| Message ID | 20190812141446.1090-1-linus.walleij@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | pinctrl: intel: baytrail: Pass irqchip when adding gpiochip | expand |
On Mon, Aug 12, 2019 at 04:14:46PM +0200, Linus Walleij wrote: > We need to convert all old gpio irqchips to pass the irqchip > setup along when adding the gpio_chip. For more info see > drivers/gpio/TODO. > > For chained irqchips this is a pretty straight-forward > conversion. Pushed to my review and testing queue, thanks! > > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > Cc: Thierry Reding <treding@nvidia.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Andy: when you're happy with this you can either supply an > ACK and I will merge it or you can merge it into your tree > for a later pull request, just tell me what you prefer. > --- > drivers/pinctrl/intel/pinctrl-baytrail.c | 38 ++++++++++++++---------- > 1 file changed, 22 insertions(+), 16 deletions(-) > > diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c > index e5a112a8e067..57faddca3710 100644 > --- a/drivers/pinctrl/intel/pinctrl-baytrail.c > +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c > @@ -1533,6 +1533,28 @@ static int byt_gpio_probe(struct byt_gpio *vg) > if (!vg->saved_context) > return -ENOMEM; > #endif > + > + /* set up interrupts */ > + irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0); > + if (irq_rc && irq_rc->start) { > + struct gpio_irq_chip *girq; > + > + byt_gpio_irq_init_hw(vg); > + > + girq = &gc->irq; > + girq->chip = &byt_irqchip; > + girq->parent_handler = byt_gpio_irq_handler; > + girq->num_parents = 1; > + girq->parents = devm_kcalloc(&vg->pdev->dev, 1, > + sizeof(*girq->parents), > + GFP_KERNEL); > + if (!girq->parents) > + return -ENOMEM; > + girq->parents[0] = (unsigned int)irq_rc->start; > + girq->default_type = IRQ_TYPE_NONE; > + girq->handler = handle_bad_irq; > + } > + > ret = devm_gpiochip_add_data(&vg->pdev->dev, gc, vg); > if (ret) { > dev_err(&vg->pdev->dev, "failed adding byt-gpio chip\n"); > @@ -1546,22 +1568,6 @@ static int byt_gpio_probe(struct byt_gpio *vg) > return ret; > } > > - /* set up interrupts */ > - irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0); > - if (irq_rc && irq_rc->start) { > - byt_gpio_irq_init_hw(vg); > - ret = gpiochip_irqchip_add(gc, &byt_irqchip, 0, > - handle_bad_irq, IRQ_TYPE_NONE); > - if (ret) { > - dev_err(&vg->pdev->dev, "failed to add irqchip\n"); > - return ret; > - } > - > - gpiochip_set_chained_irqchip(gc, &byt_irqchip, > - (unsigned)irq_rc->start, > - byt_gpio_irq_handler); > - } > - > return ret; > } > > -- > 2.21.0 > -- With Best Regards, Andy Shevchenko
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index e5a112a8e067..57faddca3710 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -1533,6 +1533,28 @@ static int byt_gpio_probe(struct byt_gpio *vg) if (!vg->saved_context) return -ENOMEM; #endif + + /* set up interrupts */ + irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0); + if (irq_rc && irq_rc->start) { + struct gpio_irq_chip *girq; + + byt_gpio_irq_init_hw(vg); + + girq = &gc->irq; + girq->chip = &byt_irqchip; + girq->parent_handler = byt_gpio_irq_handler; + girq->num_parents = 1; + girq->parents = devm_kcalloc(&vg->pdev->dev, 1, + sizeof(*girq->parents), + GFP_KERNEL); + if (!girq->parents) + return -ENOMEM; + girq->parents[0] = (unsigned int)irq_rc->start; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + } + ret = devm_gpiochip_add_data(&vg->pdev->dev, gc, vg); if (ret) { dev_err(&vg->pdev->dev, "failed adding byt-gpio chip\n"); @@ -1546,22 +1568,6 @@ static int byt_gpio_probe(struct byt_gpio *vg) return ret; } - /* set up interrupts */ - irq_rc = platform_get_resource(vg->pdev, IORESOURCE_IRQ, 0); - if (irq_rc && irq_rc->start) { - byt_gpio_irq_init_hw(vg); - ret = gpiochip_irqchip_add(gc, &byt_irqchip, 0, - handle_bad_irq, IRQ_TYPE_NONE); - if (ret) { - dev_err(&vg->pdev->dev, "failed to add irqchip\n"); - return ret; - } - - gpiochip_set_chained_irqchip(gc, &byt_irqchip, - (unsigned)irq_rc->start, - byt_gpio_irq_handler); - } - return ret; }
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Andy: when you're happy with this you can either supply an ACK and I will merge it or you can merge it into your tree for a later pull request, just tell me what you prefer. --- drivers/pinctrl/intel/pinctrl-baytrail.c | 38 ++++++++++++++---------- 1 file changed, 22 insertions(+), 16 deletions(-) -- 2.21.0