
+typedef enum {
+ VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_DEFAULT,
+ VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO,
+ VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_TRANSITIONAL,
+ VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_NON_TRANSITIONAL,
+
+ VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_LAST,
+} virDomainHostdevSubsysSCSIVHostModelType;
+
+VIR_ENUM_DECL(virDomainHostdevSubsysSCSIVHostModel);
+
typedef struct _virDomainHostdevSubsysSCSIVHost virDomainHostdevSubsysSCSIVHost;
typedef virDomainHostdevSubsysSCSIVHost *virDomainHostdevSubsysSCSIVHostPtr;
struct _virDomainHostdevSubsysSCSIVHost {
int protocol; /* enum virDomainHostdevSubsysSCSIHostProtocolType */
char *wwpn;
+ int model; /* enum virDomainHostdevSubsysSCSIVHostModelType */
};
typedef struct _virDomainHostdevSubsys virDomainHostdevSubsys;
@@ -408,6 +408,8 @@ virDomainHostdevInsert;
virDomainHostdevModeTypeToString;
virDomainHostdevRemove;
virDomainHostdevSubsysPCIBackendTypeToString;
+virDomainHostdevSubsysSCSIVHostModelTypeFromString;
+virDomainHostdevSubsysSCSIVHostModelTypeToString;
virDomainHostdevSubsysTypeToString;
virDomainHPTResizingTypeToString;
virDomainHubTypeFromString;
@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
addr=0x1 \
-device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
-device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
+-device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci,disable-legacy=on,disable-modern=off,scsi=off,bus=pci.2,\
addr=0x0,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci,disable-legacy=on,disable-modern=off,netdev=hostnet0,\
id=net0,mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
addr=0x1 \
-device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
-device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
+-device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci-non-transitional,scsi=off,bus=pci.2,addr=0x0,\
drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci-non-transitional,netdev=hostnet0,id=net0,\
mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
@@ -15,6 +15,9 @@
<mac address='00:11:22:33:44:55'/>
<model type='virtio-non-transitional'/>
</interface>
+ <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-non-transitional'>
+ <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+ </hostdev>
<controller type='usb' index='0' model='none'/>
<memballoon model='none'/>
</devices>
@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
addr=0x1 \
-device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
-device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
+-device pcie-root-port,port=0xa,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x2 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci,disable-legacy=off,disable-modern=off,scsi=off,\
bus=pci.2,addr=0x2,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci,disable-legacy=off,disable-modern=off,netdev=hostnet0,\
id=net0,mac=00:11:22:33:44:55,bus=pci.2,addr=0x1 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
addr=0x1 \
-device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
-device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
+-device pcie-root-port,port=0xa,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x2 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci-transitional,scsi=off,bus=pci.2,addr=0x2,\
drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci-transitional,netdev=hostnet0,id=net0,\
mac=00:11:22:33:44:55,bus=pci.2,addr=0x1 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
@@ -15,6 +15,9 @@
<mac address='00:11:22:33:44:55'/>
<model type='virtio-transitional'/>
</interface>
+ <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-transitional'>
+ <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+ </hostdev>
<controller type='usb' index='0' model='none'/>
<memballoon model='none'/>
</devices>
@@ -40,6 +40,11 @@
<target chassis='3' port='0xa'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
+ <controller type='pci' index='4' model='pcie-root-port'>
+ <model name='pcie-root-port'/>
+ <target chassis='4' port='0xb'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/>
+ </controller>
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio-non-transitional'/>
@@ -47,6 +52,10 @@
</interface>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
+ <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-non-transitional'>
+ <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+ <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
+ </hostdev>
<memballoon model='none'/>
</devices>
</domain>
@@ -39,6 +39,11 @@
<target chassis='3' port='0x9'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
+ <controller type='pci' index='4' model='pcie-root-port'>
+ <model name='pcie-root-port'/>
+ <target chassis='4' port='0xa'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+ </controller>
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio-transitional'/>
@@ -46,6 +51,10 @@
</interface>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
+ <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-transitional'>
+ <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+ <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
+ </hostdev>
<memballoon model='none'/>
</devices>
</domain>
qemu vhost-scsi devices map to XML roughly like: <hostdev mode='subsystem' type='scsi_host'> <source protocol='vhost' wwpn=X/> </hostdev> To support vhost-scsi-pci-{non-}traditional in qemu, we need to to extend the SCSI Host hostdev XML to handle model= value. This matches the XML model= format used for mediated devices. This is just the domain_conf bits and some XML test cases. Use of virtio-X naming here does not match the hostdev protocol=vhost nor does it match the qemu vhost-X device naming, however it's more consistent with all other model= names in this area, and also matches the inconsistency of <vsock> devices which use model=virtio but map to vhost-vsock on the qemu commandline Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> --- docs/formatdomain.html.in | 7 +++- docs/schemas/domaincommon.rng | 9 +++++ src/conf/domain_conf.c | 38 ++++++++++++++++--- src/conf/domain_conf.h | 12 ++++++ src/libvirt_private.syms | 2 + .../virtio-non-transitional.x86_64-3.1.0.args | 3 ++ ...virtio-non-transitional.x86_64-latest.args | 3 ++ .../virtio-non-transitional.xml | 3 ++ .../virtio-transitional.x86_64-3.1.0.args | 3 ++ .../virtio-transitional.x86_64-latest.args | 3 ++ .../qemuxml2argvdata/virtio-transitional.xml | 3 ++ .../virtio-non-transitional.xml | 9 +++++ .../virtio-transitional.xml | 9 +++++ 13 files changed, 98 insertions(+), 6 deletions(-) -- 2.20.1 -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list