@@ -443,6 +443,18 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
val = QCA8K_PORT_PAD_RGMII_EN;
qca8k_write(priv, reg, val);
break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ /* RGMII_ID needs internal delay. This is enabled through
+ * PORT5_PAD_CTRL for all ports, rather than individual port
+ * registers
+ */
+ qca8k_write(priv, reg,
+ QCA8K_PORT_PAD_RGMII_EN |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
+ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
case PHY_INTERFACE_MODE_SGMII:
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
break;
RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode. Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode") Signed-off-by: Vinod Koul <vkoul@kernel.org> --- drivers/net/dsa/qca8k.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) -- 2.20.1