@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
-adv7511-y := adv7511_drv.o
-adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
-adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
-adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
-obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
+drm-i2c-adv7511-y := adv7511_drv.o
+drm-i2c-adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
+drm-i2c-adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
+drm-i2c-adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += drm-i2c-adv7511.o
@@ -35,7 +35,8 @@ obj-$(CONFIG_VIDEO_ADV748X) += adv748x/
obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o
obj-$(CONFIG_VIDEO_ADV7842) += adv7842.o
obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o
-obj-$(CONFIG_VIDEO_ADV7511) += adv7511.o
+obj-$(CONFIG_VIDEO_ADV7511) += video-adv7511.o
+video-adv7511-objs := adv7511.o
obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
obj-$(CONFIG_VIDEO_VS6624) += vs6624.o
obj-$(CONFIG_VIDEO_BT819) += bt819.o
When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: warning: same module names found: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so the names matches the config fragment. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> --- This is only one issue that have been addressed. The other issue is that itseems to refer to the same device name in i2c_device_id, any guidance how that should be solved? Cheers, Anders drivers/gpu/drm/bridge/adv7511/Makefile | 10 +++++----- drivers/media/i2c/Makefile | 3 ++- 2 files changed, 7 insertions(+), 6 deletions(-) -- 2.20.1