diff mbox

[3/3] serial/imx: parse from device tree support

Message ID 1298016730-22761-4-git-send-email-r64343@freescale.com
State New
Headers show

Commit Message

Jason Liu Feb. 18, 2011, 8:12 a.m. UTC 
Signed-off-by: Jason Liu <r64343@freescale.com>
---
 drivers/tty/serial/imx.c |   81 ++++++++++++++++++++++++++++++++++++++++------
 1 files changed, 71 insertions(+), 10 deletions(-)

Comments

Arnd Bergmann Feb. 18, 2011, 8:34 a.m. UTC | #1 
Hi Jason,

The patch looks good, but I noticed a few details that can be improved.

On Friday 18 February 2011, Jason Liu wrote:
> index dfcf4b1..3388599
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -52,6 +52,10 @@
>  #include <asm/irq.h>
>  #include <mach/hardware.h>
>  #include <mach/imx-uart.h>
> +#ifdef CONFIG_OF
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#endif /* CONFIG_OF */
>  
>  /* Register definitions */
>  #define URXD0 0x0  /* Receiver Register */

There is generally no need to enclose any header incudes in #ifdef.
If there is a problem in the header when included without CONFIG_OF set,
that should be fixed in the header.

> @@ -1224,6 +1228,54 @@ static int serial_imx_resume(struct platform_device *dev)
>         return 0;
>  }
>  
> +#ifdef CONFIG_OF
> +static int serial_imx_probe_dt(struct imx_port *sport,
> +               struct platform_device *pdev)
> +{
> +       struct device_node *node = pdev->dev.of_node;
> +       static int line;
> +
> +       if (!node)
> +               return -ENODEV;
> +
> +       if (of_get_property(node, "rts-cts", NULL))
> +               sport->have_rtscts = 1;
> +
> +#ifdef CONFIG_IRDA
> +       if (of_get_property(node, "irda", NULL))
> +               sport->use_irda = 1;
> +#endif
> +       sport->port.line = line++;
> +
> +       return 0;
> +}
> +#else
> +static int serial_imx_probe_dt(struct imx_port *sport,
> +               struct platform_device *pdev)
> +{
> +       return -ENODEV;
> +}
> +#endif

Similarly, there is no need to have the #ifdef CONFIG_IRDA here.
This one takes up a few bytes of probe code, but otherwise makes
the code more readable.

	Arnd
Shawn Guo Feb. 28, 2011, 10:35 a.m. UTC | #2 
On 18 February 2011 16:12, Jason Liu <r64343@freescale.com> wrote:
> Signed-off-by: Jason Liu <r64343@freescale.com>
> ---
>  drivers/tty/serial/imx.c |   81 ++++++++++++++++++++++++++++++++++++++++------
>  1 files changed, 71 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> old mode 100644
> new mode 100755

The file mode was changed to have 'x'?
Jason Hui March 7, 2011, 5:08 a.m. UTC | #3 
Hi, Arnd, Shawn,

On Mon, Feb 28, 2011 at 6:35 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On 18 February 2011 16:12, Jason Liu <r64343@freescale.com> wrote:
>> Signed-off-by: Jason Liu <r64343@freescale.com>
>> ---
>>  drivers/tty/serial/imx.c |   81 ++++++++++++++++++++++++++++++++++++++++------
>>  1 files changed, 71 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
>> old mode 100644
>> new mode 100755
>
> The file mode was changed to have 'x'?

Thanks for the review comments and I will come up with V2 patch soon.

BR,
Jason

>
> --
> Regards,
> Shawn
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>
diff mbox

Patch

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
old mode 100644
new mode 100755
index dfcf4b1..3388599
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -52,6 +52,10 @@ 
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
+#ifdef CONFIG_OF
+#include <linux/of.h>
+#include <linux/of_address.h>
+#endif /* CONFIG_OF */
 
 /* Register definitions */
 #define URXD0 0x0  /* Receiver Register */
@@ -1224,6 +1228,54 @@  static int serial_imx_resume(struct platform_device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static int serial_imx_probe_dt(struct imx_port *sport,
+		struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	static int line;
+
+	if (!node)
+		return -ENODEV;
+
+	if (of_get_property(node, "rts-cts", NULL))
+		sport->have_rtscts = 1;
+
+#ifdef CONFIG_IRDA
+	if (of_get_property(node, "irda", NULL))
+		sport->use_irda = 1;
+#endif
+	sport->port.line = line++;
+
+	return 0;
+}
+#else
+static int serial_imx_probe_dt(struct imx_port *sport,
+		struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif
+
+static int serial_imx_probe_pdata(struct imx_port *sport,
+		struct platform_device *pdev)
+{
+	struct imxuart_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return 0;
+
+	if (pdata->flags & IMXUART_HAVE_RTSCTS)
+		sport->have_rtscts = 1;
+
+#ifdef CONFIG_IRDA
+	if (pdata->flags & IMXUART_IRDA)
+		sport->use_irda = 1;
+#endif
+	sport->port.line = pdev->id;
+
+	return 0;
+}
 static int serial_imx_probe(struct platform_device *pdev)
 {
 	struct imx_port *sport;
@@ -1236,6 +1288,12 @@  static int serial_imx_probe(struct platform_device *pdev)
 	if (!sport)
 		return -ENOMEM;
 
+	ret = serial_imx_probe_dt(sport, pdev);
+	if (ret == -ENODEV)
+		ret = serial_imx_probe_pdata(sport, pdev);
+	if (ret)
+		goto free;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		ret = -ENODEV;
@@ -1260,7 +1318,6 @@  static int serial_imx_probe(struct platform_device *pdev)
 	sport->port.fifosize = 32;
 	sport->port.ops = &imx_pops;
 	sport->port.flags = UPF_BOOT_AUTOCONF;
-	sport->port.line = pdev->id;
 	init_timer(&sport->timer);
 	sport->timer.function = imx_timeout;
 	sport->timer.data     = (unsigned long)sport;
@@ -1274,17 +1331,13 @@  static int serial_imx_probe(struct platform_device *pdev)
 
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	imx_ports[pdev->id] = sport;
+	if (imx_ports[sport->port.line]) {
+		ret = -EBUSY;
+		goto clkput;
+	}
+	imx_ports[sport->port.line] = sport;
 
 	pdata = pdev->dev.platform_data;
-	if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
-		sport->have_rtscts = 1;
-
-#ifdef CONFIG_IRDA
-	if (pdata && (pdata->flags & IMXUART_IRDA))
-		sport->use_irda = 1;
-#endif
-
 	if (pdata && pdata->init) {
 		ret = pdata->init(pdev);
 		if (ret)
@@ -1336,6 +1389,11 @@  static int serial_imx_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id imx_uart_matches[] = {
+	{ .compatible = "imx-uart" },
+	{},
+};
+
 static struct platform_driver serial_imx_driver = {
 	.probe		= serial_imx_probe,
 	.remove		= serial_imx_remove,
@@ -1345,6 +1403,9 @@  static struct platform_driver serial_imx_driver = {
 	.driver		= {
 		.name	= "imx-uart",
 		.owner	= THIS_MODULE,
+#if defined(CONFIG_OF)
+		.of_match_table = imx_uart_matches,
+#endif
 	},
 };